• 한국정보통신학회논문지
• /
• 제13권3호
• /
• pp.475-481
• /
• 2009

교착상태의 발생 주기 및 확률은 교착상태를 다루는 알고리즘 설계 시 많은 영향을 미친다. 그러나 프로세스나 자원의 성격, 자원 요구나 반환 연산 방식, 프로세스 개수 등의 성질이 교착상태 발생에 어떻게 영향을 미치는지 분석하는 게 쉽지 않아 이 분야에 대한 연구가 매우 부족하다. 이 논문은 자원 할당 상태를 (a,b)t로 표현하는 상태 모델을 이용하여 상태의 개수를 획기적으로 감소시켰다. 또한 시스템 분석에 있어서 자원의 오류 발생 비율과 복구 비율이 미치는 영향도 함께 포함할 수 있도록 설계하였다. 그 결과 교착상태의 평균 발생 주기, 요구연산이 보류되거나 교착상태를 유발할 확률, 사이클의 길이가 2인 교착상태가 발생할 확률 등과 같은 각종 수식을 구하였다.

• 한국정보통신학회논문지
• /
• 제18권9호
• /
• pp.2189-2196
• /
• 2014

본 논문에서는 자동차용 컴퓨터 비전 알고리즘을 고속으로 처리하기 위해 VLIW 보조프로세서를 설계하였다. VLIW 보조프로세서는 8단 파이프라인 구조로 1개의 사이클에 4개의 명령을 처리할 수 있으며, 보행자 인식을 위한 36개의 정수 및 부동 소수점 명령어 집합을 갖고 있다. 프로세서는 45nm CMOS 공정에서 최대 동작 속도는 300-MHz이며 약 210,900 게이트로 구성되며 예상 연산 성능은 1.2 GOPS 이다. VPE와 8개의 VLIW 코어로 구성된 비전 프로세서 시스템은 25~29 FPS의 보행자 검출 성능을 가진다. VLIW 보조 프로세서는 높은 검출 속도와 호스트 프로세서와 느슨한 결합 특성으로 다양한 비전 분야에 응용 가능하다.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.65-77
• /
• 2015

Resonant converters are well suited for induction heating (IH) applications due to their advantages such as efficiency and power density. The control systems of these appliances should provide smooth and wide power control with fewer losses. In this paper, a simple phase locked loop (PLL) based variable duty cycle (VDC) pulse density modulation (PDM) power control scheme for use in class-D inverters for IH loads is proposed. This VDC PDM control method provides a wide power control range. This control scheme also achieves stable and efficient Zero-Voltage-Switching (ZVS) operation over a wide load range. Analysis and modeling of an IH load is done to perform a time domain simulation. The design and output power analysis of a class-D inverter are done for both the conventional pulse width modulation (PWM) and the proposed PLL based VDC PDM methods. The control principles of the proposed method are described in detail. The validity of the proposed control scheme is verified through MATLAB simulations. The PLL loop maintains operation closer to the resonant frequency irrespective of variations in the load parameters. The proposed control scheme provides a linear output power variation to simplify the control logic. A prototype of the class-D inverter system is implemented to validate the simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1726-1728
• /
• 2003

The aging diagnosis method using partial discharge measurement detects discharge signals that critical cause of failure in insulation material operated a long time and can diagnose aging state of insulation materials with an aging analysis algorithm. The HFPD measurement method is a technique to analyze aging state of high voltage insulation materials and detect higher frequency signals than conventional PD measurement method therefore it takes less noise effect and could execute active line measurement. It is possible to analyze main discharge phenomena and obtain access to aging progress occurred in insulation materials through accumulation of HFPD signals during determined interval and expression of fractal dimension using statistical process of accumulated signals. The HFPD signals that occurred in each applied voltages are measured during 180 cycles and accumulated to the same phase of one cycle. These patterns that made by previous method are normalized with logarithm function and than inputted to neural networks. The aging diagnosis of insulation material was possible and the recognition ratio of neural network appeared very high.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.83-84
• /
• 2006

In this paper, we examine discharge characteristics of cross-linked polyethylene (since then; XLPE) according to thickness. Voltage was applied to power frequency by step method, and calibration of discharge was set to 50[pC] (slope=8.333). After the voltage was applied, for 10 [sec] (600 [cycle]), occurring discharge and number were detected. Determine of input pattern is difficult because discharge pattern is irregular. Therefore we investigated pattern using the K-means Analysis and Weibull function. Also we investigated variation of centroid and cluster.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1480-1482
• /
• 2005

