• 한국문화재보존과학회:학술대회논문집
• /
• 2001.11a
• /
• pp.49-58
• /
• 2001

The antibacterial and insecticidal properties of ethanol extracts and volatile components extracted from Eugenia caryophyllata, Boswellia carerii, Agastache rugosa, Aristolochia contorta, and Aquilaria agallocha were evaluated. The ethanol extract and volatile component of E. caryophyllata showed strong antimicrobial effect against all strains (Mucor hiemalis, Aspergillus niger, Penicillium funiculosum, Trichodema viride) and the volatile component of B. carterii showed antimicrobial effect against all strains except T. viride. The ethanol extract of E. caryophyllata and A. contorta showed $100\%\;and\;32\%$ mortality against Reticulitermes spertus kyushuensis Morimoto for 48 hours and 72 hours, respectively. In the case of volatile component, R. aryophyllata showed $100\%\;and\;20\%$ mortality against R. spertus and Lyctus linearis GOZE, respectively. The main constitute, eugenol $(92\%)$ among nine components from volatile component of E. aryophyllata were identified as antibacterial active substance.

• Conservation Science in Museum
• /
• v.20
• /
• pp.13-30
• /
• 2018

Ancient metal objects with inlaid designs were mainly decorated using the wire inlay technique in which "V"- or "U"-shaped grooves were cut in a metal object and then filled with gold or silver. Previous studies on ancient metal objects featuring wire inlay generally attempted to ascertain the inlay techniques applied by examining photomicroscopes acquired during conservation treatment. However, they had limitations when examining wire inlay technique to the minute details. Wire inlay technique can be better investigated by enlarging X-ray films of relics using stereoscopic microscopy under transmitted light. The core processes of the wire inlay technique involve cutting grooves using a chisel and creating the inlay wires, but researchers hold varying opinions about the two processes. This study analyzed the entirety of the materials able to shed light on the main processes applied in Baekje wire inlay by examining X-ray films of relics through stereoscopic microscopy. This exhaustive research revealed that two types of techniques were used for wire inlay during the Baekje period. One is a plastic process of engraving dotted lines using a chisel and is found mostly in objects from the Cheonan and Gongju areas. The other is a cutting process that incises fine lines and was used mostly in relics from the Osan, Seosan, and Wanju areas. It is likely that the Baekje wire inlay techniques feature regional differences because the respective techniques were used or introduced by different groups of people.

• Conservation Science in Museum
• /
• v.22
• /
• pp.69-84
• /
• 2019

This study investigated the formal characteristics and chemical compositions of eighty beads excavated from a Silla tomb complex at Deokcheon-ri, Uljin in order to reveal the methods of production and the characteristics of the raw materials involved, thereby illuminating characteristics of the relics from each tomb. The beads excavated from these Silla tombs include one curved bead, one tubular bead, and 78 globular beads. Among them, the curved and tubular beads and three globular beads were identified to be made of minerals, and the remaining 75 beads are made of glass. Most of the glass beads are thought to have been produced using the drawing technique. The characteristics of the beads were classified according to their site of excavation. The globular beads from Tomb No. 34 belong to the lead-barium glass and potash glass groups, indicating that these beads were produced at a relatively earlier period in time. The glass beads excavated from the tombs in the northern portion of the complex differ in color and chemical composition from those in the southern portion, which indicates the character that each group of beads had different aspect according to site location. Considering that the excavated beads were mainly from fifth- and sixth-century tombs, it is likely that certain groups of people living around Uljin used and buried beads in their tombs. As the governance of Silla became more centralized in the sixth century, the use of beads for burial purpose appears to have come to an end in this region.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.175-184
• /
• 2012

