• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.2
• /
• pp.205-213
• /
• 2002

This paper deals with the implementation of three-phase VSI systems which can control the power regenerated from DC bus line to AC supply. The overall system consists of the line-to-line voltage and line current sensors, an actual power calculator using d-q transformation method, a complex power controller with PI control scheme, a gating signal generator for modified ｑ-conduction mode, a DPLL for frequency followup, and Power circuits. Control board is constructed by using a 32-bit DSP TMS32C32, two EFLDs , six ADCs, and a DAC. To verify the performance of the proposed system, we designed and constructed the propotype with the power rating of 5kVA at AC 220V. Experimental results show that the regenerated active power is well controlled to its command vague and the regenerated reactive power still remained at nearly zero through all operating modes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.8
• /
• pp.48-56
• /
• 2009

This paper presents the power conversion system for TIG-welder using the fuel cell stack Generally, power supply for TIG-welder uses the front-ended diode bridge rectifier by common AC power source. In this case, power supply of TIG-welder increases in volume because of using bulky capacitor and diode-rectifier. Also, input current includes ripple and harmonics. Moreover, TIG-welder will be demand the power supply with lightweight and easy movement in the areas like as the islands and mountainous areas or the special environment are not use common AC power source. Thus, input power of the power conversion system for TIG-welder is used PEMFC(Polymer Electrolyte Membrane Fuel Cell), and the power conversion system is comprised of full-bridge converter with function of boost converter and inverter welding source, in this paper. The proposed power conversion system which is power supply for TIG-welder was verified by computer simulations and experiments.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.130-132
• /
• 2008

In this paper, we have proposed a novel zero-voltage-switching (ZVS) soft-switching H-bridge inverter. Because the conventional H-Bridge inverter generates switching losses at turn on and off, the efficiency is reduced. The proposed inverter operates ZVS switching using an auxiliary switch and resonant circuit to improve the efficiency. in the DC-DC converter stage, it can reduce not only switching loss but also capacity and size of passive devices due to the resonant elements. DC-AC inverter stage supplies load with energy through the ZVS operation of 4 switches. A detail mode analysis of operating is in presented. We have presented the inverter topology, principle of operation and simulation results obtained from the PSIM simulator.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.318-320
• /
• 1996

This paper describes a new dc/ac inverter system, which makes use of parallel loaded high frequency resonant inverter consisting of full bridge, for achieving sinusoidal ac waveform. Because current throughout switch at turn-on is always zero in proposed inverter, low stress and low switching loss is achieved. Operating characteristic of proposed system is analyzed in per unit system using computer simulation. Output voltage of it include low harmonics and almost close tn sine wave.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.1
• /
• pp.38-44
• /
• 2015

This paper presents the sensorless drive method for mono inverter dual parallel (MIDP) surface mounted permanent magnet synchronous motor (SPMSM) drive system. MIDP motor drive system is a technique that can reduce the cost of the multi motor driving system. To maximize this merit of the MIDP motor drive system, the sensorless technique is essential to eliminate the position sensors. This paper adopts an appropriate sensorless method for MIDP SPMSM drive system, which uses the reduced order observer and phase locked loop (PLL) to reduce the calculation burden. The I-F control method is implemented for start-up and low speed operation. The validity and performance of the proposed algorithm are shown via experiments with 600-W SPMSMs.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.392-393
• /
• 2017

본 연구에서는 에너지 저장시스템인 ESS 에너지 분배에 관한 시스템을 설계 및 제작하고 성능을 평가하였다. ESS에 충전하는 방법은 현재 기존의 상용전원을 전지에 충전하는 방식과(연계형) 태양광 에너지를 이용한 방법(독립형)으로 나누어져 있다. 본 연구에서는 어느 한쪽을 선택해야하는 번거로움을 줄여 상용전원과 태양광을 동시에 충전할 수 있는 시스템으로 설계하였다. 이러한 방법은 날씨 및 기타 외부적 환경이 좋지 않을 경우 일반 상용전원(AC 220V)를 이용하며 외부적 환경이 좋을 때는 태양전지로 충전이 가능하도록 연계형과 독립형이 동시에 가능하도록 구성하였다. 또한 출력에서 기존의 AC 220V 출력뿐만 아니라 DC12V, 24V의 전압과 USB(5V)도 동시에 출력이 가능하게 설계하므로 필요한 전압을 외부의 인버터나 컨버터가 필요 없이 바로 사용할 수 있도록 배분하였다. 따라서 본 연구에서는 ESS의 전력을 효율적으로 배분하므로 효율성을 증가시키고 내부의 배터리를 보호하는 시스템을 구성하여 그 성능평가를 실시하였으며 실험결과 효율적으로 배분된 전력을 얻을 수 있음을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.159-160
• /
• 2012

For renewable energy has been studied by many research. among them, non-pollution and infinite solar energy using solar power system is newly spotlighed. the DC output characteristic of the solar cell, connection to grid and using the inverter is essential to the process of converter DC to AC. in this paper, study the corresponding changes in the efficiency of the inverter and arcing occurs in the inverter, depending on the conditions and regulations in the UL-1699 series arc occurs.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.42-45
• /
• 1997

A synchronous solid-state var compensator(SSVC) system which employs a three-phase neutral-point-darned (NPC) inverter is presented and analyzed for high voltage and high power applications. The proposed SSVC system can compensate for leading and lagging displacement factor. An optimal pulse-width-modulation (PWM) is used as a means of reducing the size of reactive components. A equivalent model is obtained using DQ-transform, and the characteristic of open-loop system are archived from DC and AC analyzes. A $\alpha$ phase-shift control is suggested using a self-controlled dc bus.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.9-14
• /
• 2007

In this article, the organic integrated circuits such as inverter, ring oscillator, NAND and NOR gates, and rectifier have been fabricated on PEN substrate by using pentacene TFTs, The OTFTs used bottom contact structure and produced the average mobility of 0.26 $cm^2/V.sec$ and on/off current ratio of $10^5$. All circuits successfully worked as the simulation results. Especially, the rectifier was able to operate up to 1 MHz input AC signals, and ring oscillator exhibited oscillation frequency of 1MHz at 40 V. Based on the results of organic integrated circuits we could confirm the possibility of the low cost RFID tags and flexible display with OTFTs.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.4
• /
• pp.369-372
• /
• 2017

This paper presents a control scheme for three-level NPC inverters using small DC-link capacitors. To reduce the inverter system volume, the film capacitor with small capacitance is a promising candidate for the DC-link. When small capacitors are applied in a three level inverter, however, the AC ripple component increases in the DC-link NPV (neutral point voltage). In addition, the three-phase input grid currents are distorted when the DC-link capacitors are fed by diode rectifier. In this paper, the additional circuit is applied to compensate for small capacitor systems defect, and the offset voltage injection method is presented for the stabilization in NPV. These two proposed processes evidently ensure the quality improvement of the input grid currents and output load currents. The feasibility of the proposed method is verified by experimental results.