• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1015-1022
• /
• 2007

In this paper, we proposed a wideband design of planar inverted-F antenna(PIFA) using two-layer, patches and modified ground structure. The antenna consists of two layer patches with common feed and modified ground plane to control resonance frequency and antenna input impedance. The measured bandwidth is 1,492 MHz(BW: 67.7 %, 1,457${\sim}2,949$ MHz) for VSWR<2, and 1,170 MHz(BW: 21 %, 4,970${\sim}$6,140 MHz) for VSWR<2.5. It covers service bands of DCS1800, DCS1900, UMTS(WCDMA), WiBro, WLAN(IEEE 802.11b), satellite DMB. WLAN(IEEE 802.11a) in Korea and radiation patterns shows constant figure with frequency change.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.210-217
• /
• 2008

In this paper, the performance of equalization-based on-channel repeater for terrestrial DMB is analyzed. A primary concern in on-channel repeater is the performance degradation due to the echo and one of key component for on-channel repeater is the echo canceller, which usually employs LMS algorithm utilizing the repeater output as a reference for echo channel estimation and compensation. One problem using LMS algorithm is the tracking capability and there necessarily exists residual echo that has not been cancelled. To effectivelyremove the residual echo, we consider an equalization based on-channel repeater where the echo-cancellor is followed by an equalizer that performs channel estimation using pilot symbol and the channel inversion utilizing homomorphic decomposition. According to the simulation result, the performance degradation caused by the residual echo can be considerably alleviated by using the equalizer following the echo-canceller.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.184-184
• /
• 2001

The effect of neutral ligand(L) on the precursor characteristics of (hfac)Cu(I)-L and on Cu MOCVD Process was studied. The neutral ligands of (hac)Cu(I)-L$_{x}$, such as ATMS(allytrimethylsilane), VTMS(vinyltrimethylsilane), VCH(vinylcyclohexane), MP(4-methyl-1-pentene), ACP(allylcyclopentane), and DMB(3,3-dimethyl-1-butene) were investigated. When the dissociation temperature of Cu(I)-L bond is low, low temperature deposition below $100^{\circ}C$ is possible and the resistivity of the film is low. But thermal stability of the precursor is low in this case. The resistivity is almost the same regardless of L at the deposition temperature range of $125~175^{\circ}C$. The resistivity is increased as the molecular weight of L becomes higher above $225^{\circ}C$ The vapor pressure of the precursor was closely related to the boiling point of L, the lower the boiling point of L, the higher the vapor pressurere.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.185-190
• /
• 2001

The effect of neutral ligand(L) on the precursor characteristics of (hfac)Cu(I)-L and on Cu MOCVD Process was studied. The neutral ligands of (hac)Cu(I)-L$_{x}$, such as ATMS(allytrimethylsilane), VTMS(vinyltrimethylsilane), VCH(vinylcyclohexane), MP(4-methyl-1-pentene), ACP(allylcyclopentane), and DMB(3,3-dimethyl-1-butene) were investigated. When the dissociation temperature of Cu(I)-L bond is low, low temperature deposition below $100^{\circ}C$ is possible and the resistivity of the film is low. But thermal stability of the precursor is low in this case. The resistivity is almost the same regardless of L at the deposition temperature range of $125~175^{\circ}C$. The resistivity is increased as the molecular weight of L becomes higher above $225^{\circ}C$ The vapor pressure of the precursor was closely related to the boiling point of L, the lower the boiling point of L, the higher the vapor pressurere.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.2
• /
• pp.46-53
• /
• 2007

Extension of the mobile communication and the rapidly developing services connected with wireless multimedia(W-CDMA, DMB, Wibro, and so on) need great many base station transceiver systems, antennas, and many signal transmission line to embody these services. The min communication appliances system is exposed always in danger of transient overvoltage by direct stroke or induced lightning surge flowing in through antenna because the antenna of base station transceiver system or relay equipment is combined with expensive communication network equipments through signal transmission line. Now, gas discharge tube(GDT) or narrow band stub arrestor which is used by the surge protector for communication use is exposing limitations as for lightning surge protective means of the communication facility with high speed and wide frequency band. Therefore, for improving performance of surge arrestor, we applied ceramic filter which can reduce lightning surge invading from antenna effectively, and proved that ceramic filter is effective in residual voltage reduction through the experimental research.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.522-525
• /
• 2006

