• 조명전기설비학회논문지
• /
• 제23권11호
• /
• pp.22-27
• /
• 2009

This paper presents a two-paralleled four quadrant DC chopper type PWM power conversion circuit in order to generate a gradient magnetic field in the Magnetic Resonance Imaging (MRI) system. This circuit has 8-IGBTs at their inputs/outputs to realize further high-power density, high speed current tracking control, and to get a low switching ripple amplitude in a controlled current in the Gradient Coils (GCs). Moreover, the power conversion circuit has to realize quick rise/fall response characteristics in proportion to various target currents in GCs. It is proposed in this paper that a unique control scheme can achieve the above objective DSP-based control system realize a high control facility and accuracy. It is proved that the new control system will greatly enlarge the diagnostic target and improve the image quality of MRI.

• 한국통신학회논문지
• /
• 제13권4호
• /
• pp.277-284
• /
• 1988

X-band 위성통신 전단부의 MMIC's 기초자료 수집을 위하여 주파수 변환기를 12GHz GaAs MESFET저잡음 증폭기와 단일 게이트 GaAs MESET믹서에 칩 캐패시터와 DC 블록을 포함시켜 MIC로 각기 설계하였다. 믹서의 입력회로와 저역통과 여파기는 각기 대칭구조 결합기와 Semi-Lumped 구조로 설계하였다. 실험결과 칩 캐패시터의 경우 RF입력이 11.581-11.981 GHz일때 중간 주파수 581-981MHz에서 변환이득이 20-23dB였으며 DC블럭의 경우 RF입력이 12.1GHz일때 중간 주파수 1GHz에서 변환이득이 25dB였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권1호
• /
• pp.20-23
• /
• 2004

BLDCMs are widely used in many industries. In certain specialized areas, they need to have high efficiency, high power rate and produce a low volume of noise, etc. In this study, a new type of slotless BLDCM is proposed that has no cogging torque, low iron loss and low volume as compared to commonly used BLDCMs. With a high performance magnet and coreless compact winding structure similar to those employed in linear synchronous motors, motor volume is reduced. The proposed motor has been put been through various experiments arid has demonstrated acceptable results for industry applications.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.92-101
• /
• 2006

In this paper a adaptive backstepping control scheme is proposed for control of a do motor driving a one-link manipulator. Fuzzy logic systems are used to approximate the unknown nonlinear function including the parametric uncertainty and disturbance throughout the entire electromechanical system. A compensation controller is also proposed to estimate the bound of approximation error. Thus the asymptotic stability of the closed-loop control system can be obtained. Numerical simulations are included to show the effectiveness of the proposed controller.

• 대한의생명과학회지
• /
• 제15권2호
• /
• pp.119-126
• /
• 2009

This study investigated the effect of Corni Fructus(Cornus officinalis Sieb. et Zucc.) extract on hyperglycemia and renal function in streptozotocin-induced diabetic rats. Male Sprague-Dawley rats were divided into three groups including normal control(NC), diabetic control(DC), and diabetic treatment with Corni Fructus(DCF). Over a 4-week experimental period, Corni Fructus aqueous extract was administered orally at 500 mg/kg BW/day. The final fasting serum glucose, serum urea nitrogen, triglyceride, urinary total protein level, and relative weight of the left kidney in the DCF group were significantly lower than the DC group. Serum insulin level in the DCF group was higher than the DC group by 23%. The renal xanthine oxidase and superoxide dismutase activities in the DCF group were significantly lower than the DC group. The renal catalase activity in the DCF group was significantly higher than the DC group. In conclusion, these results indicated that Corni Fructus can reduce glucose level and prevent or retard the development of diabetic complication via its antioxidative effect and protecting against diabetic renal damage in streptozotocin-induced diabetic rats.

• Transactions on Electrical and Electronic Materials
• /
• 제1권2호
• /
• pp.23-27
• /
• 2000

Indium in oxide(ITO) films have been deposited on PET and glass substrates by DC reactive magnetron sputtering without post-deposition thermal treatment, The high quality for microstructure, electrical and optical properties of the as-deposited ITO films on unheated substrates is dominated by the sputtering parameters, The influence of the working gas pressure, DC power and oxygen partial pressure has been systematically investigated, The lowest DC power, and oxygen partial pressure has been systematically investigated, The lowest resistivity of ITO films deposited on PET substrates was 6$\times$10$^{-4}$ $\Omega$cm. It has been obtained at a working pressure of 3 mTorr and DC power of 30 W. The sheet resistance and optical transmittance of these film were 22 $\Omega$/square and 84% respectively. The best values of figures of merit for the electrical and optical characteristics such as T/ $R_{sh}$ and $T^{10}$ / $R_{sh}$ are approximately 38.1 and 7.95($\times$10$^{-3}$ $\Omega$$^{-1}$ ), respectively.

• 전력전자학회논문지
• /
• 제23권1호
• /
• pp.59-65
• /
• 2018

A new single-stage flyback power converter with PFC for electrolytic capacitor-less LED driver is proposed in this study. This method minimizes the peak-to-average ratio of the LED driving pulsating current by adding the LED driving current near the LED current valley area, as well as the third harmonic component injection into the input current. The reduced peak current value of the LED drive current minimizes the thermal stress of the LED itself, thereby increasing the reliability of the LED, as well as achieving a long lifetime. Simulation and experimental results show the usefulness of the proposed topology.

• 전력전자학회논문지
• /
• 제23권2호
• /
• pp.121-128
• /
• 2018

This work proposes a simple control method of a buck-type active power decoupling circuit that can minimize the ripple values in the dc link voltage. The proposed method utilizes a simplified duty calculation method and an optimal compensation gain tracking algorithm with variable-step approach. Thus, the dc link voltage ripple can be effectively reduced through the proposed method along with rapid response in tracking the optimum compensation gain. Moreover, the proposed method has better dynamic responses in the load fluctuation or abnormal situation. MATLAB/Simulink simulation and hardware-in-the-loop-simulation(HILS)-based experimental results are presented to validate the effectiveness of the proposed control method.

• 한국컴퓨터정보학회논문지
• /
• 제17권2호
• /
• pp.23-29
• /
• 2012

최근에는 태양광 및 연료 전지 등 신재생 에너지의 경우 대부분이 직류에너지원으로 발전하고 있으며 보급을 위해서는 이를 적절히 활용하는 방안이 필요하다. 이 경우 직류 전용 조명 시스템으로의 활용이 주 대안이 될 수 있다. 개발하고자 하는 태양에너지를 이용한 전원공급장치와 관련한 유사 시스템은 주로 태양광 패널을 컨트롤러를 포함한 충전 키트와 배터리를 서로를 각각 연결하여사용하는 형태로 되어 있다. 이것을 본 연구에서는 태양광패널과 일체형으로 연결하여 전기를 효율적으로 충전하고, 사용할 수 있도록 단일 형태의 독립된 전원공급장치를 구성한다. 이와 함께 직류 전원을 사용한 전자식 안정기 모듈을 램프와 분리되도록 일체형 전자식 안정기의 삼파장 DC 램프 모듈을 개발한다. 개발한 일체형의 DC 램프 모듈은 ON/OFF 버튼으로 램프의 점등과 소등이 가능하며, 사용하다가 램프나 안정기의 교체 시기가 되었을 경우 부분 교체만으로도 반영구적인 사용이 가능하도록 개발한다.

• NEWSLETTER 전기공업
• /
• 92-3호통권46호
• /
• pp.1-23
• /
• 1992