• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.220-229
• /
• 2017

In this paper, To take advantage a variety of DC power as the boost DC-DC converter design specifications through the inductor L and capacitor C through PSPICE to calculate the best estimate of the value. Boost DC-DC converter with a switch device using IRF840 and reverse recovery time Schottky diodes with excellent with constant current controller using D10SC6M and resistance can be configured to considering the Power LED Module was driven by the production. Converter's switching frequency is 50 kHz, the first Duty Rate was made to increase gradually depending on the value of the detection were, 10 % in the output voltage. As a result, the simulated Boost Power LED driver characteristics is in comparison with the design specifications, 5% or less as the error was approximated. Finally, when input 15 V were offered, a stable output 24 V were obtained. and Dimming Control through the adjustment of brightness and current consumption were possible.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.9
• /
• pp.15-22
• /
• 2013

A new LED lamp driving technology with a charge pump instead of a conventional DC-DC converter is proposed. The proposed driving technology is used to control the LED lamp with digital dimming. The power loss in the zener diodes is reduced because the charging process of the capacitors is selectively controlled according to the digital control signal. From the experimental results, when dimming four LED lamps simultaneously, the average driving circuit efficiency of 89% is obtained, regardless of the dimming level. White light with color temperature over a range of 2800~7200K was produced by dimming control of red, green, blue and amber LED lamps with the proposed driving circuit. The characteristics of the driving circuits can be changed depending on the characteristics of the R, G, B, and A LED lamps. The efficiency of the driving circuits up to a maximum 89% can also be obtained depending on the combination of LED lamps. The driving technology with digital dimming control for LED lamps proposed in this paper would be effective for obtaining high efficiency in LED driving circuits and remote control of LED lamps using digital communications.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.313-317
• /
• 2004

This paper shows the structure of a control System for Fluorescent fin Dimming Ballasts. The control system is composed of phase angle controller, a transducer, many dimmable ballasts. For the implementation of the control system, We made a controller and the transducer that transform the phase angle controlled signal into the DC level. we used the conventional dimmable ballast In this ballast, dimming control is achieved by varying the switching frequency that is controlled by the external DC level. This has non-linear illumination characteristics as the dimming control. Therefore we compensate characteristics using the transducer proposed in this paper. We measured the illumination of two FL-28 lamps with dimming controller.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.834-838
• /
• 2004

This paper presents the structure of a dimming control system for multiple fluorescent lamps. The dimming control system is composed of a phase angle controller, a transducer, and dimmable ballasts. In these ballasts, dimming control is achieved by varying the switching frequency that is controlled by the external DC level.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1492-1495
• /
• 2005

This paper presents a study on the modeling on the dimming control of electronic fluorescent lamp. The resulted models of the lamps were applied the two dimming control methods, one is the variable switching frequence and the other is the variable dc link voltage method. And the comparison of the dimming characteristics between the two methods was presented. Theoretical predictions were verified the experimental results on a 100w electrodeless fluorescent lamp.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.541-543
• /
• 2008

현재 폭넓은 시장을 형성하고 있는 LED는 전 세계적으로 이슈화 되고 있는 친환경 조명기기로 각광받고 있으며, 향후 조명 산업의 50% 이상 시장 점유율을 차지할 것으로 예상된다. 본 논문에서는 Analog Dimming을 이용하여 Single-stage LED 구동 회로를 제안한다. 제안된 회로는 기존 방식과 달리 DC/DC단이 없으므로 가격 경쟁력 및 높은 전력 변환 효율을 확보할 수 있고, 고조파 규제 만족을 위한 역률 보정 기능이 있으며 휘도를 선형적으로 제어할 수 있는 Analog Dimming 기능을 가지고 있다. 최종적으로 제안된 Single-stage LED 구동 회로의 동작 및 Analog Dimming 제어 기법을 소개하고, 시뮬레이션 및 40W급 시작품을 제작, 동작 실험을 통하여 그 타당성을 검증한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.8
• /
• pp.1-7
• /
• 2012

In this paper, a new LED driving circuit which is able to control dimming of LED is proposed using charge pump. The proposed LED driving circuit steps down the input voltage to operate LED without DC-DC converter. The operation of this driving circuit is verified by P-Spice simulation, and the characteristics of the driving circuit is measured and evaluated in the experiments. As a result, the driving circuit efficiency of 88.5[%] is obtained when all LEDs are turned on by digital control method at the highest dimming level(255/255).

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.890-891
• /
• 2008

본 논문에서는 37인치 LCD TV의 패널 전원 공급용 회로로 사용되는 120W급 LLC 공진형 컨버터의 정상 상태 해석을 하였다. 특히, 종래와 달리 TV의 소비 전력 절감을 위해 넓은 범위로 동작하는 램프의 PWM Dimming 기능 동작시의 넓은 동작 영역에서의 공진형 컨버터의 정상 상태 해석을 하였다. TV SET의 동작 중 발생할 수 있는 공진형 컨버터 회로의 전단 회로인 Power Factor Correction 회로의 전압 변동과 또한 넓은 범위로 동작하는 램프의 PWM Dimming 기능 동작시의 부하 변동을 고려하여 LLC 공진형 컨버터의 정상 상태 해석을 하였다. 넓은 범위의 입출력 조건에서도 안정적으로 동작하는 컨버터 회로에 대한 이론적 분석과 실험을 통해 적용된 회로의 신뢰성과 우수성을 확인할 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.304-305
• /
• 2018

현재 공장 단지 내에 구비된 조명 시설은 SMPS, DC/DC컨버터 및 LED 램프 등이 하나의 모듈로써 구성되어 있다. 이처럼 일체형으로써 사고 및 고장 발생 시, 모듈 전체를 수리 또는 교체되어야 하므로 시간과 경제적으로 많은 불편이 따른다. 본 논문에서 제안하는 시스템은 각각을 분리한 집중형 LED 드라이버로써 정류기와 DC/DC 컨버터를 분리하여 구성하였다. 각각의 LED의 Dimming 제어를 위해서, 전력선에 주파수 성분을 첨가하여 주파수 정보에 따른 Dimming 제어를 실시함으로써, 따로 통신선 구비가 필요 없는 집중형 LED 구동 드라이버를 제안하였다. 제안하는 방식의 타당성을 검증하기 위해 PSIM 시뮬레이션을 통하여 그 과정을 증명하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.11
• /
• pp.553-560
• /
• 2005

This paper presents a study on the dimming control of electrodeless fluorescent lamp. To do this the equivalent model of electrodeless fluorescent lamp (ENDURA 100w Type) was first established. The resulted model of the lamp was applied to the two kinds of dimming control method, one is the variable switching frequency method and the other is the variable dc link voltage method. And the comparison results of the dimming characteristics between the two methods was presented. Theoretical predictions were verified by the experimental results on the ENDURA 100W type electrodeless fluorescent lame.