• Asian Journal of Atmospheric Environment
• /
• v.6 no.2
• /
• pp.118-126
• /
• 2012

To investigate the effect of aircraft traffic emissions on soil pollution, metal levels were analyzed for 8 metals (Fe, Cr, Pb, Zn, Cu, Ni, Mn and Cd) from the vicinity of the Indira Gandhi International (IGI) airport in Delhi, India. The texture of the airport soil was observed to be sandy. Among the metals, Cd showed minimum concentration ($2.07{\mu}g\;g^{-1}$), while Fe showed maximum concentration ($4379{\mu}g\;g^{-1}$). The highest metal accumulation was observed at the landing site. Significant correlations were observed between metals and different textures (sand, silt, and clay) as well as with organic carbon (OC). The results indicate that grain size play a major role in OC retention in soil and subsequently helps in adsorption of metals in soil. M$\ddot{u}$ller's geoaccumulation index (I-geo) showed that airport soil was contaminated due to Cd and Pb with the pollution class 2 and 1, respectively. Pollution load index of the airport site was 1.34-3 times higher than the background site. The results of factor analysis suggested that source of the soil metal is mainly from natural weathering of soil, aircraft exhaust, and automobile exhaust from near by area. With respect to Dutch target values, the airport soils showed ~3 times higher Cd concentration. The study highlighted the future risk of enhanced metal pollution with respect to Cd and Pb due to aircraft trafficking.

• Transactions of the Korean hydrogen and new energy society
• /
• v.5 no.2
• /
• pp.81-90
• /
• 1994

The hydrogen fuel tanks having hydrogen storing capacity of about 300g and 1200g are manufactured using $MmNi_{4.7}Al_{0.25}V_{0.05}Fe_{0.001}$ alloy. They are composed of several unit reactor made of Cu-tube(outer diameter = 50.1mm, thickness = 2mm). In order to increase the heat and mass transfer property of the hydride bed, Al-plates are inserted perpendicular to axial direction at intervals of 5mm and three arteries of diameter 8mm are installed symmetrically in each unit reactor. Hydrogen absorption is proceeded about 80% within 30 minute and is completed within 60 minute at the conditions of charging hydrogen pressure of 25atm and temperature of $22^{\circ}C$. On desorbing hydrogen at a constant rate of 30 slm at $20^{\circ}C$, discharging hydrogen pressure is sustained at 3~5atm for 120 minutes. The discharging pressure is increased upto 5~8atm as the increase of the reactor temperature to $30^{\circ}C$. From the experimental results and the brief discussions about the hydrogen absorption and disorption behaviors of the hydrogen storage tank, it is suggested that the behaviors of hydrogen charging and discharging could be controlled by adjusting the operating parameters and the reactor design parameters.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.4
• /
• pp.270-276
• /
• 2010

Nickel-copper foam electrodes with pore gradient micro framework and nano-ramified wall have been prepared by using an electrochemical deposition process. Growth habit of nickel-copper co-deposits was quite different from that of pure nickel deposit. In particular, the ramified structure of the individual particles was getting clear with chloride ion content in the electrolyte. The ratio of nickel to copper in the deposits decreased with the distance away from the substrate and the more chloride ions in the electrolyte led to the more nickel content throughout the deposits. Compositional analysis for the cross section of a ramified branch, together with tactical selective copper etching, proved that the copper content increased with approaching central region of the cross section. Such a composition gradient actually disappeared after heat treatment. It is anticipated that the pore gradient nickel-copper nanostructured foams presented in this work might be a promising option for the high-performance electrode in functional electrochemical devices.

• Journal of Powder Materials
• /
• v.25 no.3
• /
• pp.246-250
• /
• 2018

In this study, we investigate the deformation behavior of $Hf_{44.5}Cu_{27}Ni_{13.5}Nb_5Al_{10}$ metallic glass powder under repeated compressive strain during mechanical milling. High-density (11.0 g/cc) Hf-based metallic glass powders are prepared using a gas atomization process. The relationship between the mechanical alloying time and microstructural change under phase transformation is evaluated for crystallization of the amorphous phase. Planetary mechanical milling is performed for 0, 40, or 90 h at 100 rpm. The amorphous structure of the Hf-based metallic glass powders during mechanical milling is analyzed using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Microstructural analysis of the Hf-based metallic glass powder deformed using mechanical milling reveals a layered structure with vein patterns at the fracture surface, which is observed in the fracture of bulk metallic glasses. We also study the crystallization behavior and the phase and microstructure transformations under isothermal heat treatment of the Hf-based metallic glass.

