• Journal of Distribution Science
• /
• v.9 no.1
• /
• pp.29-38
• /
• 2011

Since a distribution market was opened in 1993 after the conclusion of the Uruguay Round (UR), various new businesses emerged in the Korean retail industry, such as convenience shops, supermarkets, specialty stores, non-store marketing methods, and cyber shopping malls, in addition to traditional markets and department stores. Competition among these retail businesses has intensified. According to the National Statistical Office (NSO), the growth rate of the total retail industry has shown a 32% increase in the past 5 years. While department stores, supermarkets, specialty stores, and other non-store retailing venues have shown signs of stagnation at a growth rate of 20-30%, which is similar to the growth rate of the entire retail industry, convenience shops and non-store marketing have shown 60-70% growth over the same period. By comparison, the growth rate of cyber shopping malls has nearly tripled. When applying development aspects of retail businesses through the competition to the retail life cycle, mom-and-pop stores and traditional markets have already entered the decline phase as specialty stores reach their maturity phase and demonstrate their limit of growth. Department stores are now in the latter part of the growth phase, which is still considered to have some growth potential. Big super markets are still in the early part of their growth stage although they were introduced 20 years ago. Meanwhile, retail businesses such as convenience stores, supermarkets, mail order houses, and warehouse stores are entering the middle growth phase and are expected to continue with their quantitative growth. At a time when most retail businesses in Korea are in a state of development or in the full growth stage, what kind of new innovative retailing will appear and develop? Moreover, what growth engine will drive it? This study analyzes the appearance of innovative retailing and its development process by establishing a discussable consumer's choice model through the interlocking mutual behavior of differentiated competitiveness and consumers' choice based on an awareness of this issue. The analysis of the results of this study can be summarized as follows. First, if a new vacuum zone emerges at the retail market level, innovative retailing such as low price/low service or high price/high service will emerge simultaneously. Second, if the number of new businesses in the vacuum zone increases, this will create competitiveness among the businesses, and each retailer will develop raising of level. Third, if a new business that raises the level develops, competition between the new and the existing retailer will occur, and an assimilation process between the existing retailing and the new retailing will be unfolded. Fourth, each retailing will promote distribution innovations in order to break the frontier of the existing distribution technology, and other retailing will follow the innovator. On the basis of an analysis of the abovementioned results, this study presents the following three suggestions. First, responding to the consumer's decision-making process on the attributes of retail shops that promote differentiation in strategies, this study established a consumer's choice model that can be discussed in relation to changes in market share. Second, this study provided an analysis of the emerging and developmental processes of innovative retail businesses using a more precise logical structure on the basis of the consumer's choice model described in this study. Third, the development process of retail businesses discussed in this study presented retailing solutions regarding management aspects on how to compose a strong retail mix that can help retail businesses gain competitive advantages in the market.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.595-602
• /
• 1996

The antimicrobial effects of two disinfectants commonly used in food industry on Listeria monocytogenes ATCC 15313 were studied. The two disinfectants tested were commercial benzalkonium chloride (BAC) and sodium hypochlorite (NaOCl). Their effects were studied on cells suspended in disinfectants (in vitro) and in the sponge model with the disinfectants (in vivo). When cells were exposed to $0\~0.1\%$ BAC and $0\~150\;ppm$ NaOCL for 20 minutes, BAC and NaOCl concentration more than $0.25\%$ and 100 ppm showed the antimicrobial effects respectively. This organism decreased rapidly during the first $0.5\~1$ minute followed by a slower decrease during the rest of the exposure time. Fifteen ml of cell solution $(about\;10^7\;CFU/ml\;in\;the\;TSB)$ was mixed with 15 ml of disinfectants in the sponge $(6.0{\times}4.0{\times}4.0cm)$, BAC and NaOCl concentration more than $0.1\%$ and 300 ppm showed the antimicrobial effects, and at $0.25\%$ and 800 ppm diminished in cell numbers 3-log cycles during the first 20 minutes. In the case of sponge model, 15 ml of cell solution and 15 ml of disinfectants $(0.25\%\;of\;BAC,\;800\;ppm\;of\;NaOCl)$ were suspended in the sponge during 20 minutes, washing with 200 ml of sterilized distilled water, and this sponge was transfered in the 100 ml TBS, and then incubated at various temperature. The cells were increased about 1-log cycle during 24 hrs at $5\~15^{\circ}C$. And the others temperature, the cells growth was in proporation to storage tepmerature and the cells were about $10^9\;CFU/ml$ after $1\~3$ days incubations.

