• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.225-232
• /
• 1998

Currently NTSC, PAL, and SECOM are widely used for TV broadcasting systems. In Korea, NTSC has been used to reduce transmission bandwidth and broadband flickers using the Interlaced scanning method. Image data in the Interlaced scanning method require De-interlacing compensation for PC-based multimedia applications. The existing compensation algorithms such as ZOI, FOI, and ELA provieds simple computations and effective image compensation while the PSNR is low and horizontal and vertical edges are hardly detected. In this paper, the ADI(Adaptive De-Interlacing) algorithm that can increase PSNR and detect horizontal and vertical edges is proposed and a hardware system is implemented using three ACTEL 1020B FPGA chips. The system consists of the algorithm part implemented using two FPGAs and the memory control part implemented using rest one. Also the system operation is investigated for real time processing.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.10
• /
• pp.1714-1727
• /
• 2015

This work describes a new strategy for optimal design of Multiplex-PCR primer sequences. The process is based on the Particle Swarm Optimization-Simplex algorithm (Mult-PSOS). Diverging from previous solutions centered on heuristic tools, the Mult-PSOS is selfconfigured because it does not require the definition of the algorithm's initial search parameters. The successful performance of this method was validated in vitro using Multiplex-PCR assays. For this validation, seven gene sequences of the most prevalent bacteria implicated in urinary tract infections were taken as DNA targets. The in vitro tests confirmed the good performance of the Mult-PSOS, with respect to infectious disease diagnosis, in the rapid and efficient selection of the optimal oligonucleotide sequences for Multiplex-PCRs. The predicted sequences allowed the adequate amplification of all amplicons in a single step (with the correct amount of DNA template and primers), reducing significantly the need for trial and error experiments. In addition, owing to its independence from the initial selection of the heuristic constants, the Mult-PSOS can be employed by non-expert users in computational techniques or in primer design problems.

• Wind and Structures
• /
• v.14 no.4
• /
• pp.337-357
• /
• 2011

The collection of wind speed time series by means of digital data loggers occurs in many domains, including civil engineering, environmental sciences and wind turbine technology. Since averaging intervals are often significantly larger than typical system time scales, the information lost has to be recovered in order to reconstruct the true dynamics of the system. In the present work we present a simple algorithm capable of generating a real-time wind speed time series from data logger records containing the average, maximum, and minimum values of the wind speed in a fixed interval, as well as the standard deviation. The signal is generated from a generalized random Fourier series. The spectrum can be matched to any desired theoretical or measured frequency distribution. Extreme values are specified through a postprocessing step based on the concept of constrained simulation. Applications of the algorithm to 10-min wind speed records logged at a test site at 60 m height above the ground show that the recorded 10-min values can be reproduced by the simulated time series to a high degree of accuracy.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.476-484
• /
• 2018

The high capacity audio watermarking algorithms are facing a main challenge in satisfying the robustness against attacks especially on de-synchronization attacks. In this paper, a robust and a high capacity algorithm is proposed using segment selection, Stationary Wavelet Transform (SWT) and the Quantization Index Modulation (QIM) techniques along with new synchronization mechanism. The proposed algorithm provides enhanced trade-off between robustness, imperceptibility, and capacity. The achieved watermarking improves the reliability of the available watermarking methods and shows high robustness towards signal processing (manipulating) attacks especially the de-synchronization attacks such as cropping, jittering, and zero inserting attacks. For imperceptibility evaluation, high signal to noise ratio values of above 22 dB has been achieved. Also subjective test with volunteer listeners shows that the proposed method has high imperceptibility with Subjective Difference Grade (SDG) of 4.76. Meanwhile, high rational capacity up to 176.4 bps is also achieved.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.131-145
• /
• 2015

