Processing steps such as washing and cutting, involved in preparing fresh-cut produce causes tissue damage, leading to rapid quality deterioration. Major defects of fresh-cut produce are discoloration, softening, off-odor development, and microbial growth. Packaging of fresh-cut produce has been changed to reduce these quality problems. Flexible packaging film is widely used to pack fresh-cut produce. Vacuum packaging was the popular packaging method in the beginning of fresh-cut industry in Korea. Vacuum packaging creates high $CO_2$ and low $O_2$ levels to control browning of fresh-cut produce. However, these conditions induce some visual defects and off-odor development. Discoloration problem was also found when fresh-cut produce was packaged with conventional packaging film or plastic tray. Modified atmosphere (MA) packaging is effective for prolonging shelf-life of fresh-cut produce by decreasing $O_2$ and increasing $CO_2$ concentration in the package. Retail MA packaging using different oxygen transmission rate (OTR) film and micro-perforated film has started to be applied to fresh-cut produce in Korea. Proper MA package design that provides optimum range of $O_2$ and $CO_2$ partial pressures is one of the major challenges in the industry. An initial package flushing with $N_2$ or an low $O_2$/high $CO_2$ atmosphere is also used to more rapidly establish steady-state MA condition. Film OTR and $O_2$ flushing affects the fermentative volatile production, off-odor development, electrolyte leakage, discoloration, $CO_2$ injury, microbial population of fresh-cut produce. There is also a demand for convenient packaging to attract consumers. Rigid fresh-cut produce container for retail market has increased since the packaging provides excellent protection from physical damage during transport. Rigid tray used as actual serving vessel for the consumer is increasing in Korea. The tray with flexible lid to wrap or seal fresh-cut produce is more and more gaining popularity. Further practical technology to control quality change and microbial growth for each fresh-cut product has been studied since various fresh-cut items were required. The fresh-cut industry also focuses on searching for more convenient and environmentally friendly packaging.
Recently, Difficult-to-cut materials are used in many manufacturing industry. But the difficult-to-cut materials are difficult-to-cutting process. So difficult to cut material cutting process was used after heat treatment through preheating for easy cutting process. In this study, Inconel 625 was preheating using laser heat source in computer simulation. Laser heat source temperature applied $1290^{\circ}C$ that suitable preheating temperature for Inconel 625. And temperature effects such as temperature distribution for moving heat source studied apply to similar actual process condition. Simulation results for heat treatment effects through temperature distribution verified.
Recently, the upheaval generation in the road which is under service had been reported. Due to the upheaval generation, total 4 lanes were forced to curtail to 3 lanes, and traffic was delayed. In normal situation of cut-slopes in korea, that condition is hard to detect since most cut-slopes contain discontinuous material, that is rock. Common collapses in rock-slopes is wedge failure, plane failure and toppling failure which is all individual mechanism of discontinuous rock mass. In contrast, such upheaval in the road in front of cut-slope can be generated only when circular movement is triggered within the cut-slope. In this sense, rock-slopes barely show any kind of movement in the road locates at the front of them. Numerical analysis is general method in simulation of slope displacement and evaluation of safety. However, numerical analysis programs which are related with rock-slopes are not able to simulate such upheaval movement because that programs are based on discontinuous modeling mechanism. In addition, although numerical analysis programs which are based on FEM/FDM and thus utilize continuous modeling mechanism are able to simulate circular movement and upheaval situation, they have weakness in reflecting discontinuities of rock-slope itself. In this study, detailed in-site investigation and numerical analysis based on in-site condition were performed in order to expect upheaval movement in the road. In this procedure, the FLAC program which uses continuous modeling method was utilized, and new approach reflecting discontinuity developed toward the road with a ubiquitous joint model was tried to derive reliable analysis result.
The purpose of this study is to provide information on how to improving wearing sensation and fit of boots-cut jean through analysis of the actual wearing conditions and dissatisfaction. In order to compile the information about dissatisfaction with the appropriateness of the fit of boots-cut jean, a questionnaire was administered to 150 females(between the ages of 20 and 39) living in Gwang-ju, analyzed using the SPSS WIN 12.0 program. Also, 6 blue jean manufactures were investigated, the study method was a interview about company present status, sizing system and pattern of boots-cut jean. The result of this study were as follow: 1. In wearing conditions, the 20's(51.6%) to 30's(69.1%) is found the best preferred jean is boots-cut style. The reason why consumers prefer boots-cut jeans with wearing fit does to seem charming bodyline of the adult female. 2. Body type groups by drop was classified with the usual waist, the thick waist, the thin waist. The differences among age groups, body type and so on were compared using the chi-square test. Dissatisfaction of the fit of the thick waist and the thin waist was higher than the usual waist. 3. Research on the production sizing system of 6 blue jean brands showed the total sizing system of each manufacture were $3{\sim}9$, they were reflected the sizing system of the korean Industrial Standards(KS K 0051). Therefore, it is considered necessary for boots-cut jeans pattern and sizing system for Korean consumer's body shape.