A purpose of this research is to find out characteristic of bronze artifacts and gold ornaments excavated from Xiongnu tombs No. 2~4 at Duurlig Nars in Mongolia through scientific analysis of them. The Tombs are comparatively small. There were still lots of relics remaining although the tombs had been already robbed. Also the tombs are evaluated important since the origin of them show coexisting of chinese and northern style. First of all, an analysis result about bronze vessels found in this site, they have high lead(Pb) content and relatively low tin(Sn) content, as compared with the Bronze Han Mirror and End-fittings of Bronze Parasol Rib. Especially in case of bronze tray and bronze lamp from the no. 2 tomb and also bronze cauldron from the no. 4 tomb contain only 1wt% of tin which means binary alloy composition(Cu-Pb). Also, in the case of gold ornaments found in the no. 2 tomb, they have comparatively high purity. And the research suppose that the high possibility of that they were used soldering using alloy of Au-Cu or diffused bonding(using malachite and copper oxide) for joining gold grains of gold granulation ornament. Further scientific research and analysis in Mongolia and other countries will provide more clues to solve mystery of Xiongnu culture.

• Conservation Science in Museum
• /
• v.19
• /
• pp.53-68
• /
• 2018

Hanging scrolls and handscrolls are common mounting for East Asian painting and calligraphy in which wooden Chukmok with Chukdu of various materials are attached either at the top and bottom or at each side of a work. Hanging scroll paintings or calligraphy can be hung for appreciation and rolled up for preservation. The Chukmok and Chukdu of a hanging scroll were made from different materials and were known by distinct names in Korea, China, and Japan. In Korea, the wooden Chukmok were called sanghachukhoengmok(上下軸橫木), which means horizontal wooden bars for the top and bottom axes. The wooden Chukdu were called Chukdu(軸頭), meaning the head of an axis. These Chukmok and Chukdu were made of Korean red pine, nut pine, or shiny xylosma. In China, the rod was called zhougan(軸杆) and zhoutou(軸頭), and they were made of Japanese cedar, sappan wood, or red sandalwood. In Japan, the top rod was called hassou(八双; 八裝) and the bottom jikugi(軸木), and they were made of Japanese cedar, red sandalwood, or crystal. In Korean hanging scrolls, the cross section of a Chukdu is either flat or round, and it can be either patterned or patternless. The designs include concentric circles, two circles, and three circles. Among the portraits of meritorious subjects analyzed in this study, three examples feature concentric circles on Chukdu with a flat cross section, which coincides with most of the king's instructions housed at the Jangseogak Archives. This suggests that flat Chukdu with a concentric circle pattern were used for binding most of the paintings of meritorious subjects commissioned by the royal court.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.41-47
• /
• 2011

If the nondestructive analysis is carried out by using an X-ray Fluorescence Analyzer(XRF) for ingredient analysis with the target of gold plated silverware that plates gold on a silver basis, a singular point showing big difference at the value of weight percent(wt.%) according to the electron orbit of the principal ingredient can be confirmed. The present research made reproduced samples and carried out comparative analysis in order to suggest a basis that can judge whether the technique of gold plated silverware was used in case of remains uneasy to understand with eyes by using this singular point. As a result, the same result as analysis results of actual remains could be seen in specimens manufactured by a mercury amalgam plating method. However, in case of gold and silver alloy specimens, it could be confirmed that the difference according to the electron orbit of the principal ingredients is slight unlike plated specimens. The reason appearing at plated specimens seems to be generated while absorbing XRF beam at plated layers by double structure due to plating instead of single material. Accordingly, if this result appearing at nondestructive analysis is used, it was confirmed that the application of the technique of gold plated silverware can be judged without observing its section.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.79-85
• /
• 2019

'Experiments in Art and Technology' Group was established in the mid-20th century, and then developed the larger interdisciplinary experiments into the range of art world and its outside field. The motive power of group's activities was the collaboration between artists and engineers traversing the boundary between old different disciplinary conventions. E.A.T was officially launched in 1967 by the engineers Billy $Kl{\ddot{u}}ver$ and Fred Waldhauer and the artists Robert Raushenberg and Robert Whitman. They performed various possibility of material, technology, and engineering available to contemporary art. By reflecting the function of art and technology in society, eventually they developed the methodology of new aesthetics which had organic relationship with contemporary world. In this sense, this research have its academic significance. This paper firstly examined the socio-cultural context of emerging the E.A.T. group as a representative model for convergent practice, and verified the fact that the collaboration between artists and engineers had produced the expansion of artistic expression as well as new relationship among art, engineering, and society by considering E.A.T's various projects. Therefore, I will refer the E.A.T. group as an exemplary model for concrete method of collaboration that contemporary discourses about convergence need.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.606-616
• /
• 2021

