• 전기학회논문지
• /
• 제63권4호
• /
• pp.476-483
• /
• 2014

This paper describes the operational analysis results of the bipolar DC distribution system coupled with the distributed generators. The energy management for AC/DC power trade and the operational principle of distributed generators and energy storages were first analyzed by computer simulation with PSCAD/EMTDC software. After then a hardware simulator for the bipolar DC distribution system was built, which is composed of the grid-tied three-level inverter, battery storage, super-capacitor storage, and the voltage balancer. Various experiments with the hardware simulator were carried out to verify the operation of bipolar DC distribution system. The developed simulator has an upper-level controller which operates in connection with the controllers for each distributed generator and the battery energy storage based on CAN communication. The developed hardware simulator are possible to use in designing the bipolar DC distribution system and analyzing its performance experimentally.

• 조명전기설비학회논문지
• /
• 제28권6호
• /
• pp.113-121
• /
• 2014

At the end of the 19th century, a battle known as the War of the Currents was fought over how electricity would be generated, delivered, and utilized. In this day and age, there has been a growing interest in Green Growth policies as countermeasures against global warming. As a result of these policies, the use of new and renewable energy needed a power converter to replace fossil fuels has expanded. To reduce power consumption through high efficiency of conversion, Low Voltage DC (LVDC) distribution systems are suggested as an alternative. In a DC distribution system, DC loads are very efficient due to decrease the stages of power conversion. If the LVDC distribution system is adopted, not only DC load but also existing AC loads should be connected with LVDC system. Thus, the modeling of two loads is needed to analyze the DC distribution system. This paper, especially, is focused on the modeling of resistive load and electronic load including power electronic converters using ElectroMagnetic Transient Program (EMTP) software.

• 조명전기설비학회논문지
• /
• 제22권8호
• /
• pp.38-44
• /
• 2008

급격한 IT 산업 발전의 산물인 인터넷데이터센터(IDC)는 서버 시스템이 집적된 고밀도 디지털 부하로 구성되는 특징을 가지고 있다. IDC의 디지털 부하 특성을 고려하여 직류배전시스템을 도입하는 경우 전력 변환 체계의 단순화로 효율 향상의 가능성이 일부 제기되어 왔으나, 국내 IDC 환경에서의 효율성이 검증된 사례는 없었다. 본 논문에서는 교류배전방식을 적용한 KT 분당 IDC와 직류배전방식을 적용한 KT 남수원 IDC의 전력 효율을 비교 분석함으로써 국내 IDC 배전체계의 직류화에 따른 효율 개선 효과를 제시하였다. DC 48[V]를 배전하였을 때 직류배전 방식의 효율이 13.2[%] 높은 것으로 도출되었으며, DC 380[V]의 공급을 가정하였을 때에는 25[%] 이상의 효율 향상을 기대할 수 있었다.

• 전력전자학회논문지
• /
• 제18권5호
• /
• pp.413-421
• /
• 2013

This paper proposes residential hybrid distribution system that can supply AC power and DC power to AC load and DC load at the same time. This hybrid distribution system consists of three parts: bidirectional inverter, step-up converter and step-down converter. Also that is used to supply voltage to home application is classified of AC load and DC load as load characteristics. The performance of proposed hybrid distribution system is validated through the hardware implementation and the experimental results.

• 조명전기설비학회논문지
• /
• 제29권5호
• /
• pp.71-79
• /
• 2015

Recently, new Low Voltage DC (LVDC) power distribution systems have been constantly researched as uses of DC in end-user equipment are increased. As in conventional AC distribution system, High Impedance Fault (HIF) which may cause a failure of protective relay can occur in LVDC distribution system as well. It, however, is hard to be detected since change in magnitude of current due to the fault is too small to detect the fault by the protective relay using overcurrent element. In order to solve the problem, this paper presents an algorithm for detecting HIF using accumulated energy in LVDC distribution system. Wavelet Singular Value Decomposition (WSVD) is used to extract abnormal high frequency components from fault current and accumulated energy of high frequency components is considered as the element to detect the fault. LVDC distribution system including AC/DC and DC/DC converter is modeled to verify the proposed algorithm using ElectroMagnetic Transient Program (EMTP) software. Simulation results considering various conditions show that the proposed algorithm can be utilized to effectively detect HIF.

