• Current Photovoltaic Research
• /
• v.3 no.2
• /
• pp.61-64
• /
• 2015

In solar industry, numerous researchers reported about cold spray method among various electrode formation technic, but there are no known a bonding mechanism of metal powder. In this study, a cross-section of copper electrode formed by cold spray method was observed and heterogeneous phase between silicon substrate and copper electrode was analyzed using morphology observation technic. SEM and TEM analysis were performed to analyze a crystallinity and distribution shape of heterogeneous copper phase. Molecular dynamics simulation was performed to calculate glass transition temperature of copper metal. In the result, amorphous copper phase was observed near interface between silicon substrate and metal electrode. The results of the molecular dynamics simulation show that an amorphous copper phase could be formed at a temperature below the melting point of copper because cold spraying resulted in a lower glass transition temperature.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.393-401
• /
• 2011

Natural Curcumin belongs to Zingiber Officinale Roscoe was known to possess natural odor, natural taste, natural color, and other pharmaceutical & chemical characteristics. Natural Curcumin extract was made to use ethanol as a solvent was to show a yellow color having state of solid powder and an active component. Natural Curcumin extract tested pharmaceutical & chemical experiment to dilute in curcumin 1%-water solution. Curcumin extract tested antimicrobial experiment using microbe, and tested dye experiment using fiber. Some conclusions in the result of characteristics experiment was obtained as follow. The result of antimicrobial experiment showed that the growth of staphylococcus aureus (ATCC-001) and aspergillus niger (ATCC-002) as microbes decreased according to passage of time. This phenomenon could know that Curcumin compoment showed influence to antimicrobial effect. Also, the result of dye experiment showed that cotton and sick with fiber dyeing dyed in direction of dark yellow color. This phenomenon could know that Curcumin extract showed influence to dyeing effect in observation of optical electron microscope(OEM.) The result of instrument analysis ascertained inorganic components of K(53.300ppm), Na(1.150ppm), Ca(0.711ppm), Ti(0.351ppm), Li(0.256ppm), Cu(0.233ppm) etcs from Curcumin component with ICP/OES, and ascertained organic components of propanoic acid(1.859), benzene(10.814), phenol(14.194) etcs from Curcumin component with GC/MSD.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.103-107
• /
• 2009

$Bi_2Sr_2Ca_1Cu_2O_x$(BSCCO 2212) superconductors for current lead were fabricated by centrifugal melting process(CMP). BSCCO 2212 powder was melted at $1200^{\circ}\C$ in a resistance furnace using a Pt crucible and poured in a rotating cylindrical mold preheated at $550^{\circ}\C$ for 2 hour. The solidified BSCCO-2212 samples were heat-treated by partial melting process in oxygen atmosphere. The current-voltage curves at 77 K of the samples were obtained by transport measurement, and the microstructure was investigated by scanning electron microscope. The $J_c$ values at 77 K of the tubes partially melted at $840^{\circ}C,\;860^{\circ}C\;and\;880^{\circ}C$ were 492, 430 and 398 $A/cm^2$, respectively. It was observed that the plate-like grains in BSCCO 2212 tube was more developed in the sample heat-treated at $840^{\circ}C$. It was found that the critical current of the BSCCO 2212 samples was dependent on the partial melting schedule regarding the grain shape and size of the BSCCO 2212.

• Food Science and Preservation
• /
• v.7 no.2
• /
• pp.201-206
• /
• 2000

${\beta}$-Galactosidase was extracted and purified from strawberry. The purified ${\beta}$-Galactosidase from strawberry was investigated their physicochemical characteristics. ${\beta}$-Galactosidase was purified 25.74 fold from strawberry. The purification procedure include ammonium sulfate fraction, acetone powder treatment and gel and ion exchange chromatography. Yield of the enzyme purification was 18.11%. The purified enzyme has native molecular weight of 116,000 dalton. Vmax value and Km value of ${\beta}$-Galactosidase were 0.077 mM ONPG/ml/15mim and 1.75x10-2mM, respectively. The optimum temperature and pH of ${\beta}$-Galactosidase were 43$^{\circ}$C and pH 4.0, respectively. The ${\beta}$-Galactosidase activity was stable below 50$^{\circ}$C and at pH 4.0 to pH 6.0. Among the metal ions Ca and Mg were did not affect, whereas K, Cu and Zn show a little effect on the enzyme activity. The ${\beta}$-Galactosidase activities were inhibited by treatment with EDTA and SDS.

