DOI QR코드

DOI QR Code

A study on improvement of painting quality through a de-painting phenomenon of KUH-1 tail blade

한국형 기동헬기 꼬리 날개 디페인팅 현상을 통한 도장 품질 향상에 관한 연구

  • Received : 2014.08.11
  • Accepted : 2014.08.27
  • Published : 2014.09.30

Abstract

Purpose: The purpose of this study was to explain de-painting phenomenon of KUH-1 tail blade and to propose useful solution of it by test. The proposed solution was evaluated by real flight, and then it applied to mass product to improve the paint qual ity of KUH-1 tail blade. Methods: This study investigated an adhesive ability of primer following surface sanding condition. The cross cut and scratch test were conducted to evaluate the adhesive strength. And the water flow test was designed to simulate a real flight condition under rain. Through water flow test, an optimal condition of tail blade to prevent a de-painting phenomenon was deduced. Finally, the improvement method was evaluated by real flight under rain. Results: The results of this study are as follows; The sequential polishing was most excellent method in primer painting quality. The results of test including cross cut, scratch and water flow showed that MIL-DTL-53039 paint with epoxy primer has excellent adhesive ability. To proof the effect of improvement, a real flight during a rain condition was conducted. Finally, the comparison between original and improved configuration was conducted. Conclusion: The painting quality of KUH-1 tail blade was improved through deriving an optimal painting condition. In detail, a condition of optimal sanding and a sort of primer and paint was showed. Finally, the reliability of tail blade was guaranteed through improving the quality of painting.

Keywords

References

  1. American Institute of Marine Science(AIMS). 2001. AIMS 04-04-012, Airbus Industry Material Specification External paint system: wash primer + primer + top coat Material Specification.
  2. American Society for Testing Materials(ASTM). 2009. ASTM D3359-09, Standard Test Methods for Measuring Adhesion by Tape Test.
  3. American Society for Testing Materials(ASTM). 2013. ASTM D2197-13, Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion.
  4. British Standards. 2011. EN ISO 1518, Paint and Varnishes-Determination of scratch resistance-part1, Constant -Loading Method.
  5. Defense Acquisition Program Administration(DAPA). 2013. A88MP0001, 6-7. KUH process specification for finish requirement.
  6. Defense Acquisition Program Administration(DAPA). 2013. KDS 1520-4001, Korean Utility Helicopter.
  7. Defense Acquisition Program Administration(DAPA). 2013. KDS 1615-4003. Rotary Wing Blade Specification:6-15.
  8. DoD(Department of Defense). 1967. MIL-C-8514, Coating compound metal pretreatment.
  9. DoD(Department of Defense), 2002. MIL-DTL-64159, Water Dispensible Aliphatic Polyurethane, CARC.
  10. DoD(Department of Defense). 2011. MIL-DTL-53039, Coating, Aliphatic Polyurethane, Single Component, CARC.
  11. DoD(Department of Defense). 2012. MIL-PRF-23377, Primer coatings, epoxy, high solids.
  12. Kim, Soon-Kyung, Jeon, Eon-Chan. 1998, "A study on the Effect of Surface Roughness os Strip for Automobile in the paintability." Journal of The Korean Society of Mechanical Engineers A(7):1326-1335.
  13. Moon, Seung-Hyun, Choi, Seok-In, and Lee, Jong-Ho. 2009. "The Characteristics of Roughness and Scratch by the Coating Effect on Aluminum Sheet." Spring Conference of The Korean Society of Mechanical Engineers: 557-560.
  14. Shim, Jae Dong. 2011. "Research and Development Trends of bio-medical titanium alloy." Biomaterials Research 15(4):176-183.
  15. Yoon, Han-Ki, Choi, Seok-In. and Lee, Jong-Ho. 2011. "The Characteristics of Painted Coating on Aluminum Sheet by Sending Conditions." Journal of Ocean Engineering and Technology 25(1):44-48. https://doi.org/10.5574/KSOE.2011.25.1.044