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.503-510
• /
• 2020

The importance of DC breakers as key protection equipment is increasing in accordance with growing concerns on MVDC distribution network systems without DC/AC conversion. Different from the situation in AC systems, no natural zero-crossing point exists in DC systems. Thus, DC breaker technology is more difficult than AC breaker technology. The solutions for DC breakers can be divided into three types: mechanical, power electronics, and hybrid. In this study, the operating principles of several topologies of hybrid circuit breakers and that of the proposed DC breaker are analyzed and simulated by sorting two types. The breakers are compared in terms of the type and number of semiconductors, volume, power loss, auxiliary components, isolation, and other aspects. The advantages and disadvantages of the breakers are also analyzed.

• 조명전기설비학회논문지
• /
• 제29권2호
• /
• pp.75-81
• /
• 2015

At the end of the 19th century, Edison's DC power system and Tesla's AC power system was debated in power market. Finally, AC system became the primary system of the power market because both step-up and step-down of voltage by using transformer and long-distance power transmission are easily possible. However, nowadays the power market takes some action for introducing DC system. Both domestic and foreign researchers are conducting the study on the DC system as well. Some researchers have conducted the studies on power quality and economic evaluation of the DC distribution system but DC distribution system is still controversial in terms of the effectiveness and reliability. In this paper, we calculate the reliability indices of the Low Voltage Direct Current(LVDC) distribution system considering arrangement of power electronics, layout of the distribution system, and distance between load points.

• 전기학회논문지
• /
• 제65권6호
• /
• pp.911-917
• /
• 2016

DC-based power system is paid attention as interests in energy efficiency and power quality are increased. However, standardization and researches for commercializing Low Voltage DC(LVDC) distribution system are still insufficient. Protection system, which is closely related with reliability, power quality, safety, and life expectancy of components in power system, is also included. This paper therefore analyzes fault response characteristics in LVDC distribution system as a preliminary study on protection schemes. A stepwise analysis on fault current from both AC/DC converter and DC/DC converter is performed and related expressions are derived. And then, modeling and simulation with various conditions are conducted by using ElectroMagnetic Transients Program (EMTP) to verify analysis results. Based on research results in the paper, direction for development of protection schemes for LVDC distribution system is suggested.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1212-1220
• /
• 2013

In general, for a large power system like DC distribution system for buildings, several power converters are modularized for parallel operation. However, in parallel operation, inconsistency of parameters in each module causes circulating current in the whole system. Circulating current is directly related to loss, and, therefore, it is most important for the safety of the power system to supply the suitable current to each module. This paper proposes a control method to reduce circulating current caused during parallel operation. Accordingly, the validity of parallel operation system including response characteristics and normal state was verified by simulation and experiment result.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.754-758
• /
• 2018

전력계통에서 해석 하는 방법종류로 정적해석과 동적해석 그리고 온라인 해석과 오프라인 해석으로 나뉜다. 기존의 계통 해석하는 방법으로는 오프라인 정적해석을 이용하며 PSS/E에서도 정적해석을 주로 사용한다. 하지만 우리가 사용하고 있는 실제 계통에서는 실시간으로 값이 변한다. 정확한 해석을 하기 위해 실시간으로 해석이 가능한 온라인 해석과 동적해석이 요구되며 이에 따라 EMS(Energy Management System)에 대한 중요도가 높아지고 있다. 본 논문에서는 다양한 EMS시스템 중에서도 실시간으로 취득 점으로부터 데이터를 받아와 해석 할 수 있는 정적 온라인 해석인 상태추정을 다룰 것이다. 오늘날 DC부하, DC배전망, 신재생에너지 등 다양한 분야에서 DC계통이 확산되고 있다. 이처럼 DC계통에 많은 관심과 이목이 집중되고 있다. 본 논문에서는 DC계통에 접목시킬 수 있는 상태추정에 대한 해석과 사례연구를 통한 사용가능성에 대해 연구하였다.