The major causes of power quality deterioration are harmonic current through semiconductor switching device, due to use of nonlinear loads such as diodes rectifier or thyristor rectifiers. In response to this concerns, this paper presents a new control method of single-phase active power filter(APF) for the compensation of harmonic current components in nonlinear loads. In order to make the complex calculation to be possible, the single-phase system that has two phases was made by constructing a imaginary second-phase giving time delay to load currents. In the conventional method, a imaginary-phase lagged to the load current T/4(here T is the fundamental cycle) was made. But in this proposed method, the new signal, which has the delayed phase through the filter, using the phase-delay property of low-pass filter, was used as the second phase. As this control method is applied to the system of single phase, an instantaneous calculation was done rather by using the rotating reference frames that synchronizes with source-frequency than by applying instantaneous reactive power theory that uses the conventional fixed reference frames.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.205-208
• /
• 2008

Generally, there are several types in rear suspension. The rear suspension of subframe type consisting of side member and front/rear cross member is widely used in a medium car and full car. In the small car case, the beam of tubular type without independent suspension system is used to reduce manufacturing cost. The optimized rear suspension of subframe type using hydroforming method has been developed in this study. In designing suspension, the driving stability and durability performance should be considered as an important factor. The stability is related to dynamic frequency and durability is connected with stress analysis of structure. We focus on increasing the stiffness of suspension and decreasing the maximum stress relating to durability cycle life. For making use of the merits of hydroforming which is possible to make the bead, tube expansion, and feeding in desiring position, several optimization design techniques such as shape, size, and topology optimization are proposed. This optimization scheme based on the sensitivity can provide distinguished performance improvement in using hydroforming. Through commercial software based on the finite element, the superiority of this design method is demonstrated.

• 한국치위생학회지
• /
• 제21권5호
• /
• pp.595-600
• /
• 2021

Objectives: For postmenopausal women who participated in the 2019 National Health and Nutrition Examination Survey, we aimed to provide basic data for oral health management interventions and oral policies for each life cycle of postmenopausal women by identifying the relationship between physical activity and depression on oral health behavior and awareness symptoms. Methods: The participants of this study were 1,628 menopausal women, and their general characteristics, physical activity, depression, and oral health behavior and awareness symptoms were investigated. This study used the complex sample frequency analysis, complex sample 𝞆² test, and logistic regression analysis method, which is a sample design of the National Health and Nutrition Examination Survey. Results: The factors influencing physical activity were the use of oral hygiene device and chewing difficulty. and the influencing factors of depression experience were pain and chewing difficulty. Conclusions: As a result, physical activity and depression experience should be utilized by developing and oral health program for the promotion of oral health in postmenopausal women.

• 융합정보논문지
• /
• 제11권11호
• /
• pp.17-22
• /
• 2021

전자전에서 레이더 신호 해석은 수신한 레이더 신호에서 추출한 신호제원(방향, 주파수, 펄스반복주기, 펄스 폭, 스캔주기)으로 레이더 종류를 식별하는 기술이다. 그러나 신형 레이더, 위협환경이 고도화되면서 레이더 종류를 식별하는 과정에서 레이더 식별 모호성(Ambiguity)가 발생한다. 본 논문에서는 기존 방법의 문제점을 분석하고 새로운 방법을 제안한다. 이 기술은 레이더 스캔 주기의 펄스 도착시간 차이와 스캔주기 판별 최소 수집 개수로 스캔주기 유효성을 판별한다. 실험에 의하여 입력된 신호세기의 RMS((Root Mean Square)와 무관하게 스캔 주기 결과를 도출하는 것을 입증했다.

• Smart Structures and Systems
• /
• 제24권3호
• /
• pp.361-377
• /
• 2019

The stiffness of shape memory alloy (SMA) spring while in actuation is represented by an empirical model that is derived from the logistic differential equation. This model correlates the stiffness to the alloy temperature and the functionality of SMA spring as active variable stiffness actuator (VSA) is analyzed based on factors that are the input conditions (activation current, duty cycle and excitation frequency) and operating conditions (pre-stress and mechanical connection). The model parameters are estimated by adopting the nonlinear least square method, henceforth, the model is validated experimentally. The average correlation factor of 0.95 between the model response and experimental results validates the proposed model. In furtherance, the justification is augmented from the comparison with existing stiffness models (logistic curve model and polynomial model). The important distinction from several observations regarding the comparison of the model prediction with the experimental states that it is more superior, flexible and adaptable than the existing. The nature of stiffness variation in the SMA spring is assessed also from the Dynamic Mechanical Thermal Analysis (DMTA), which as well proves the proposal. This model advances the ability to use SMA integrated mechanism for enhanced variable stiffness actuation. The investigation proves that the stiffness of SMA spring may be altered under controlled conditions.