• Journal of the Korea Institute of Building Construction
• /
• v.1 no.2
• /
• pp.185-190
• /
• 2001

The purpose of this study is the development of practical Dry floor tile unit method that settle the defect of a wet method and designed for resin mat. With use of PE resin which is confirmed the basic property, it is developed that resin mat, joint-sealing compound with fixed form and space management to Dry floor tile unit method. The result of this study is below. 1) To acquire above the 4kgf/$\textrm{cm}^2$ - construction specification criterion, the bonding space that between resin mat and tile has to occupy the 50% of resin mat module space(10,000$\textrm{cm}^2$). 2) Criteria of bonding part plane is below. simpleness of metal form. productivity, uniform quality after injection molding cooling, easy cutting for remain space management, adhesive property, construction ability, transformation of a severed piece under pressure and so on. 3) To get the shape that could protect the interfacial breakdown, it is designed that resin mat and tile are unified after the bond input. 4) Adapted joint-sealing compound is the material of urethane kinds wedge form. Resin mat has the water passageway that could drain the water. 5) To manage the severed piece of tile, the resin mat is likely to divide the half and the quarter and the plastic drainage is developed in the severed piece.

• Current Research on Agriculture and Life Sciences
• /
• v.1
• /
• pp.113-140
• /
• 1983

This is a study on a landscape planning along the street 1~4, which are gateways to Taegu city and an important scenery. Therefore, emphasis was given to provide a bright, clean and beautiful first impression to visitors and citizens. The area is being developed for education and athletic park. Plans to construct a fountain, pergolas and a pond were set up to complement the active and passive facilities to the existing a athletic facilities in the area. Since D part in the area have alkali soil (pH 8.1), soil amendment is necessary for successful growth of trees and ground covers. When the area is filled or added with new soil for soil amendment, it will be important to use fresh soil which can support plant growth. It will be ideal to use ground covers and shrubs on the existing retaining walls along the street for keeping natural vegetation and slope stability instead of further cutting and reconstruction. It is not reasonable in technical and economic sense to remove rocks of the slope for planting trees. In order to harmonize plant color distribute, tall needle and broad leaf trees in the background as a screen, flowering trees were arranged in groups at front, and annuals were mass-planted along the footway. Natural-form-trees will be planted because they not only serve as a greenbelt but also are more economics in maintenance than formative trees.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.65-71
• /
• 2011

This paper shows variations on bandwidth for the 5-microstrip 4-port structure by cutting out part of 2nd and 4th line of 5 lines. In 2nd line case, the bandwidth to pass is decreased by 300MHz and one of two input ports operates in diplexer. Both of 2nd and 4th line cut takes each of two input ports as a diplexer. The bandwidth for 4th line case has almost same bandwidth for the unmodified structure, a bit wider than that of the 2nd line case. Especially the isolation between input and other out port in center frequency of stop band shows 41dB for port 1, 32dB for port 2.

• Journal of the Korean Home Economics Association
• /
• v.47 no.3
• /
• pp.1-9
• /
• 2009

This study was conducted to examine how patchwork was expressed in fashion based on theoretical background on its brief history and expression styles and to show its possibility of creating ways for new expression in modern fashion. This study reviewed literatures on definition, history and styles of patchwork and investigated mainly works, which had been presented in collections home and abroad since 2000, to analyze its expressive characteristics shown in modern fashion. According to analysis on the expression of patchwork, it used various painting techniques such as patterns, colors and surface effect. It included patchwork having patterns provoking elusion of fairy tails; containing painting expression of reproducing works of artists; using colors boldly and contrasting strong primary colors directly to establish purity of painting and to pursuit characteristic expression; and using expression techniques of pure art such as gradation and cutting. Second, it used a compromise expression in materials, methods and substances. Patchwork which had used cloth without a pattern or printed fabric, utilized various materials like vinyl, paper, leather, metal and plastic and had a figurative value showing a solid expression as an objet itself with new techniques and changes of connecting methods. Thirdly, it used tradition patchwork techniques. Pieced patchwork, crazy patchwork and images of traditional odd ends of cloth covering a meal were applied to a whole area or a part of cloth to avoid monotony of design and to use it as a decoration.

• Journal of Technologic Dentistry
• /
• v.9 no.1
• /
• pp.51-55
• /
• 1987

One of the primary advantages of acrylic resin teeth is their ability to bond chemically to the denture base resins. Fracture od acrylic resin teeth from a maxillary denture, however, is not uncommon. Bonding failures have been attributed to faulty boil-out procedures that fail to eliminate all traces of wax from the ridge lap surfaces of the teeth and to contamination of the ridge lap surface by careless application of tinfoil substitute. Attempts to increase the strength of the bond between acrylic resin teeth and heat-cured denture base resin include grinding the glossy ridge lap surface (in fluid system), painting the ridgelap surface of the teeth with monomer-polymer solution, and cutting retention grooves in the ridge lap surface of the teeth. This latter method has been tested by applying a tensile force in a labial direction to the incisal part of the lingual surface of the acrylic resin teeth. A progressive shear compressive load was applied at an angle to the lingual surface of acrylic resin teeth bonded to denture base acrylic resin. No statistically singificant advantage was derived by preparing retention grooves of different shapes in the ridgelap surface of the denture teeth.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.173-175
• /
• 2012