The voltage-source inverters (VSI) supplying a motor drive are prone to open transistor faults. To address this issue in fault-tolerant drives applicable to electric vehicles, a new open transistor fault diagnosis (FD) method is presented in this paper. According to the proposed method, in order to define the FD index, the phase angle of the converter output current is estimated by a simple trigonometric function. The proposed FD method is adaptable, simple, capable of detecting multiple open switch faults and robust to load operational variations. Keeping the FD in mind as a mandatory part of the fault tolerant control algorithm, the FD block is applied to a five-phase converter supplying a multiphase fault-tolerant PM motor drive with non-sinusoidal unbalanced current waveforms. To investigate the performance of the FD technique, the fault-tolerant sliding mode control (SMC) of a five-phase brushless direct current (BLDC) motor is developed in this paper with the embedded FD block. Once the theory is explained, experimental waveforms are obtained from a five-phase BLDC motor to show the effectiveness of the proposed FD method. The FD algorithm is implemented on a field programmable gate array (FPGA).

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.399-413
• /
• 2021

The solution of the time-dependent neutron diffusion equation can be approximated using quasi-static methods that factorise the neutronic flux as the product of a time dependent function times a shape function that depends both on space and time. A generalization of this technique is the updated modal method. This strategy assumes that the neutron flux can be decomposed into a sum of amplitudes multiplied by some shape functions. These functions, known as modes, come from the solution of the eigenvalue problems associated with the static neutron diffusion equation that are being updated along the transient. In previous works, the time step used to update the modes is set to a fixed value and this implies the need of using small time-steps to obtain accurate results and, consequently, a high computational cost. In this work, we propose the use of an adaptive control time-step that reduces automatically the time-step when the algorithm detects large errors and increases this value when it is not necessary to use small steps. Several strategies to compute the modes updating time step are proposed and their performance is tested for different transients in benchmark reactors with rectangular and hexagonal geometry.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.403-406
• /
• 2005

The purpose of this paper is to propose ways to remove false color noise (FCN) generated during de-mosaicing on RGB Bayer pattern images. In case of images sensors adapting Bayer pattern color filters array (CFA), de-mosaicing is conducted to recover the RGB color data in single pixels. Here, FCN phenomena would occur where there is clearer silhouette or contrast of colors. The FCN phenomena found during de-mosaicking process appears locally in the edges inside the image and the proposed method of eliminating this is to convert RGB color space to YCbCr space to conduct smoothing process. Moreover, for edges where different colors come together, censoring based smoothing technique is proposed as a way to minimize color blurring effect.

• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.421-429
• /
• 2014

We consider the problem of scheduling communications in wireless sensor networks (WSNs) to ensure battery preservation through the use of the sleeping mode of sensors.We propose a communication protocol for 1-hop WSNs and extend it to multi-hop WSNs through the use of a 1-hop clustering algorithm.We propose to schedule communications in each cluster in a virtual communication ring so as to avoid collisions. Since clusters are cliques, only one sensor can speak or listen in a cluster at a time, and all sensors need to speak in each of their clusters at least once to realize the communication protocol. We model this situation as a mathematical program.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.46-65
• /
• 2017

This paper proposes a fast patch-based de-blurring algorithm including kernel estimation based on the angle between the edge and the blur direction. For de-blurring, image patches from the most informative edges in the blurry image are used to estimate a kernel with low computational cost. Moreover, the kernels of each patch are estimated based on the correlation between the edge direction and the blur direction. This makes the final kernel more reliable and creates an accurate latent image from the blurry image. The combination of directionally oriented kernel estimation and patch-based de-blurring is faster and more accurate than existing state-of-the art methods. Experimental results using various test images show that the proposed method achieves its objectives: speed and accuracy.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.649-658
• /
• 2008

In this paper, we proposed an adaptive PSO(APSO) algorithm which changes parameter values with every recursion based on the conventional particle swam optimization(CPSO). In order to solve the optimization problem, the proposed APSO algorithm is applied to some functions, such as the De Jong function, Ackley function, Davis function and Griewank function. The superiority of the proposed APSO algorithm compared with the genetic algorithm(GA) is proved through the numerical experiment. Finally we applied the proposed algorithm to developing a function for personal magnetic field exposure based with real datas which are acquired based on the consumer research and field measuring instrument.