• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.452-459
• /
• 2006

Competition will usually develop between the opposing walls as the restorative resin shrinks during polymerization. Magnitude of this phenomenon may be depended upon cavity configuration and volume. The purpose of this sturdy was to evaluate the effect of cavity configuration and volume on microleakage of composite resin restoration that has margins on the enamel site only. The labial enamel of forty bovine teeth was ground using a model trimmer to expose a flat enamel surface. Four groups with cylindrical cavities were defined, according to volume and configuration factor(Depth x Diameter / C-factor) - Group I : 1.5 mm ${\times}$ 2.0 mm / 4.0, Group II : 1.5 mm ${\times}$ 6.0 mm / 2.0, Group III : 2.Omm ${\times}$ 1.72 mm / 5.62, Group IV : 2.0 mm ${\times}$ 5.23 mm / 2.54. After treating with fifth-generation one-bottle adhesive - BC Plus$^{TM}$ (Vericom, AnYang, Korea), cavities were bulk flted with microhybrid composite resin - Denfill$^{TM}$ (Vericom). Teeth were stored in distilled water for one day at room temperature and were finished and polished with Sof-Lex system. Specimens were thermocycled 500 times between 5$^{\circ}$C and 55$^{\circ}$C for 30 second at each temperature. Teeth were isolated with two layers of nail varnish except the restoration surface and 1 mm surrounding margins. Electrical conductivity (${\mu}$A) was recorded in distilled water by electrochemical method. Microleakage scores were compared and analyzed using two-way ANOVA at 95% level. The results were as follows: 1. Small cavity volume showed lower microleakage score than large one, however, there was no statistically significant difference. 2. There was no relationship between cavity configuration and microleakage. Factors of cavity configuration and volume did not affect on microleakage of resin restorations with enamel margins only.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.399-406
• /
• 2000

The effect of inlay surface treatment on bonding was investigated when resin inlay was bonded to resin-modified glass-ionomer base with resin cement. For the preparation of glass-ionomer base, resin-modified glass-ionomer cement (Fuji II LC, GC Co., Japan) was filled in class I cavities of 7mm in diameter and 2mm in depth made in plastic molds. Eighty eight resin inlay specimens were made with Charisma$^{(R)}$ (Kulzer, Germany) and then randomly assigned to the four different surface treatment conditions: Group I, $50{\mu}m$ aluminium oxide sandblasting and silane treatment ; Group II, silane treatment alone ; Group III, sandblasting alone, and Group IV (control), no surface treatment. After a dentin bonding agent with primer (One-Step$^{TM}$, Bisco Inc., IL., U.S.A.) was applied to bonding surface of resin inlay and base, resin inlay were cemented to glass-ionomer base with a resin cement (Choice$^{TM}$, Bisco Inc., IL., U.S.A.). Shear bond strengths of each specimens were measured using Instron universal testing machine (4202 Instron, lnstron Co., U.S.A.) and fractured surfaces were examined under the stereoscope. Statistical analysis was done with one-way ANOVA and Dunkan's multiple range test. The results were as follows: 1. Sandblasting and silane treatment provided the greatest bond strength(10.56${\pm}$1.95 MPa), and showed a significantly greater bond strength than sandblasting alone or no treatment (p<0.05). 2. Silane treatment provided a significantly greater bond strength(9.77${\pm}$2.04 MPa) than sandblasting alone or no treatment (p<0.05). However, there was no significant difference in bond strength between sandblasting treatment and silane one (p>0.05). 3. Sandblasting alone provided no significant difference in bond strength from no treatment (p>0.05). 4. Stereoscopic examination of fractured surface showed that sandblasting and silane treatment or silane treatment alone had more cohesive failure mode than adhesive failure mode. 5. In relationship between shear bond strength and failure mode, cohesive failure occurred more frequently as bond strength increased.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel, undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesiodistally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference in fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even if that portion consists of mainly enamel and a little dentin structure.

• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.56-63
• /
• 1979

The morphological and anatomical features of petioles in genus Populus were as follows, 1. All of 8 species had one sort of these trichoma; wooly, tomentose, gravellate, cravellate. 2. The colors of petioles were different with the species; Populus alba was green white, P. glandulosa was white green, and P. maximowiezii P. koreana were red on the surface but the back of petioles were light green. Most of petioles of P. euramericana and P. deltoides were light green but the rest on the same trees were two different colors as P. nigra var. italica and P. simonii were light green or yellow green. 3. P. koreana had the largest diameter of petiole among the 8 species investigated, and P. simonii was the smallest. 4. The lengths of petioles were highly significant among species except 3 combinations. 5. The number of vascular was different with the species and with section levels of petiole; At the base level, the vascular number of 8 species were highly significant among species and the average number of vascular of 8 species were 6.61. At the middle level, the average number of vascular were 5.26 in 8 species, and P. nigra var. italica were highly significant against the rest 7 species and two combinations showed at 5 percent significance. 6. At the terminal level, since the 95.5 per cent of the samples contained 3~4 vasculars and only 4.5 per cent of the samples in each section contained 5 vasculars, there, was no significance among the species. 6. Mostly the largest vascular of petioles was appeared in under part of the any sections in 8 species investigated.

• Journal of Korean Society of Forest Science
• /
• v.86 no.4
• /
• pp.443-449
• /
• 1997

We examined the effect of pretreatments on seed germination, seedling growth, optimal seedling density of Phellodendron amurense. The seeds were carefully purified after collection in late Oct. from natural population at Mt. Chiri. For the evaluation of pretreatment effects, seeds were sowed in an experimental nursery after being stored in open ground($2{\sim}8^{\circ}C$) with soaking in 20% $H_2O_2$, 50-fold pon-pon solution, cold moist stratification in refrigerator($2{\sim}4^{\circ}C$) and dry storage in roam temperature($4{\sim}18^{\circ}C$), respectively, For the effect of growth density of seedlings, seedlings germinated in nursery were precisely controlled with 53, 104, 220, 380 seedlings per $m^2$. Among pretreatments for the promotion of germination rate, pon-pon treatment(68.8%) was highest, the others were higher than that in dry storage(2.3%), and these seed pretreatment methods were significantly different at 1% level. The height growth of seedlings showed the most vigor from Jun.12 to Jul. 8, and from Jul.20 to Aug. 2, and it reached to 72.8% of height growth. In case of 1-0 seedling, although seedling density per $m^2$ was increased, seedling growth was decreased. The optimal seedling density was 104 seedlings per $m^2$. The standard seedlings for plantation were above height 55cm, root collar diameter 8.1mm, and root length 21cm. These results demonstrated that seed of P. amurense requires stratification for the germination promotion.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.323-330
• /
• 2010

This study was undertaken to compare early growth characteristics, such as height, diameter at root collar (DRC), and the dry weights of stem, branches, needles and roots between naturally regenerated and planted stands of Pinus densiflora for. erecta in Dae-gi and Bo-gwang site, Gangwon province, Republic of Korea. Average DRC growth was similar between the naturally regenerated and the planted stands in Dae-gi area, however, difference was statistically significant (P<0.01) between the naturally regenerated and the planted stands in Bo-gwang area, 4.66 cm and 2.61 cm, respectively. Average height of the naturally regenerated stands was significantly greater (P<0.01) than that of planted stands in both Dae-gi and Bo-gwang areas. The composition ratio of the dry weights for each part of measured trees was the highest in the stem in the naturally regenerated stands, but in the planted stands, the needle was the highest in both sites. The root/shoot ratio in the Dae-gi and Bo-gwang areas in the planted stands were much greater than those in the naturally regenerated stands, 0.25-0.30 and 0.17-0.18, respectively. The ratio of needle to stem biomass (N/S), branch to stem biomass (B/S), and needle to branch biomass (N/B) was significantly greater in the planted stands than those in the naturally regenerated stands in both sites. The results of this study represent that the regeneration methods, natural and artificial regenerations, can have an influence on the early growth of P densiflora for. erecta. This results not only provide the need for a correct planting method, but also will be useful in studies on the environmental adaptability of trees.

