• Korean Journal of Food Science and Technology
• /
• v.21 no.4
• /
• pp.562-568
• /
• 1989

The essential oils from ripe fruit peel and leaf of Zanthoxylum piperitum DC were extracted by gas co-distillation method and analyzed by gas chromatography/mass spectrometry (GC/ MS) and retention index matching. The experimental results revealed the presence of over 100 volatile components. Major components were 1,8-cineol (25.47%), limonene (11.91%), geranyl acetate (9.01%), myrcene (6.15%) in fruit peel and citronellal (23.11%), 1,8-cineol (18.38%), citronellol (6.04%) in leaf. Among the components identified were the following; in fruit peel, ${\alpha}-pinene$ and 13 hydrocarbons, linalool and 8 alcohols, citronellal and 3 aldehydes, carvone and 2 kotones, methyl salicylate and 7 esters, and 1,8-cineol and oxides, and in leaf, ${\alpha}-pinene$ and 7 hydrocarbons, linalool and 7 alcohols, citronellyl acetate and 5 esters, citronellal and 1 aldehyde, carvone, and 1,8-cineol and 1 oxide.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1429-1435
• /
• 2004

In this work, high performance broadband amplifier MMIC including all the matching and biasing components, and electrostatic discharge (ESD) protection circuit was developed for K/Ka band applications. Therefore, external biasing or matching components were not required for the operation of the MMIC. STO (SrTiO3) capacitors were employed to integrate the DC biasing components on the MMIC, and miniaturized LC parallel ESD protection circuit was integrated on MMIC, which increased ESD breakdown voltage from 10 to 300 V. A pre-matching technique and RC parallel circuit were used for the broadband design of the amplifier MMIC. The amplifier MMIC exhibited good RF performances and good stability in a wide frequency range. The chip size of the MMICs was $1.7{\pm}0.8$ mm2.

• The Korean Journal of Franchise Management
• /
• v.7 no.2
• /
• pp.27-35
• /
• 2016

Purpose - The primary objective of this study is to investigate the impact of employee characteristics on employees' preference towards corporate pension products. This study can provide a guidance for maximization of benefits for employees and their affiliated corporation. Employee characteristics include average length of labour, wage system of annual salary, age, types of interest rates and size of corporation. Existing research generally concentrate on vitalizations of corporate pension product raising an imperfection, improvements, tax benefit analysis and legal consideration. Thus, this study intensively analyses the effect of employee attributes on firms' decision for corporate pension products, such as DB(defined benefit) and DC(defined contribution) type. Research design, data, and methodology - The data were collected using self-administrated questionnaire survey on corporate pension products from CEOs or HR directors 250 foreign-invested companies', purchasing pension plans in practice with domestic financial trustees (insurance companies, banks and security companies). Hypotheses testing was conducted using Logistic Regression analysis with SPSS/PC+ 21.0. Results - The findings of the study are as follows. Employees with the long length of labour are more likely to have DB plan; more likely to prefer DC plan with the dividend distribution product regarding the types of interest rate. SMEs(less than 100 employees) are more likely to select DC plan whereas high fluctuation in wage with annual salary has no impacts. In addition, the ages has no significant effect on the preference. Conclusions - This study has examined with the empirical testing that employees' variable attributes and qualities are one of the vital factors for corporation pension plan selection. Currently, majority employees are highly likely to join DB plan and Defined interest types. Corporation with less than 10 employees prefer IRP scheme while most of corporation are intended to join DC plan. In a very near future, corporation more than 300 employees will be required to purchase mandatory plan under national regulation. For maximization of employees' contentment to corporation pension insurance and for complementing the flaws of existing plans, the future studies shall also research in a perspective of employee benefit.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.1051-1066
• /
• 2018

This study presents a novel step-up switched capacitor multilevel inverter (SCMLI) structure. The proposed structure comprises 2 unequal DC voltage sources, 4 capacitors, and 14 unidirectional power switches. It can synthesize 21 output voltage levels. The important features of the proposed topology are its self-voltage boosting and inherent capacitor voltage balancing capabilities. Furthermore, a cascaded structure of the proposed SCMLI with an asymmetric DC voltage source configuration is presented. The proposed topology and its cascaded structure are compared with conventional and other recently developed topologies in terms of different aspects, such as the required components to produce a specific number of output voltage levels, the total standing voltage (TSV) and peak inverse voltage of the structure, and the maximum number of switches in the conducting path. Furthermore, a cost function is developed to verify the cost-effectiveness of the proposed topology with respect to other topologies. The TSV of the proposed topology is significantly lower than those of other topologies. Moreover, the developed topology is cost-effective compared with other topologies. A detailed operating principle, power loss analysis, and selection procedure for switched capacitors are presented for the proposed SCMLI structure. Extensive simulation and experimental studies of a 21-level inverter structure prove the effectiveness and merits of the proposed SCMLI.

• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.45-57
• /
• 1999

Groundwater flow in rock mass is controlled by the fractures developed in the area. So, the conductive fractures are very important for groundwater flow in crystalline rock. This study aims to find out the characteristics of the fracture distributed in granitic rock in the northern part of the Yusong area (latitude $36^{\circ}24'18"~36^{\circ}25'08",{\;}longitude{\;}127^{\circ}21'00"~127^{\circ}23'23"$). The electric and EM surveys were carried out in the site to delineate the fracture the fracture zones. Since geophysical survey provides non-unique solution, hydraulic data and dilling log data including BHTV scanning were used as complementary data to achieve the objective of this study. Electric survey(DC) arrays used are schlumberger and dipole-dipole arrays. VLF is used for EM survey. The main charcteristics of the fracture developed in the study aera are that fractures associated with basic dyke cut corss the main fracture zone in NNW and play an important role as hydraulic barrier. In trun, groundwater table in the upstream area is lower than that downstream area.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.2
• /
• pp.21-31
• /
• 2017

Purpose - The total amount of advanced Corporate Pension Insurance products exceed 148 trillion Korean Won at the end of 2016. For a firm with over 300 employees, when a bill on compulsion of introduction of Corporate Pension Insurance products, currently pending in court, is passed, Corporate Pension shall be an essential. The findings of the paper will provide a guideline for understanding on firm's attributes and its effects towards introduction of Corporate Pension Insurance products. Research design, data, and methodology - The data were collected using statistics of employer panel survey from Korea Labour Institute in 2013. The study analyses a sample survey on 1,775 outstanding enterprises and their HR department among whole corporations in Korea. For analysis of data, empirical testing by Logistic Regression was utilized. Results - As an outcome of empirical testing, variables on share of regular employees and the aged employees in over 50's generates a significant statistical meaning. It eventually gives a great impact on purchase of Corporate Pension scheme. Moreover, variables on corporate financial statement, current sales, current net income, total amount of the debts, labor cost per person also has a vital influence on introduction of Corporate Pension Insurance products. Lastly, variables on firm's labor relationship have no effect except for the execution or non-execution of HR consulting. Meanwhile, Variables affecting a choice on pension schemes types among firm's attributes are a share of regular employees, current net income, execution or non-execution of HR consulting etc. These variables represents a statistical implication. According to their each features, they prefer DB or DC plan. Conclusions - Introduction of corporate pension scheme is apposite to contemporary Korea's situation entering a hyper-aging society and firms with a high share of regular employees, the weight of aging, current sales, current net income and labor cost per person are exceedingly active in purchasing Corporate Pension Insurance products. However, after the introduction of corporate pension scheme, firms which has an implementation of consultation on human resource management, flexible benefits plan, job security and welfare system prefer DC plan whereas from financial perspective firms with high net income prefer DB plan.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.6
• /
• pp.383-389
• /
• 2001

We report on the design, fabrication, and characterization of 0.35${\mu}{\textrm}{m}$-gate AIGaAs/InGaAs PHEMTs for millimeter-wane applications. The epi-wafer structures were designed using ATLAS for optimum DC and AC characteristics, 0.351m-gate AIGaAs/rnGaAs PHEMTs having different gate widths and number of fingers were fabricated using electron beam lithography Dependence of RF characteristics of PHEMT on gate finger with and number of gate fingers have been investigated. PHEMT haying two 0.35$\times$60${\mu}{\textrm}{m}$$^2$ gate fingers showed the knee voltage, pinch-off voltage, drain saturation current density, and maximum transconductance of 1.2V, -1.5V, 275㎃/mm, and 260.17㎳/mm, respectively. The PHEMT showed fT(equation omitted)(current gain cut-off frequency) of 45㎓ and fmax(maximum oscillation frequency) of 100㎓. S$_{21}$ and MAG of the PHEMT were 3.6dB and 11.15dB, respectively, at 35㎓

• Journal of the Korean Magnetics Society
• /
• v.13 no.5
• /
• pp.216-220
• /
• 2003

In this work, transmission characteristics of read and write signal were calculated when a MRAM (magnetic random access memory) cell is operated up to 10 GHz. Test device having long read and write lines was modeled in 3 dimensions to perform a simulation. The simulation was divided into two parts, read and write operations, and S-parameters were computed utilizing FEM (finite element method) algorithm. Transmission coefficients, S$\sub$21/, for read and write operations of MRAM device which was designed for a single cell test configuration were analyzed from DC to 1 GHz and DC to 10 GHz, respectively. When the insulator thickness between the bit and sense lines was increased from 500 to 1500 ${\AA}$, 3 dB attenuation frequency was increased by 3.3 times, from 135 to 430 MHz. The length of the bit and sense lines were 600 ${\mu}$m. In addition, access time was estimated by calculating the propagation delay utilizing S-parameters.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.21-30
• /
• 2022

This paper describes the design, manufacture, and testing of servos applicable to small tracking radars. First, Chapter 1 describes the necessity of this study. Chapter 2 describes the development of servos applicable to future tracking radars in small missile systems. Chapter 3 describes the design and test results for current control of brushed DC motors, brushless DC motors, and permanent magnet synchronous motors. And Chapter 4 describes the design and test results for speed control of the test wheel. And in Chapter 5, the results of the previous tests are summarized. In this paper, some pictures were intentionally blurred for security reasons, and the control result of test wheel was described, not the test with the developed gimbals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.174-180
• /
• 2020

This paper presents the development of a tacho generator that is applicable to a DC motor for anti-aircraft weapon systems. In general, devices such as tacho generators and resolvers are used as feedback devices for controlling DC motors. A tacho generator with a wide operating temperature range was developed, which has robust characteristics against shock loads and vibrations according to the operational characteristics of anti-aircraft weapon systems. The target specifications were set based on the requirements of the tacho generator currently in operation. A rotor coupled to the shaft of the motor and a stator coupled to the housing of the motor were then designed and manufactured. The inductance was 31.0 mH, the terminal resistance was 147.7 ohms, and the rotational measurement factor was satisfactory under both normal operation and operating conditions after the maximum speed for the standard of 9.500 ± 0.475 V/krpm. In addition, the environmental suitability of the applied equipment was confirmed through the rate of change in unit temperature, and it was found that the temperature characteristics were all within 0.03 %/℃.