Temperature during concrete curing can be effectively used to predict the early age strength of concrete However, various current methods have limits to provide the temperature data in real time due to harsh working environment including frequent cutting of wires. This paper presents the results of our investigation of an all-in-one Wireless sensor network (WSN) for the management of the curing temperature of in-placed concrete at early curing stages. Also, the network device for transmission can be easily separated from the probe sensor part and reused consistently. The field experiment entailed measuring the curing temperature of concrete using the WSN. After fresh concrete was poured into the formworks, the signals were measured at a 150 m radius from the field office. The signal was acquired for 28 days without any dispersion or interruption at the construction site; therefore, this study confirms the applicability of the proposed system to a construction site.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.348-352
• /
• 2004

In finite element analysis of mechanical behavior of weld, typical process is first to obtain a finite element model containing residual stress by conducting welding analysis and then to examine the computational specimen for various external loading. The numerical specimen with residual stress has irregular boundary lines since one usually begins the welding analysis from a body having regular straight boundary lines and large thermal contraction takes place during cooling of weld metal. We notice that these numerical weld specimens are different from the real weld specimens as the real specimens are usually cut from a bigger weld part and consequently have straight boundaries neglecting elastic relaxation associated with the cutting. In this paper, an iterative finite element method is described to obtain a weld specimen which is bounded by straight lines. The stress distributions of two types of weld specimen, one with regular and the other with irregular boundaries, are compared to check the effect of the boundary shape. Results show that the stress distribution can be different when large plastic deformation is induced by the application of external loading. In case of elastic small deformation, the difference turns out almost negligible.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.404-409
• /
• 2004

To maximize the productivity in machining molds and dies, machine tools should operate at high speeds. During the high speed operation of moving frames or spindles, vibration problems are apt to occur if the machine tool structures are made of conventional steel materials with inferior damping characteristics. However, self-excited vibration or chatter is bound to occur during high speed machining when cutting speed exceeds the stability limit of machine tool. Chatter is undesirable because of its adverse effect on surface finish, machining accuracy, and tool life. Furthermore, chatter is a major cause of reducing production rate because, if no remedy can be found, metal removal rates have to be lowered until vibration-free performances is obtained. Also, the resonant vibration of machine tools frequently occurs when operating frequency approaches one of their natural frequencies because machine tools have several natural frequencies due to their many continuous structural elements. However, these vibration problems are closely related to damping characteristics of machine tool structures. The polymer concrete has high potential for machine tool bed due to its good damping characteristics with moderate stiffness. This paper presents the use of polymer concrete and sandwich structures to overcome vibration problems. Also, co-cure bonding method for functional part mounting was exhibited experimentally, by which manufacturing time and cost for polymer concrete bed will be remarkably reduced.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.8-15
• /
• 2004

A significant error in the end milling processes is generated due to using slender tools of which the strengths are not sufficient. In order to obtain the desired machining accuracy, therefore, it is general that at first the rough cut is implemented, then the finish cut is followed. The rough cut eliminates large volume and the finish cut does the remained part. This remaining portion after the rough cut is called as the finish allowance. Larger finish allowances make it hard to get precise dimensions at a following finish cut. Smaller finish allowances are helpful for good dimension, but it sometimes is responsible for inferior surface qualities and over cuts. This study suggests a guidance for the optimum finish allowance for machining accuracy improvement, in which the rough cuts are regulated to remain the desired margins without any over cuts. Some experiments were carried out with various cutting conditions including the change of tool strengths and depth of cuts, and also extended to up millings as well as down millings.

• Economic and Environmental Geology
• /
• v.13 no.2
• /
• pp.104-116
• /
• 1980

The Ulsan mine is one of the largest contact metasomatic magnetite and scheelite deposits in the southeastern part of Korea. Mineralization at the Ulsan mine is localized along the contact between upper Cretaceous volcanic rocks and age unknown limestone which were intruded by 58 m.y. -old biotite-horndlende granite. General zonal sequence of skarn toward crystalline limestone from limestone-volcanics contact is grandite, grandite-salite and salite zones. On the otherhand volcanics origin skarns exhibits zonal sequences toward hornfels from boundary with limestone is garnet, garnet-epidote, and epidote zone. Compositions of garnets and clinopyro xenes are determined by the X-ray diffraction and reflective indecies. Local brecciation of these early skarns were followed by formation of the later skarn as zoned patches, breccia fillings and cross-cutting veins. Paragenetic sequence of late skarn minerals which is exhibited in the zoned patches and veins is an overlapping progression with time from andradite through hedenbergite or actinolite, quartz to calcite deposition. Magnetite metallization followed early formed skarns and pyrite pyrrhoite, sphalerite, galena, tennantite, scheelite and arsenopyrite deposition were simultaneously with hedenbergite, quartz and calcite of late skarn. Filling temperatures of fluid inclusions in calcites range from $160^{\circ}$ to $280^{\circ}C$.