• Resources Recycling
• /
• v.25 no.4
• /
• pp.49-53
• /
• 2016

The electro-refining process was performed to purify the casted tin crude metal from waste tin in methanesulfonic acid. The surface morphologies of electrodeposited tin on cathode were observed, the dendrite and delamination were inhibited by glycol group of organic additive. The impurity concentrations of tin crude metal and deposited metal were analyzed using ICP-OES. Quantitative analysis on casted tin crude metal showed that it consists of tin with 97.280 wt.% and several impurity metals of Ag, Cu, Pb, Ni, and etc. After tin electro-refining, the purity of tin increased up to 99.956 wt.%. Reduction current by cyclic voltammetry seems to be closely related to behavior of impurity in tin electro-refining.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.126-126
• /
• 2017

본 연구는 가축분뇨를 퇴비화 하는 과정에서 흔히 사용되는 수분조절제인 톱밥, 왕겨 등의 가격적 부담으로 인해 좀 더 가격이 저렴한 수분조절제들의 성분을 비교 분석하여 어떤 차이가 있는지 확인하기 위하여 실시되었다. 이를 위해 6가지 수분조절제를 토대로 유도결합플라즈마분광계 장비를 이용하여 화학적 분석, 인장시험기를 이용하여 물리적 분석을 하였다. 화학적 분석을 통해 수분조절제 내 함유되어 있는 성분들을 분석하였으며 물리적 분석을 통해 중량, 함수율, 흡수율, 인장강도 등을 측정하였다. 화학적으로 분석을 했을 시 K, Cd, Pb, Ni, Zn, Cu, Cr, As 등을 측정을 하였으며 앞서 분석했던 각각의 성분들은 농촌진흥청에 명시되어 있는 유해성분의 최대량보다 대부분 적게 측정이 되었다. 물리적으로 분석을 했을 시, 각 수분조절제의 함수율은 최소 10.29%에서 최대 16.07%까지 측정이 되었다. 전단강도는 기존 상태가 가장 높게 측정이 되었으며 다음으로 건조상태 흡수상태로 측정이 되었다. 일반적으로 사용하기에는 흡수율이 가장 높은 우드 브리켓-1이 가장 적합한 것으로 판단된다.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.7
• /
• pp.135-147
• /
• 2015

Remediation of metal(loid)s-contaminated sites is crucial to protect human and ecosystem. Solidification and stabilization of metal(loid)s by the binder amendment is one of the cost-effective technologies. In this study, metal (loid)s in various field-contaminated soils obtained from steel-making, metal refinery and mining tillage were immobilized by the application of single binders such as diammonium phosphate (DAP), lime, and ladle slag. The efficiency of solidification and stabilization was evaluated by Toxicity Characteristic Leaching Procedure (TCLP) and the Standard, Measurements and Testing programme of European Union (SM&T) extraction processes. In terms of TCLP extraction, the binder was effective in order of lime > DAP > ladle slag. All binders were highly effective in the immobilization of Pb, Zn, Cu, Ni, and Cd. The increased immobilization efficiency is attributed to the increase in the Step III and IV fractions of the SM&T extraction. Lime and ladle slag were highly effective in the immobilization of the metal(loid)s, however, As release increased with DAP due to competition between the phosphate originated from DAP and arsenate. A further study is needed for the better immobilization of multi metal(loid)s using binary binders.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.245-245
• /
• 2015

Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 높은 효율과 낮은 제조비용, 높은 신뢰성으로 인해 박막 태양전지 중 가장 각광받고 있다. 특히 유리기판 대신 가볍고 유연한 철강소재나 플라스틱 소재를 이용하여 발전분야 외에 건물일체형, 수송용, 휴대용등 다양한 분야에 적용이 가능하다. 이러한 유연 기판을 이용한 CIGS 태양전지의 개발을 위해서는 기판의 특성에 따른 다양한 공정개발이 선행되어야 한다. 특히 CIGS 태양전지에서는 Na의 역할이 매우 중요한데 유연기판의 경우 이러한 Na이 없을 뿐만 아니라 철강기판의 경우 Fe, Ni, Cr등의 불순물이 확산되어 흡수층의 특성을 저하시켜 효율을 감소시킨다. 따라서 이러한 철강 기판의 경우 불순물의 확산을 방지하는 확산방지막이 필수적이다. 또한 플라스틱기판의 경우 내열성이 낮아 저온에서 공정을 진행해야하는 단점이 있다. 이러한 유연기판의 특성을 고려하여 본 연구에서는 유연기판으로 STS 430 stainless steel과 poly-imide를 이용하여 특성 개선을 진행하였다. 먼저 stainless steel과 Poly-imide, soda-lime glass, coning glass의 기판을 이용하여 기판에 따른 흡수층의 특성을 비교 분석하였으며 stainless steel 기판을 이용하여 확산 방지막의 유무 및 두께에 따른 흡수층 및 소자의 특성을 분석하였다. 이때 확산 방지막은 기존 TCO 공정에서 사용되는 i-ZnO를 사용하였으며 RF sputter를 이용하여 50~200nm로 두께를 달리하며 특성 비교를 실시하였다. 이때 효율은 확산방지막을 적용하지 않았을 때 약 5.9%에서 확산 방지막 적용시 약 10.6%로 증가하였다. 또한 poly-imide 기판을 이용하여 $400^{\circ}C$이하에서 흡수층을 제조하여 특성평가를 진행하였으며 소자 제조 후 효율은 약 12.2%를 달성하였다. 모든 흡수층은 Co-Evaporation 방법을 이용하여 제조하였으며 제조된 흡수층은 SEM, XRF, XRD, GD-OES, PL, Raman등을 이용하여 분석하였으며 그 외 일반적인 방법을 이용하여 Mo, CdS, TCO, Al grid를 제조하였다. AR 코팅은 제외 하였으며 제조된 소자는 솔라 시뮬레이터를 이용하여 효율 특성 분석을 실시하였으며 Q.E. 분석을 실시하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.5
• /
• pp.697-711
• /
• 2004

Severe haze, mist, and fog phenomena occurred in the central part of Korea during 15~25 May 2003 resulted in poor visibility and air quality. When these phenomena occurred, Korean peninsula was under the effects of anticyclone. The atmosphere was stable, and wind speed was so weak. Under this meteorological conditions, air quality was worse and worse. The characteristics of aerosol in Seoul, Incheon, and Gosan (Jeju) during this period are investigated from the $PM_{10}$. TSP concentrations and aerosol number concentrations. Concentrations of $PM_{10}$ and TSP measured at KMA increased upto 176 and 230 J.${\mu}g/m^3$ on 22 May 2003, respectively. Aerosol number concentrations of size range from 0.82 to 6.06 ${\mu}m$ increased in Seoul on 17, 19, and 21~24 May 2003, and the concentrations of $NO_2$ and $SO_2$had maximum value of 0.165 ppm at Gwanak Mt. and 0.036 ppm at Guro-dong on 23 May 2003, respectively. Result from analysis on heavy metal elements showed high concentrations of Zn, Pb, Cr, Ni, Cu, and Cd during 20~24 May 2003. This event is examined by comprehensive analyses of synoptic weather conditions, satellite images, concentrations of suspended particles and air pollutants, and heavy metal elements.

• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.539-548
• /
• 1998

Multidentate N,O-containing ligands, such as N,N'-bis(2-hydroxybenzyl)-ethylenediamine(BHED), N,N'-bis(2-hydroxybenzyl)-propylenediamine(BHPD), N,N'-bis(2-hydroxybenzyl)-diethylenetriamine(BHDT), N,N'-bis(2-hydroxybenzyl)-triethylenetriamine(BHTT) and N,N'-bis(2-hydroxybenzyl)-tetraethylenepentaamine (BHTP) were synthesized by reduction of the imine group of Bis(salicylidene)-ethylendiamine(BSED), Bis (salicylidene)-propylenediamine(BSPD), Bis(salicylidene)-diethylentriamine(BSDT), Bis(salicylidene)-triethylenetetraamine(BSTT) and Bis(salicylidene)-tetraethylenepentaamine(BSTP). Proton dissociation constants of the ligands and stability constants of transition metal(Ⅱ) ion complexes with BHED, BHPD, BHDT, BHTT, and BHTP were determined by potentiometic titration. The sequence of stability constants $(logK_{ML})$ of complex increases as BHED Zn(Ⅱ) which follows the Irving-Williams series.