• Geophysics and Geophysical Exploration
• /
• v.9 no.4
• /
• pp.279-290
• /
• 2006

The borehole radar methods used to tunnel detection are mainly classified into borehole radar reflection, directional antenna, crosshole scanning, and radar tomography methods. In this study, we have investigated the feasibility and limitation of each method to tunnel detection through case studies. In the borehole radar reflection data, there were much more clear diffraction signals of the upper wings than lower wings of the hyperbolas reflected from the tunnel, and their upper and lower wings were spreaded out to more than 10m higher and lower traces from the peaks of the hyperbolas. As the ratio of borehole diameter to antenna length increases, the ringing gets stronger on the data due to the increase in the impedance mismatching between antennas and water in the boreholes. It is also found that the reflection signals from the tunnel could be enhanced using the optimal offset distance between transmitter and receiver antennas. Nevertheless, the borehole radar reflection data could not provide directional information of the reflectors in the subsurface. Direction finding antenna system had a advantage to take a three dimensional location of a tunnel with only one borehole survey even though the cost is still very high and it required very high expertise. The data from crosshole scanning could be a good indicator for tunnel detection and it could give more reliable result when the borehole radar reflection survey is carried out together. The images of the subsurface also can be reconstructed using travel time tomography which could provide the physical property of the medium and would be effective for imaging the underground structure such as tunnels. Based on the results described above, we suggest a cost-effective field procedure for detection of a tunnel using borehole radar techniques; borehole radar reflection survey using dipole antenna can firstly be applied to pick up anomalous regions within the borehole, and crosshole scanning or reflection survey using directional antenna can then be applied only to the anomalous regions to detect the tunnel.

• Korean Journal of Plant Resources
• /
• v.33 no.2
• /
• pp.73-79
• /
• 2020

This study was conducted to evaluate the appropriateness cultivation of R. glutinosa by plug seedling. Cultivation by direct seeding (DS) and plug seedling (PS) of R. glutinosa was conducted in each of the Pyeongchang and Eumseong areas. As a result, locally, for the Eumseong area, aerial parts in leaf length, leaf width and number of leaves per plant were better than for the Pyeongchang area. In the cultivation method, leaf width and number of leaves per plant were better with PS cultivation than with DS cultivation. Locally, rhizome yield of underground parts in the Eumseong area was better than that in the Pyeongchang area, but the rhizome yield with DS cultivation in the Eumseong area and PS cultivation in the Pyeongchang area were statistically the same. The fresh rhizome yield for DS in Eumseong, PS in Eumseong, DS in Pyeongchang and PS in Pyeongchang was 1,253 kg/10a, 1,376 kg/10a, 923 kg/10a and 1,256 kg/10a, respectively. Finally, the catalpol content for DS in Eumseong, PS in Eumseong, DS in Pyeongchang and PS in Pyeongchang was 3.67%, 2.03%, 2.96% and 1.60%, respectively. From these results, it can be seen that the R. glutinosa PS cultivation method can increase the rhizome yield.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2002

The study was carried out to determine the growth and biomass production of major deciduous trees including Betula platyphylla var. japonica, Betula schmidtii, Zelkova serrata, Acer mono, Prunes sargentii, and Ligustrum obtusifolium subjected to artificial shade treatment in nursery field. The six deciduous trees seedlings grow for 2 years under different light intensity of 100%, 38-62%, 22-28%, 7-20%, and 2-6% of the full sun light intensity. The results were as follows; In the seedling heights and root collar diameters of shade intolerant species like Betula platyphylla var. japonica and Betula schmidtii, the relative growth rates of seedlings grown in full sun showed 2 times as compared with those subjected to the shade treatment of 2-6% light intensities of full sun. In the shade tolerant species like Acer mono ant Ligustrum obtusifolium, the growth performances were better in the seedlings grown in 38-62% light intensities of full sun. Total dry mass including the dry mass of leaves, shoot and root were as a whole decreased with shade treatment. The ratio of the dry mass of leaves and stem increased the dry mass of root. T/R ratio of the seedlings increased by decreasing the relative light intensity. And the T/R ratio of 2-6% light intensities of full sun was ranged from 1.1~5.0 were greater in the full sun light was ranged from 0.6~3.2. Light intensity by artificial shade treatment decreased in deciduous trees when compared on the whole, it showed tendency that SLA increases, increased that seeing resemblant tendency in LAR and LWR and changed of light intensity is strong, it increased that showed difference as statistical. But, LWR of Betula platyphylla var. japonica increased gradually and showed tendency that decreases rapidly in the shade treatment of 2-6% light intensities of full sun. This result is thought that biomass production decreased by shading treatment influenced in physiological characteristics such as leaf area and decrease of the leaf amount.