• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.641-644
• /
• 2021

Wearable devices and IoT are being utilized in various fields, where all systems are developing in the direction of multi-functionality, low power consumption, and high speed. In this paper, we propose a DC -DC Step-down C onverter for IoT smart devices. The proposed DC -DC Step-down converter is composed of a control block of the power supply stage. It also consists of an overheat protection circuit, under-voltage protection circuit, an overvoltage protection circuit, a soft start circuit, a reference voltage circuit, a lamp generator, an error amplifier, and a hysteresis comparator. The proposed DC-DC converter was designed and fabricated using a Magnachip / Hynix 180nm CMOS process, 1-poly 6-metal, the measured results showed a good match with the simulation results.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.63-68
• /
• 2009

The power management integrated circuit(PMIC) for CCD image sensor is presented in this study. A CCD image sensor is very sensitive against temperature. The temperature, that is heat, is generally generated by the PMIC with low efficiency. Since the generated heat influences performance of CCD image sensor, it should be minimized by using a PMIC which has a high efficiency. In order to develop the PMIC with high efficiency, the input stage is designed with synchronous type step down DC-DC converter. The operating range of the converter is from 5V to 15V and the converter is controlled using PWM method. The PWM control circuit consists of a saw-tooth generator, a band-gap reference circuit, an error amplifier and a comparator circuit. The saw-tooth generator is designed with 1.2MHz oscillation frequency. The comparator is designed with the two stages OP Amp. And the error amplifier has 40dB DC gain and $77^{\circ}$ phase margin. The output of the step down converter is connected to input stage of the charge pump. The output of the charge pump is connected to input of the LDO which is the output stage of the PMIC. Finally, the PMIC, based on the PWM control circuit and the charge pump and the LDO, has output voltage of 15V, -7.5V, 3.3V and 5V. The PMIC is designed with a 0.35um process.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.40-47
• /
• 2014

An average current mode control scheme that consistently offers good dynamic performance for LLC series resonant DC-to-DC converters irrespective of the changes in the operational conditions is presented in this paper. The proposed control scheme employs current feedback from the resonant tank circuit through an integrator-type compensation amplifier to improve the dynamic performance and enhance the noise immunity and reliability of the feedback controller. Design guidelines are provided for both current feedback and voltage feedback compensation. The performance of the new control scheme is demonstrated through an experimental 150 W converter operating with 340 V to 390 V input voltage to provide a 24 V output voltage.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.295-299
• /
• 2007

Biped robot requires that an energy source and a control part should be installed on the body to realize active system. So, we choose the DC motor having high torque in compact size in this study. In the DC motor serve system, we choose power amplifier with analog configuration, developed the module combined the controller and the driver. We applied this module to robot actuator and studied the response characteristics in an action and a return. Main controller with serve system, loading PIC micro controller, can be load on the robot with light weight.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.119-120
• /
• 2012

본 논문에서는 수중음향 센서를 위한 전력증폭기용 전원회로로 멀티레벨 가변전압출력 AC-DC 컨버터를 제안한다. 제안하는 가변전압출력 AC-DC 컨버터는 입력단측의 입출력측 절연 및 멀티전원전압을 얻기 위한 고효율 위상제어 풀 브리지 DC-DC컨버터와 출력단측의 응답특성이 빠른 멀티레벨 가변출력전압을 얻기 위한 2개 Flying capacitor 3-level converter와 1개의 다이오드 브리지로 구성되어 있다. 본 논문에서 제안하는 멀티레벨 컨버터는 수중음향 센서를 위한 전력증폭기용 전원회로로서 유용하게 사용될 것으로 예상한다.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.369-372
• /
• 2002

This paper presents a family of continuous conduction mode with constant-switching pulse width modulator controllers. Unified implementation of quasi steady state approach for various DC-DC converters topoiogies is illustrated. The property and control low for quasi-state approach will be discussed in this paper. The different procedures will be discussed in details with different results for five commonly used DC-DC converters. Both trailing and leading edge pulse width modulation are used. Leading edge modulation can some times lead to simpler control circuitry as will be demonstrated in some circuits. These controllers do not require the multiplier in the voltage feed back loop, error amplifier in the current loop and rectified line voltage sensor, which are needed by traditional control methods. Controller examples and design arc analyzed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.327-334
• /
• 2000

In this paper, the circuit model using circuit averaging method for full bridge for full bridge converter is suggested. This model can represent the physical characteristics of converter circuits appropriately. At most of high capacity DC-DC converter application parts, full bridge converter is adapted for main circuit of power supply. Design and analysis of full bridge converter is no trouble with circuit model. The validity of circuit model is verified through computer simulation and practical welding experiment of welding machine with full bridge converted model.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.149-150
• /
• 2015

압전 마이크로머신 초음파 트랜스듀서(Piezoelectric micro-machined ultrasonic transducers)는 DC 바이어스 전압을 인가해야 구동되는 특성을 가지고 있다. 따라서 초음파 트랜스 듀서를 구동하기 위한 전력증폭기는 DC 바이어스 전압이 요구되므로 기존의 전력증폭기에 비해 효율이 매우 낮아지게 된다. 이를 해결하기 위해 본 논문에서는 압전 마이크로머신 초음파 트랜스듀서를 구동하기 위한 고효율 전력증폭기를 제안한다. 전력증폭기는 AMP부와 전원부로 나뉘며, AMP부는 Class B Amp를 사용하여 높은 증폭 선형성을 갖는다. 전원부는 Amp를 구동하기위한 DC-DC converter가 에너지 회수 동작을 하므로 전력증폭기의 효율을 높일 수 있다. 본 연구에서는 압전 마이크로머신 초음파 트랜스듀서를 구동하기 위한 전력증폭기 회로를 제시하고 시뮬레이션과 실험을 통해 동작 특성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.142-144
• /
• 2019

Nowadays, multi-MHz wireless power transfer (WPT) system has received a great concern of study due to its desirable characteristics such as user convenience, system compact and better safety as compared to the conventional DC-DC with cord. This paper presents a solution for WPT Lithium Batteries charger with Constant Current (CC) and Constant Voltage (CV) charging process. The proposed system consists of a high frequency class D power amplifier, a pair of PCB coil, transformable high-order resonant network and a full-bridge rectifier. The charger can be implemented CC /CV charging profile thanks to automatic reconfigurable resonant compensator. Therefore, the battery can be fully charged without the help of an additional DC/DC converter. The simulation and 50W-6.78-MHz hardware experimental results are presented to verify the feasibility of the proposed method and to evaluate the performance of the proposed wireless battery charger.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.393-396
• /
• 2018

Herein, a 94-GHz low-noise amplifier (LNA) using the 65-nm CMOS process is presented. The LNA is composed of a four-stage differential common-source amplifier and impedance matching is accomplished with transformers. The fabricated LNA chip shows a peak gain of 25 dB at 94 GHz and has a 3-dB bandwidth at 5.5 GHz. The chip consumes 46 mW of DC power from a 1.2-V supply, and the total chip area, including the pads, is $0.3mm^2$.