The object of this experiment is comparing heat transfer performance and pressure drop characteristics by baffle cut rate, fluid velocity and heating temperature. Experiments were carried out in cross flow heat exchanger with water as a working fluid. In this experiment, baffle cut rate is 30%, 40%, 50%, velocity is 0.5m/s, 1.0m/s, 1.5m/s, and heating temperature is $30^{\circ}C$, $40^{\circ}C$, $50^{\circ}C$. An experimental device to measure the heat transfer coefficient was constructed. The experimental result were obtained for the fully developed turbulent flow of water in tube on the condition of uniform heat flux.
본 실험은 절화장미 'Akito' 품종을 재료로 하여 4가지 색상(yellow, orange, purple, blue)을 동시에 염색하기 위한 최적 조건을 구명하고자 수행하였다. 염료용액의 pH를 3.5에서 9.0으로 처리하였을 경우, pH 가 3.5에서 4가지색 모두 흡수속도가 빨랐다. 꽃의 착색에서는 각 pH별 차이가 없었고 잎에서는 pH의 차이보다는 색상의 차이에 따라 purple과 blue에서 색 발현이 현저하였다. 염료 별 농도처리에서 $10g{\cdot}L^{-1}$ 농도에서 가장 선명한 색 발현이 되었으나 유의성은 없었고 염색의 종류에 따라 유의차를 보였다. 염색에 미치는 처리시간은 10분 후에 파스텔 색상이 발현되었고, 30분 후에는 꽃의 색상이 가장 선명하였지만 동시에 잎에서도 착색이 진행되었다. 이상의 결과로부터 절화 장미 'Akito'의 염색 시 pH 3.5, 염색농도 $5-10g{\cdot}L^{-1}$, 처리시간 10-30분간 처리가 화색의 발현 및 품질의 완성도를 높이는데 적당하였다.
Purpose: The purpose of this study was to explain de-painting phenomenon of KUH-1 tail blade and to propose useful solution of it by test. The proposed solution was evaluated by real flight, and then it applied to mass product to improve the paint qual ity of KUH-1 tail blade. Methods: This study investigated an adhesive ability of primer following surface sanding condition. The cross cut and scratch test were conducted to evaluate the adhesive strength. And the water flow test was designed to simulate a real flight condition under rain. Through water flow test, an optimal condition of tail blade to prevent a de-painting phenomenon was deduced. Finally, the improvement method was evaluated by real flight under rain. Results: The results of this study are as follows; The sequential polishing was most excellent method in primer painting quality. The results of test including cross cut, scratch and water flow showed that MIL-DTL-53039 paint with epoxy primer has excellent adhesive ability. To proof the effect of improvement, a real flight during a rain condition was conducted. Finally, the comparison between original and improved configuration was conducted. Conclusion: The painting quality of KUH-1 tail blade was improved through deriving an optimal painting condition. In detail, a condition of optimal sanding and a sort of primer and paint was showed. Finally, the reliability of tail blade was guaranteed through improving the quality of painting.
The purpose of this study was investigated to the change of vegetation coverage by elapsed years on the cut slope of forest road in Jinju-si. The results obtained could be summarized as follows; The plant coverage on the cut slope of forest road was decreased hastily in first and second year after seeding. The plant coverage on the cut slope of forest road was increased as growth of seed-sprayed from third year. But the plants were began to competition with between sprayed seeds and invaded plants from third to fifth year after seed-spray. The numbers of invading plants were gradually increased as 581 individuals from sixth year after seed-spray. The cut slopes of the forest roads turned to a good site condition for growing of invasion plants. And also the total coverage on cut slope of forest roads by invading of surrounding plants was increased more. It showed that plant invasion on cut-slopes of forest roads would be mostly influenced by surrounding plants. The number of surrounding plants on the cut-slopes of forest roads was 59 species, and the number of invading plants showed 65 species. The invading species were high in order of Boehmeria tricuspis, Oplismens undulatifolius, Miscanthus sinensis var. purpurascens, Erechtites hieracifolia and Artemisia princeps var. Orientalis In the stepwise regression analysis, main factors affecting the coverage of vegetation on the cut-slopes of forest road showed in order of elapsed years, gravel contents(30~50%), middle, sandy loam, sandy clay-loam, soil hardness, aspect(NS), concave(凹) type and gravel contents(15~30%).
