• Bulletin of the Korean Chemical Society
• /
• 제22권8호
• /
• pp.807-815
• /
• 2001

Two-dimensional (2D) correlation method, which generates the synchronous and the asynchronous 2D spectrum by complex cross correlation of the Fourier transformed spectra, is an analysis method for the changes of the sample spectrum induced by vari ous perturbations. In the present work, the 2D electronic correlation spectra have been simulated for the cases where the sample spectrum composed of two gaussian bands changes linearly. When only the band amplitudes of the sample spectrum change, the synchronous spectrum shows strong peaks at the band centers of the sample spectrum, but the asynchronous spectrum does not make peaks. When the sample spectrum shifts without changing intensity and width, the synchronous spectrum shows peaks around the initial and final positions of the band maximum and the asynchronous spectrum shows long peaks spanning the shifting range. The band width change produces the complex 2D correlation spectra. When the sample spectrum shifts with band broadening, the width change by 50% of full width at half maximum (FWHM) does not give so large an effect on the correlation spectrum as the spectral shift by one half of FWHM of the sample spectrum.

• 한국전자파학회논문지
• /
• 제11권4호
• /
• pp.599-609
• /
• 2000

In this paper, sub-harmonically pumped single balanced resistive mixers are presented . Frequency bandwidth is selected for a Ku-band, which is 11.75-12.25GHz for RF, 5.375∼5.625 GHz for LO, and 1 GHz for IF signals. A rat-race hybrid is designed for the accomplishment of single balanced type. A low pass filter (LPF) with photonic band gap(PBG) structure is used for good conversion loss and unwanted harmonics suppression. Two types of mixers are suggested, which are one with no gate bias for no DC power consumption and the other with the IF amplifier for conversion gain. When a LO signal with the power of 6 dBm at 5.5 GHz is injected, a conversion loss of 12.17dB and a conversion gain of 7.83 dB are obtained for each mixer. For the both mixers , LO to RF isolation of 20 dB and LO to IF isolation of 60dB are obtained. With the RF power of -30dBm to -3dBm, the mixer shows linear characteristics region of IF. this mixer can be applied for Ku-band and other microwave communication systems.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.181-187
• /
• 2019

In this paper, we demonstrated a power amplifier monolithic microwave integrated circuit (MMIC) for X-band radar applications. It utilizes commercial $0.25{\mu}m$ GaN-based high electron mobility transistor (HEMT) technology and delivers more than 20 W of output power. The developed GaN-based power amplifier MMIC has small signal gain of over 22 dB and saturated output power of over 43.3 dBm (21.38 W) in a pulse operation mode with pulse width of $200{\mu}s$ and duty cycle of 4% over the entire band of 9 to 10 GHz. The chip dimensions are $3.5mm{\times}2.3mm$, generating the output power density of $2.71W/mm^2$. Its power added efficiency (PAE) is 42.6-50.7% in the frequency bandwidth from 9 to 10 GHz. The developed GaN-based power amplifier MMIC is expected to be applied in a variety of X-band radar applications.

• 한국인터넷방송통신학회논문지
• /
• 제18권5호
• /
• pp.97-102
• /
• 2018

본 논문에서는 W-대역 소형 레이다용 파형발생부를 설계 및 제작하였다. 제작된 파형발생부는 DDS를 적용하여 CW 및 FMCW 등 시스템에서 요구되는 다양한 파형을 고속으로 정밀하게 생성한다. 시스템 자체 점검으로 거리 지연 및 거리 추적 시험 시 별도의 점검장비 없이 레이다 자체만으로 시험이 가능하도록 LO 경로를 두 개로 설계하여 스위치를 통해 선택 가능하도록 구현하였다. 제안된 파형발생부는 대역폭 125 MHz, 위상잡음 1 kHz 오프셋(offset)에서 -91 dBc/Hz, 불요파 -63.2 dBc가 측정되었다. 본 논문에서 제시한 파형발생부를 이용하여 W-대역 소형 레이다용 송수신모듈에 바로 적용이 가능할 것으로 예상한다.

• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.368-377
• /
• 1999

본 연구에서는 차세대 이동통신인 2 GHz 광대역 CDMA 송신기를 설계, 제작하였다. 변조방식으로는 QPSK방식보다 전력효율이 우수한 등포락선 특성을 갖는 CC-OQPSK 변조기를 ASIC화가 용이한 FPGA 회로로 구현하였다. 송신기를 제작하여 측정한 결과, 이중변환방식의 중간주파수단은 1차 변화주파수 240 MHz에서 우수한 고조파 제거특성과 20dB의 이득을 얻었다. 2단 RF증폭기는 1.9GHz대역에서 17dB의 이득을 가지며 이때의 채널 출력전력은 +21.14dBm이었다. 본 연구에서 제작한 송신기의 전기적 특성은 설계기준으로 설정한 2GHz대을 위한 W-CDMA 송신기의 규격을 만족함을 확인하였다.

• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.16-20
• /
• 2011

In this paper, we designed and implemented an internal multi-band folded monopole antenna for mobile handset. The proposed antenna covers Global System for Mobile Communications (GSM900: 880~960 MHz), Digital Communications System (DCS: 1710~1880 MHz), US-Personal Communications Service (US-PCS: 1850~1990 MHz), Bluetooth(2400~2484 MHz), WiMAX(3400~3600 MHz), and Wireless Local Area Network (WLAN: 5150~5350 MHz, 5725~5875 MHz) band for Voltage Standing Wave Ratio $(VSWR)\;{\le}\; 3$. The measured peak gains of the implemented antenna are -1.78dBi at 920MHz, 2.72dBi at 1795MHz, 2.25dBi at 1920MHz, 2.34dBi at 2442MHz, 2.11 dBi at 3550MHz, and 2.04 dBi at 5250MHz.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.917-924
• /
• 2019

This paper presents a wideband low noise amplifier (LNA) that is suitable for LTE-Advanced and 5G communication standards employing carrier aggregation (CA). The proposed LNA encompasses a common input stage and a dual output second stage with a buffer at each distinct output. This architecture is targeted to operate in both intra-band (contiguous and non-contiguous) and inter-band CA. In the proposed design, the input and second stages employ a gm enhancement with resistive feedback technique to achieve self-biasing, enhanced gain, wide bandwidth as well as reduced noise figure of the proposed LNA. An up/down power controller controls the single input single out (SISO) and single input multiple outputs (SIMO) modes of operation for inter-band and intra-band operations. The proposed LNA is designed with a 45nm CMOS technology. For SISO mode of operation, the LNA operates from 0.52GHz to 4.29GHz with a maximum power gain of 17.77dB, 2.88dB minimum noise figure and input (output) matching performance better than -10dB. For SIMO mode of operation, the proposed LNA operates from 0.52GHz to 4.44GHz with a maximum voltage gain of 18.30dB, a minimum noise figure of 2.82dB with equally good matching performance. An $IIP_3$ value of -6.7dBm is achieved in both SISO and SIMO operations. with a maximum current of 42mA consumed (LNA+buffer in SIMO operation) from a 1.2V supply.

• 한국ITS학회 논문지
• /
• 제12권6호
• /
• pp.37-43
• /
• 2013

본 논문에서는 SIR(Stepped Impedance Resonator) 구조를 이용한 초광대역(UWB:Ultra Wide Band) 개방형 스터브 대역통과 여파기를 제안한다. 제안한 개방형 스터브 대역통과 여파기는 초광대역을 구현하기 위해 스터브 위치에 SIR 구조를 적용하였으며 낮은 삽입손실을 갖는다. 제안된 대역통과 여파기의 대역폭은 중심 주파수 5.8GHz에서 103% 이고, 삽입 및 반사손실은 각각 0.17dB 및 13.1dB이며 전체의 크기는$21.6{\times}17.8mm^2$ 이다.

• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.164-168
• /
• 2016

A dual-band through-the-wall imaging radar receiver for a frequency-modulated continuous-wave radar system was designed and fabricated. The operating frequency bands of the receiver are S-band (2-4 GHz) and X-band (8-12 GHz). If the target is behind a wall, wall-reflected waves are rejected by a reconfigurable $G_m-C$ high-pass filter. The filter is designed using a high-order admittance synthesis method, and consists of transconductor circuits and capacitors. The cutoff frequency of the filter can be tuned by changing the reference current. The receiver system is fabricated on a printed circuit board using commercial devices. Measurements show 44.3 dB gain and 3.7 dB noise figure for the S-band input, and 58 dB gain and 3.02 dB noise figure for the X-band input. The cutoff frequency of the filter can be tuned from 0.7 MHz to 2.4 MHz.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.245-252
• /
• 2018

본 논문에서는 CSRR구조의 대역제거특성을 이용하여 정지위성용 이중대역 원편파안테나를 설계하였다. 정지위성의 송신(1525~1559MHz)과 수신주파수(1626.5~1660.5MHz)사이에 대역저지 특성을 갖기위하여 사각 CSRR (Complementary split ring resonator)을 안테나의 그라운드면에 식각하였으며 패치안테나의 모서리 부분을 절삭하여 원편파 특성을 얻었다. 패치안테나의 공진주파수는 CSRR의 크기와 위치에 의해 달라지며 시뮬레이션과 측정을 통하여 원편파 특성을 확인하였다. 측정결과 송신과 수신 주파수대역에서 약 0.2dB와 1.5dB의 이득을 얻었다.