From the collection of the National Kimhae Museum, qualitative analyses using microscopic observation, SEM-EDS, Raman spectroscopy, FT-IR-ATR spectroscopy, and GC-MS were conducted on three burnished red potteries-Jeoksaekmaoyeonwa burnished red pottery (Neolithic age red pottery), Dandomaoyeonwan burnished red pottery(Bronze age red pottery) and Jeoksaekmaoyeongajimun burnished red pottery(Bronze age red pottery)-to investigate the components of the red pigments and the binder. After the layers of the primer were separated from the red surface, crystals of red pigment particles and minerals were found on the red surface. Through SEM-EDS, Raman estimates that the red pigment is Among soil pigments with iron oxide(Fe₂O₃) as the main color development source, Red Ocher(Fe₂O₃). A band characteristic of the Urushiol polymer was detected in the FTIR-ATRspectra(4000~600cm^-1), GC-MS analysis confirmed the presence of the benzenemethanol-2-prophenyl, 4-heptylphenol, 1-tetracecanol, heptafluorobutyric texidecane, all of which are the ingredients of the directional structure of the lacquer present in the red layer. Therefore, it seemed that the three burnished red pottery: Jeoksaekmaoyeonwan pottery(Neolithic age burnished red pottery), Dandomaoyeonwan pottery(bronze age burnished red pottery) and the Jeoksaekmaoyeongajimun pottery(bronze age burnished red pottery) made by mixing minerals and Red Ocher(Fe₂O₃), with lacquer.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.1
• /
• pp.4-17
• /
• 2017

In this research, the chemical composition of the iron artifacts from the late 6th-century to early 7thcentury Baekje remains in Gwanbuk-ri, Buyeo, specifically of the nine iron artifacts including slags, furnace walls and ingot iron excavated in the District "Na", were examined by observing their chemical compounds and microstructures. As a result, GB1 and GB6 were determined to be proto-reduction lumps whereas GB2, GB3, GB4 and GB5 were determined to be tempered slags, respectively. Also, he furnace wall GB7 were containing mullite and cristobalite, which are high temperature index minerals, The extrusion temperature was found out to be about $1200{\sim}1300^{\circ}C$, and it is most likely that the smelting temperature in the furnace was in that temperature range. GB8 ingot iron was determined to be a forged ironware. This ingot iron was an intermediary product for making ironware and its nonmetallic inclusions displayed similar microstructure and contents compared to the forged iron. Because of the existence of proto-reduction lumps and forged iron, the iron making facility located in District "Na" most likely had a small-scale iron making facility that handled iron bloom smelting and refining processes.

• Conservation Science in Museum
• /
• v.24
• /
• pp.55-74
• /
• 2020

The Sacred Bell of Great King Seongdeok is required digital precision recording of conservation conditions because of corrosion and partial abrasion of its patterns and inscriptions. Therefore, this study performed digital documentation of the bell using four types of scanning and unmanned aerial vehicle (UAV) photogrammetry technologies, and performed the various shape analyses through image processing. The modeling results of terrestrial laser scanning and UAV photogrammetry were merged and utilized as basic material for monitoring earthquake-induced structural deformation because these techniques can construct mutual spatial relationships between the bell and its tower. Additionally, precision scanning at a resolution four to nine times higher than that of the previous study provided highly valuable information, making it possible to visualize the patterns and inscriptions of the bell. Moreover, they are well-suited as basic data for identifying surface conservation conditions. To actively apply three-dimensional scanning results to the conservation of the original bell, the time and position of any changes in shape need to be established by further scans in the short-term. If no change in shape is detected by short-term monitoring, the monitoring should continue in medium- and long-term intervals.