• Journal of the Korean Home Economics Association
• /
• v.42 no.7
• /
• pp.63-72
• /
• 2004

This study discussed the dyeing of wool and cotton fabrics with Betel Palm Tree White woolen fabrics and cotton fabrics purchased from HATH (Korea Apparel Testing ＆ Research Institute) were used as experimental fabrics. Using dyeing powder extracted from dyeing material, various temperatures, dyeing times, and pH were used in the dyeing process. Al, Cr, Fe, Cu, and Sn were used as mordant and the absorption was compared with different mordanting methods. The optimum condition for pre-mordanting dyeing was dye concentration of 25% (o.w.f) and mordant concentration of 0.5$^{\circ}$∼1%. Woolen fabric showed an increase of absorption and the maximum absorption was achieved at weak acidity. According to the mordanting methods, woolen fabrics and cotton fabrics were treated with various mordanting agents, a mordant rate of 1:100, at 60$^{\circ}C$, for 30 minutes and dyed with a dyeing material concentration of 25% (o.w.f), at a rate of 1:100, at 60$^{\circ}C$ for 60 minutes. The best dyeing effect w3s achieved at the temperature of 60$^{\circ}C$ for cotton and 80$^{\circ}C$ for wool fabrics. The light fastness of cotton and wool fabrics was low and particularly the fastness to perspiration was decreased with Fe mordanting. I concluded that pre-mordanting method was better than post-mordanting method for cotton and woolen fabrics.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.4
• /
• pp.241-250
• /
• 1997

The velocity dispersion of surface acoustical wave(SAW) of Si layer/mesh Au/Si substrate was measured by the frequency analysis technique of backward radiation at liquid/solid interface. The difference of backward radiation patterns depending on used transducers (2, 5, 10MHz) confirmed that the backward radiation phenomenon was caused by the energy radiation from SAW generated in surface region. An ultrasonic goniometer was constructed to measure continuously the angular dependence of backscattered intensity. The angular dependences of backward radiation(5MHz) were measured for Ni layer/Al substrate specimens that were bonded by epoxy involving different content of Cu powder. It was known that the width and pattern of backward radiation had informations such as the velocity dispersion, bonding quality and structure of surface region.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.1
• /
• pp.37-42
• /
• 2012

$WS_2$ powder was added to the Cu/Sn bond metal of diamond micro-blades for machining of semi-conductor and IC chips to improve cutting efficiency. The effect of $WS_2$ additive on cutting efficiency was investigated and compared with the micro-blades with $MoS_2$ developed in previous research. Flexural strength, frictional coefficient, and wear resistance of blades decreased with $WS_2$ but wear depth increased. It was found that the blades including $WS_2$ consumed less momentary energy than the blades containing $MoS_2$ during dicing test. Micro-blades containing $WS_2$ exhibited lower flexural strength than the blades with $MoS_2$ resulting from higher amount of sintering defects relevant to the less effectiveness of $WS_2$ on fluidity. The effect of $WS_2$ and $MoS_2$ on fluidity during sintering was analyzed in terms of mismatching degree between the longitudinal direction of lubricant particles and the perpendicular direction to the compact loading. The blade with 8.1 vol.% of $WS_2$ showed the best cutting efficiency.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.551-552
• /
• 2006

The miniature fuel cells have emerged as a promising power source for applications such as cellular phones, small digital devices, and autonomous sensors to embedded monitors or to micro-electro mechanical system (MEMS) devices. Several chemicals run candidate at a fuel in those systems, such as hydrogen. methanol, ethanol, acetic acid, and di-methyl ether (DME). Among them, hydrogen shows most efficient fuel performance. However, there are some difficulties in practical application for portable power sources. Therefore, more recently, there have been many efforts for development of micro-reformer to operate highly efficient micro fuel cells with liquid fuels such as methanol, ethanol, and DME In our experiments, we have integrated a micro-fuel processor system using low temperature co-fired ceramics (LTCC) materials. Our integrated micro-fuel processor system is containing embedded heaters, cavities, and 3D structures of micro- channels within LTCC layers for embedding catalysts (cf. Figs. 1 and 2). In the micro-channels of LTCC, we have loaded $CuO/ZnO/Al_2O_3$ catalysts using several different coating methods such as powder packing or spraying, dipping, and washing of catalyst slurry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.55-58
• /
• 2002

PIT method which is used at fabricating Bi-2223/Ag HTS wire includes a drawing process, conventional deformation method. Drawing of meta1(Ag) and ceramic (BiSrCaCuO) composite is also difficult and significant for uniform deformation. In this paper, parameters of uniform deformation was studied at Bi-2223/ Ag multifilamentary HTS wire. Powder and rod as a starting precursor was compared at 55 filament and 54 filament Bi-2223/Ag HTS wire, respectively. Micro-hardness and area COV of the filaments was also evaluated when the diameters were decreased through drawing operations.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.3
• /
• pp.452-457
• /
• 2010

To obtain basic information on the utilization of Suaeda (S.) asparagoides $M_{IQ}$ as a raw material in food, it's chemical components of were investigated. S. asparagoides $M_{IQ}$ from the Hwaseong-si in Korea was used after drying and grinding with powder. The total dietary fiber, insoluble dietary fiber and soluble dietary fiber contents of S. asparagoides $M_{IQ}$ were found to be 39.41%, 37.63% and 1.78%, respectively. Macromineral components of S. asparagoides $M_{IQ}$ were Na (7.6%), K (2.4%) and Mg (0.6%). High contents of microminerals such as Cu, Mn and Zn were also found. Lysine and methionine which are essential amino acids were detected with the value of 215 mg/100 g and 23.2 mg/100 g, respectively. S. asparagoides $M_{IQ}$ that was harvested in May was higher in crude protein than that harvested in September but the crude fat content of that which was harvested in September was twice as high as that harvested in May.