• Journal of KIISE:Software and Applications
• /
• v.37 no.12
• /
• pp.909-918
• /
• 2010

To analyze the national competitiveness of Korea leads to the conclusion that global high-tech enterprises have been playing leading and pulling roles in making Korea in line with advanced countries even though the country is lacking in various natural resources. The characteristics of these companies above are as follows; Firstly, these enterprises continue to accumulate core technologies and know-how with highly competent human resources and well-organized management. Secondly, they are well structured and equipped with information technology infrastructures which are, for example, ERP, SCM, CRM, and PLM. Among them PLM is considered to be the principal core information technology infra in manufacturing industry. The urgent task of manufacturing industry recently is to develop new products to accept various needs of consumers, and to launch the products in time to market, which requires the manufactures to be equipped with product development infra and system to upgrade product fulfillment and mass production system in a short period. The introduction of PLM System is a solution of core strategy as a manufacturer for collaboration, global development, reengineering of manufacturing system, the innovation and efficiency of manufacturing process, and product quality improvement. The purpose of this study is to analyze the success factors of introducing PLM System and its practicing effectiveness. And the results of empirical study are as follows; (1) Technical success factors positively impact system quality and user satisfaction, (2) Organizational success factors positively impact system quality, but does not impact user satisfaction, (3) Environmental success factors positively impact system quality and user satisfaction, (4) System quality positively impacts user satisfaction, (5) User satisfaction positively impacts the effectiveness of implementing PLM systems, but system quality does not impact it.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.1
• /
• pp.184-203
• /
• 2020

The Confucian ruling class of the Joseon Dynasty regarded Buddhist rituals as "dangerous festivals." However, these Buddhist ceremonies facilitated transitions between phases of life from birth till death and strengthened communal unity through their joint practice of the rites. Ritual spaces were decorated with various utensils and objects that transformed them into wondrous arenas. Of these ornaments, Buddhist paintings served as the most effective visual medium for educating the common people. As an example, a painting of the Ten Kings of the Underworld (siwangdo) could be hung as a means to illustrate the Buddhist view of the afterlife, embedded in images not only inside a Buddhist temple hall, but in any space where a Buddhist ritual was being held. Demand for Buddhist paintings rose considerably with their use in ritual spaces. Nectar ritual paintings (gamnodo), including scenes of appeasement rites for the souls of the deceased, emphasized depictions of royal family members and their royal relatives. In Chinese paintings of the water and land ceremony (suryukjae), these figures referred to one of several sacred groups who invited deities to a ritual. However, in Korean paintings of a nectar ritual, the iconography symbolized the patronage of the royal court and underlined the historicity and tradition of nationally conducted water and land ceremonies. This royal patronage implied the social and governmental sanction of Buddhist rituals. By including depictions of royal family members and their royal relatives, Joseon Buddhist paintings highlighted this approval. The Joseon ruling class outwardly feared that Buddhist rituals might undermine observance of Confucian proprieties and lead to a corruption of public morals, since monks and laymen, men and women, and people of all ranks mingled within the ritual spaces. The concern of the ruling class was also closely related to the nature of festivals, which involved deviation from the routines of daily life and violation of taboos. Since visual media such as paintings were considered to hold a special power, some members of the ruling class attempted to exploit this power, while others were apprehensive of the risks they entailed. According to Joseon wangjo sillok (The Annals of the Joseon Dynasty), the Joseon royal court burned Buddhist paintings and ordered the arrest of those who created them, while emphasizing their dangers. It further announced that so many citizens were gathering in Buddhist ritual spaces that the capital city was being left vacant. However, this record also paradoxically suggests that Buddhist rituals were widely considered festivals that people should participate in. Buddhist rituals could not be easily suppressed since they performed important religious functions reflecting the phases of the human life cycle, and had no available Confucian replacements. Their festive nature, unifying communities, expanded significantly at the time. The nectar ritual paintings of the late Joseon period realistically delineated nectar rituals and depicted the troops of traveling actors and performers that began to emerge during the seventeenth century. Such Buddhist rituals for consoling souls who encountered an unfortunate death were held annually and evolved into festivals during which the Joseon people relieved their everyday fatigue and refreshed themselves. The process of adopting Buddhist rituals-regarded as "dangerous festivals" due to political suppression of Buddhism in the Confucian nation-as seasonal customs and communal feasts is well reflected in the changes made in Buddhist paintings.