Recently, mobile devices support multi-functions such as 3D game, wireless internet, moving pictures, DMB, GPS, and PMP. Bigger size of display device is indispensable to support these functions and higher speed of the interface is needed. However, conventional parallel interfaces between processor and display nodule are not competent enough for that high speed transfers. High-speed serial interface is beginning to appear as an alternative for parallel interface. The advantages of the serial interface are high bandwidth, small number of interconnections, low-power consumption, and good quality of electro-magnetic interference. In this paper, we implement serial interface and use it for a display module. LVDS is used for PHY layer and a defined packet is used for link layer. The feature of the implemented serial interface is the reduced number of interconnections with enough bandwidth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4270-4284
• /
• 2013

This study is research of actual proof on verification of the user's utility about mobile convergence products and the types of convergence categorize into four types according to their characteristics. Four types of convergence; (1)Open service via scalable internet, (2)Close service dependent on mobile phones, (3)Broadcast services such as DMB, (4)Individual products such as camera based on digital technology. The purpose of research model is to identify differences in effect value of the types of mobile convergence according to its usage level and level of quality. As the result of this study, Usage level of open service/individual products had a significant effect on the user's utility about mobile convergence products, Also Level of quality of open service had a significant effect.

• Journal of Korea Multimedia Society
• /
• v.14 no.5
• /
• pp.614-621
• /
• 2011

This paper presents design of a wide tuning range digitally controlled oscillator(DCO) for Mobile-DTV applications. DCO is the key element of the ADPLL block that generates oscillation frequencies. We proposed a binary delay chain(BDC) structure, for wide tuning range DCO, modifying conventional fixed delay chain. The proposed structure generates oscillation frequencies by delay cell combination which has a variable delay time of $2^i$ in the range of $0{\leq}i{\leq}n-1$. The BOC structure can reduce the number of delay cells because it make possible to select delay cell and resolution. We simulated the proposed DCO by Cadence's Spectre RF tool in 1.8V chartered $0.18{\mu}m$ CMOS process. The simulation results showed 77MHz~2.07GHz frequency range and 3ps resolution. The phase noise yields -101dBc/Hz@1MHz at Mobile-DTV maximum frequency 1675MHz and the power consumption is 5.87mW. The proposed DCO satisfies Mobile-DTV standards such as ATSC-M/H, DVB-H, ISDB-T, T-DMB.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.5
• /
• pp.616-621
• /
• 2006

Recently many cars are equipping a navigation system. The main purpose of the early system guides a user through the route. A navigation system includes various abilities by development of various technologies and it has given more convenience to user. It can play various records on the tape and announces which are useful information about each road. Also it can use various multi-media contents by DMB device during driving. However, guide function of basic and important road in the navigation system has not grown greatly yet. In this paper, we proposed recommendation method of human-friendly road considering user's condition through various information of outside environment, user's velocity intention, a driver's emotion and a preference of the road. Modules consists of hierarchical structure that can easily correct and add each algorithm and those use fuzzy logic algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5C
• /
• pp.454-463
• /
• 2010

After the efficiency of H.264 video compression has been announced, it replaced MPEG-2 standard in several applications. So transcoding methods of MPEG-2 to H.264 have been studying because there are variety devices and contents followed by MPEG-2. Although H.264 supported various service such as IPTV, DMB, digital broadcasting etc, but users using MPEG-2 devices cannot accessible to them. This paper propose H.264 to MPEG-2 transcoding for users of MPEG-2 devices without displacement H.264. The proposed method predicted a motion vector for MPEG-2 encoder after it extracted from motion vectors of variable blocks in H.264 to improve processing time. Also it predicted a optimal motion vector using modified boundary matching algorithm after grasped a special character for boundary and background of object. The experimental results from proposed method show a considerable reduction in processing time, as much as 68% averagely, with a small objective quality reduction in PSNR.