A sensitivity analysis about effects of influencing factors on the stability of Soil cut slope was performed. Slope stability analyses were carried out under dry, rainy and seismic conditions. Dominant factors controlling the slope stability were chosen such as cohesion and internal friction angle, unit weight of soil, water table and seismic horizontal coefficient used for the slope stability during earthquake. Parametric stability analysis with those factors was performed for sensitivity analysis. As results of analyzing the sensitivity of factors under dry and rainy conditions, effects of cohesion, internal friction angle and unit weight of soil on the stability of slope are more critical in the dry condition than in the rainy condition. Cohesion and internal friction angle are more dominant factors influencing the slope stability irrespective of dry or rainy conditions than unit weight of soil and the horizontal seismic coefficient. The unit weight and the horizontal seismic coefficient affects crucially the stability according to conditions of slope formation and dry or rainy seasons. For the effect of horizontal seismic coefficient on stability of slope, safety factor of slope is not affected significantly by dry or rainy conditions. However, increase of the horizontal seismic coefficient under the rainy condition floes reduce the safety factor significantly rather than the dry condition. Therefore, it is needed that the location of the water table is assigned appropriately to satisfy the required safety factor of stability in the case of checking slope stability for the rainy and seismic conditions.
우리나라 중서부 천결지에서 많이 자생하는 바다 새를 사료작물화 할 수 있는지를 구명하기 위하여 채종후 저장조건, 광, 옹도, 당수깊이, 염농도 및 복토깊이가 바다새의 종자 발아에 미치는 영향을 조사하였던 바, 그 결과를 요약하면 다음과 같다. 1. 바다새 종자의 발아특성은 광의 유무 간에는 유의성이 없었으며, 광의 유무 보다는 채종후 저장 조건이 유의성이 컸고, 광과 저장조건 상호간에도 유의성이 없었다. 2. 바다새의 발아율, 평균발아일수, 발아세 및 발아계수에 대한 발아온도 효과는 환온조건 보다는 변온조건에서 양호하였고, 환온조건에서는 $35^{\circ}C$에서 환온조건에서는 $35/25^{\circ}C$에서 가장 우수하게 나타났다. 3. 담수 깊이별 바다새의 발아율, 평균발아일수, 발아세 및 발아계수는 처리 수준간 통계적 유의성이 커서 담수 깊이가 Ocm인 구에서 제일 좋았으며, 담수 깊이가 0.5cm에서 1cm로 담수 깊이가 깊어 질수록 발아율이 현저히 떨어졌고 3cm 이상 담수서는 전혀 발아가 되지 않았다. 4. 고농도형 바다새의 발아율, 평균발아일수, 발아세 및 발아계수는 처리 수준간 유의성이 커서 고농도 0.2%일 때가 발아가 제일 좋았고 고농도가 높아질수록 발아율이 떨어졌으나 고농도 1%에서도 30% 이상의 발아율을 보여 내염성이 높음을 알 수 있었다. 5. 바다새 종자의 복사 수준별 발아율, 평균발아일수, 발아세 및 발아계수는 처리 수준간 유의성이 커서 복사 깊이가 0.2cm일 때가 제일 좋았고 복사 깊이가 깊어질수록 발아특성이 떨어져 복토 깊이가 1cm 이상에서는 거의 발아가 되지 않았다.5회 예취구가 37.06%로 유의하게 낮았고 3회와 4glh 예취구에서는 각각 40.27과 40.53%를 나타내어 유의성이 인정되지 않았다. 6. 건물 생산효율은 3회와 5회 예취구의 30kg N/ha/cut 수준에서 18.9kg와 15.7kg을 나타내어 가장 높았고, 4회 예취구에서는 90kg N/ha/cut 수준에서 16.3kg으로 가장 높았다. 전 질소량은 예취번초별로 3회 예취구에서는 90kg N/ha/cut수준에서 0.52kg, 4회와 5회 예취구에서는 30kg N/ha/cut수준에에서 각각 0.51kg과 0.43kg의 높은 전 질소량을 나타내었다. 7. 경제적 액상구비 시용수준의 범위는 3회 예취구에서 107.2~151.0kg N/ha/cut, 4회 예취구에서 359.1~375.7kg N/ha그리고 5회 예취구에서 160.3~236.9kg N/ha이었으며, 이 때 얻어지는 경제적 한계수량은 각각 9.6~10.0ton/ha, 12.4~12.6 ton/ha 및 9.0~9.7 ton/ha의 범위를 나타내었다. 8. 액상구비의 시용수준에 따른 액상구비의 한계시용수준은 3회 예취구에서 420.0kg/ha, 4회 예취구에서 440.6kg/ha, 그리고 5회 예취구에서 666.3kg/ha로 추정되었다.례, 오버레이 용접기술 및 용접재료의 개발현황 둥을 중심으로 살펴봄으로서 아직 국내에서는 널리 알려지지 않은 본 기 술의 활용을 넓이고자 한다. within minimum time from beginning of the shutdown.및 12.36%, $101{\sim}200$일의 경우 12.78% 및 12.44%, 201일 이상의 경우 13.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.