• KSBB Journal
• /
• v.21 no.4
• /
• pp.248-254
• /
• 2006

Animal cell culture industry has a large market and an exponential growth rate among biological industry field. Chines hamster ovary(CHO) cells are the most widely used cell lines for recombinant protein production. They can avoid infection from polio, herpes, hepatitis B, HIV, measles, adenovirus and etc. Moreover it is easy to transfection recombinant genes and possible to suspension culture. Serum free media is one of the most important factor of protein production. Because serum has problems. Serum is not defined the contents until now, it has a number of proteins, lipids, carbohydrates and unknown molecules that cause of risk involve in infection and high cost of product purification. CHO cell line cultured using serum free media were the basis of a very successful method to produce(glyco-)protein in mammalian cells, which are then used as pharmaceutical products. Also, the low protein content of the developed medium facilitates downstream processing and product purification. But non-adapted CHO cells have a limit of proliferation cultured using serum free media and it takes very long time to adapt non-adapted cells to serum free media. There are a number of causes of a limit of proliferation using serum free media. Absence of growth factors and growth stimulating molecules is a major factor of the reasons. It makes growth signals and moves cell cycle. And increase of cellular stress is another reason. It induces increase of intraceullar ROS concentration. The purpose of this study is about improvement of proliferation capacity of non-adapted CHO cells cultured using serum free media without adaptation process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.87-95
• /
• 2016

This study examined the characteristics of the hourly demand of city gas in Korea and proposed multiple regression models to obtain precise estimates of the hourly demand of city gas. Forecasting the hourly demand of city gas with accuracy is essential in terms of safety and cost. If underestimated, the pipeline pressure needs to be increased sharply to meet the demand, when safety matters. In the opposite case, unnecessary inventory and operation costs are incurred. Data analysis showed that the hourly demand of city gas has a very high autocorrelation and that the 24-hour demand pattern of a day follows the previous 24-hour demand pattern of the same day. That is, there is a weekly cycle pattern. In addition, some conditions that temperature affects the hourly demand level were found. That is, the absolute value of the correlation coefficient between the hourly demand and temperature is about 0.853 on average, while the absolute value of the correlation coefficient on a specific day improves to 0.861 at worst and 0.965 at best. Based on this analysis, this paper proposes a multiple regression model incorporating the hourly demand ahead of 24 hours and the hourly demand ahead of 168 hours, and another multiple regression model with temperature as an additional independent variable. To show the performance of the proposed models, computational experiments were carried out using real data of the domestic city gas demand from 2009 to 2013. The test results showed that the first regression model exhibits a forecasting accuracy of MAPE (Mean Absolute Percentage Error) around 4.5% over the past five years from 2009 to 2013, while the second regression model exhibits 5.13% of MAPE for the same period.

• The Korean Journal of Pharmacology
• /
• v.21 no.2
• /
• pp.128-141
• /
• 1985

To investigate the influence of phenobarbital sodium on the action of morphine and on the diurnal rhythms of both opiate receptor binding and ${\beta}-endorphin$ contents, the amount of specifically bound $(^3H)$-morphine and immunoreactive ${\beta}-endorphin$ were measured in the midbrain of phenobarbital-treated rats at 4h intervals in a day. Rats were housed and adapted to a controlled cycle of either 12 h light-12 h dark or 24 h constant dark. After 3 weeks of adaptation, 0.5 ml of physiological saline or phenobarbital sodium (20mg/kg/day, i.p.) were administered twice a day for 2 weeks. Highly significant diurnal rhythms of opiate receptor binding and ${\beta}-endorphin$ were present in rat midbrain. In control group, the peak of maximum $(^3H)$-morphine binding was observed at 22:00 h, whereas the peak of ${\beta}-endorphin$ content was found at 06:00 h. Even in the absence of time cues these diurnal rhythms persisted, but they were highly modified with respect to the wave form as well as differences in the timing of peak and nadir. In the phenobarbital-treated group, these diurnal rhythms were also modified in shape, phase and amplitude, as well as in timing of peak and nadir. In this group, 24 h mean of opiate receptor binding was significantly decreased, while the 24 h mean level of ${\beta}-endorphin$ content was highly increased. However, Kd values in all experimental groups did not change. This indicates that differences in binding were not due to changes in the affinity, but in the number of binding sites. Statistical analysis of regression line indicates that changes of receptor binding were closely correlated with the changes of ${\beta}-endorphin$ content. These results suggest that phenobarbital may influence the action of morphine by changing the number of opiate receptors and that the modification of diurnal rhythm of opiate receptor by the agent is possibly due to changes of ${\beta}-endorphin$ content.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.11-23
• /
• 2003

A study on the electrolytic dissolution of SUS-304 and Inconel-600 specimen was carried out in neutral salt electrolyte to evaluate the applicability of electrochemical decontamination process for recycle or self disposal with authorization of large amount of metallic wastes contaminated with uranium compounds generated by dismantling a retired uranium conversion plant in Korea. Although the best electrolytic dissolution performance for the specimens was observed in a Na2s04 electrolyte, a NaNO$_3$ neutral salt electrolyte, in which about 30% for SUS-304 and the same for Inconel-600 in the weight loss was shown in comparison with that in a Na$_2$SO$_4$ solution, was selected as an electrolyte for the electrochemical decontamination of metallic wastes with the consideration on the surface of system components contacted with nitric acid and the compatibility with lagoon wastes generated during the facility operation. The effects of current density, electrolytic dissolution time, and concentration of NaNO$_3$ on the electrolytic dissolution of the specimens were investigated. On the basis of the results obtained through the basic inactive experiments, electrochemical decontamination tests using the specimens contaminated with uranium compounds such as UO$_2$, AUC (ammonium uranyl carbonate) and ADU (ammonium diuranate) taken from an uranium conversion facility were performed in 1M NaNO$_3$ solution with the current density or In mA/$\textrm{cm}^2$. it was verified that the electrochemical decontamination of the metallic wastes contaminated uranium compounds was quite successful in a NaNO$_3$ neutral salt electrolyte by reducing $\alpha$ and $\beta$ radioactivities below the level of self disposal within 10 minutes regardless of the type of contaminants and the degree of contamination.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.83-90
• /
• 2020

The Graphite Isotope Ratio Method (GIRM) can verify non-proliferation of nuclear weapon by estimating the total plutonium production in a graphite-moderated reactor. Using the reactor, plutonium is generated and accumulated through the ²³⁸U neutron capture reaction, and impurities in the graphite are converted to nuclides due to the nuclear reaction. Therefore, the amount of plutonium production and concentration of the impurities are correlated. However, the plutonium production cannot be predicted using only the absolute concentration of the impurities. It can only be predicted when the initial concentration of the impurities is obtained because the concentration, at a certain time, depends on it. Nevertheless, the ratios of the isotopes in an element are known regardless of the impurity of an element in the graphite moderator. Thus, the correlation between the isotope ratio and amount of plutonium produced helps predict plutonium production in a graphite-moderated reactor. Boron, Lithium, Chlorine, Titanium, and Uranium are known as indicator elements in the GIRM. To assess whether the correlation between the indicator isotope and amount of plutonium produced is independent of the initial concentration of the impurities, four different impurity compositions of graphite were used. ¹⁰B/¹¹B, ³⁶Cl/³⁵Cl, ⁴⁸Ti/⁴⁹Ti, and ²³⁵U/²³⁸U had a consistent correlation with the cumulative plutonium production, regardless of the initial impurity concentration of the graphite, because these isotopes were not generated through the nuclear reaction of other elements. On the other hand, the correlation between ⁶Li/⁷Li and plutonium production depended on the initial concentration of the impurities in graphite. Although ⁷Li can be produced through the neutron capture reaction of ⁶Li, the (n, α) reaction of ¹⁰B was the major source of ⁷Li. Therefore, the initial concentration of ¹⁰B affected the production of ⁷Li, making Li unsuitable as an indicator element for the GIRM.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.51-62
• /
• 2020

This study was conducted to develop a method for depth assessment of embedded sources using gamma-spectrum ratio and for the evaluation of field applicability. To this end, Peak to Compton and Peak to valley ratio changes were evaluated according to ¹³⁷Cs, ⁶⁰Co, ¹⁵²Eu point source depth using HPGe detector and MCNP simulation. The effects of measurement distance of PTV and PTC methods were evaluated. Using the results, the source depth assessment equation using the PTC and PTV methods was derived based on the detection distance of 50 cm. In addition, the sensitivity of detection distance changes was assessed when using PTV and PTC methods, and error increased by 3 to 4 cm when detection distance decreased by 20 cm based on 50 cm. However, it was confirmed that if the detection distance was increased to 100 cm, the effects of detection distance were small. And PTV and PTC methods were compared with the two distance measurement method which evaluates the depth of source by the change of net peak counting rate according to the detection distance. As a result of source depth assessment, the PTV and PTC showed a maximum error of 1.87 cm and the two distance measurement method showed maximum error of 2.69 cm. The results of the experiment confirmed that the accuracy of the PTV and PTC methods was higher than two distance measurement. In addition, Sensitivity evaluation by horizontal position error of source has maximum error of less than 25.59 cm for the two distance measurement method. On the other hand, PTV and PTC method showed high accuracy with maximum error of less than 8.04 cm. In addition, the PTC method has lowest standard deviation for the same time measurement, which is expected to enable rapid measurement.