• 대한유전성대사질환학회지
• /
• 제14권2호
• /
• pp.150-155
• /
• 2014

The measurement of $17{\alpha}$-hydroxyprogesterone ($17{\alpha}$-OHP) in a dried blood spot on filter paper is an important for screening of congenital adrenal hyperplasia (CAH). Since high levels of $17{\alpha}$-OHP are frequently observed in premature infants without congenital adrenal hyperplasia, we evaluated cuts-off based on birth weight and performed validation. Birth weight and $17{\alpha}$-OHP concentration data of 292,204 newborn screening subjects in Greencross labopratories were analyzed. The cut-off values based on birth weight were newly evaluated and validated with the original data. The mean $17{\alpha}$-OHP concentration were 7.25 ng/mL in very low birth weight (VLBW) group, 4.02 ng/mL in low birth weight (LBW) group, 2.53 g/mL in normal birth weight (NBW) group, and 2.24 ng/mL in heavy birth weight (HBW) group. The cut-offs for CAH were decided as follows: 21.12 ng/mL for VLBW and LBW groups and 11.14 ng/mL for NBW and HBW groups. When applied new cut-offs for original data, positive rates in VLBW and LBW groups were decreased and positive rates in NBW and HBW groups were increased. The cut-offs based on birth weight should be used in the screening for CAH. We believe that our new cut-off reduce the false positive rate and false negative rate and our experience for cut-off set up and validation will be helpful for other laboratories doing newborn screening test.

• Steel and Composite Structures
• /
• 제34권1호
• /
• pp.53-73
• /
• 2020

A novel all-steel miniature bar-type structural fuse (MBSF) with cold formed bolted connections is developed in this study, which consists of a central energy dissipation core cut from a smooth round bar, an external confining tube and nuts. Three types of cross sections for the central energy dissipation core, i.e., triple-cut, double-cut and single-cut cross sections, were studied. Totally 18 specimens were axially tested under either symmetric or asymmetric cyclic loading histories, where the parameters such as cut cross sectional area ratio, length of the yielding portion and cross sectional type were investigated. Numerical simulation of 2 representative specimens were also conducted. An analytical model to evaluate the bending failure at the elastic portion was proposed, and a design method to avoid this failure mode was also presented. The experimental results show that the proposed MBSFs exhibit satisfactory hysteretic performance under both the two cyclic loading histories. Average strain values of 8% and 4% are found to be respectively suitable for designing the new MBSFs as the ultimate strain under the symmetric and asymmetric cyclic loadings.

• 복식문화연구
• /
• 제1권2호
• /
• pp.145-157
• /
• 1993

This study aimes to investigate the garment ease of pe-school children's clothing in accordance with arm movement. The experiment was done with 4 per-school children fro mage 3 to age 5, and 3 types of experimental clothes were made ; sleeveless, half sleeve, and long sleeve. The waist pattern and the sleeve pattern of each experimental clothes has no garment ease. And experimental clothes were examined to obtain the necessary ease of armcye line and waist lien by cross-cut method. The results of investigation can be summarized as follows ; 1. The resulting movement ranges of experimental clothes with no garment ease were 131.5°(sleeveless), 71.75°(half sleeve), and 62.25°(long sleeve). 2. The size order of cross-cut opening of waist lien movement were (side>front>back), and (half sleeve>long sleeve>sleeveless). 3. When the base point of measurement was set to armpit point by arm the latitudinal length of cross-cut opening of armcye line by arm movement was (anterior armpit part > posterior armpit part), and longitudinal length of cross-cut opening was (upper part>lower part).

• 터널과지하공간
• /
• 제22권1호
• /
• pp.43-53
• /
• 2012

개착면의 방향성과 규모가 점진적으로 변화되는 개착사면의 안정성을 지반의 암석학적, 구조적 및 역학적 특성을 종합적으로 고려한 횡단면 분석기법을 활용하여 분석하였다. 시추작업을 수행하여 획득한 코어시료를 관찰하여 사면지반의 암석학적 취약성을 조사하였으며, 시추공 내 BIPS 영상을 획득하여 사면 내부의 구조적 특성을 규명하였다. 시추코어 및 코어절리시료를 이용한 암석실험을 통해 사면 지반의 공학적 특성을 분석하였다. 평사투영해석을 수행하여 잠재적인 사면거동 양상과 거동유발 절리들을 분석하였으며, 거동유발 절리들의 트레이스 분포를 개착 형상이 고려된 횡단면상에 도시하였다. 횡단면에 분포된 평면파괴 절리들이 기저면을 형성하는 평면블록들을 절리 트레이스 분포를 고려하여 설정하였다. 횡단면 상에서 심도별 평면블록들의 안정성과 적정 안전율을 유지하기 위하여 요구되는 지보량을 산정하여 최적 사면 설계안 수립에 대한 횡단면 기법의 활용성을 고찰하였다.

• 공업화학
• /
• 제33권4호
• /
• pp.381-385
• /
• 2022

유해화학물질의 감지 센서 개발을 위해 기재 필름과 전도성 페이스트의 접착 내구성 확보가 매우 중요하다. 본 연구에서는 폴리에틸렌테레프탈레이트(polyethylene terephthalate, PET) 필름에 폴리아닐린/그래핀나노플레이트(graphene nano plate, GNP) 페이스트를 코팅하여 접착 특성을 평가한 결과 cross cut 0B 또는 1B 등급으로 센서 적용에 문제가 있어 에스테르계 바인더를 이용하여 접착 특성 개선 연구를 수행하였다. 에스테르계 바인더가 10 wt% 이상 첨가되면 센서 적용이 가능한 cross cut 등급이 3B 이상을 나타내었다. 바인더의 과량 첨가는 전도성 페이스트의 전기적 특성에 영향을 줄 수 있으며 실제로 황산에 대한 반응성이 감소함을 확인하였다. 전기적 특성 개선을 위해 카본블랙(carbon black, CB) 함량 변화 시험을 수행하였고 CB 2 wt%에서 최적의 전기적 특성을 보임을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.52-59
• /
• 2015

소경 참나무 횡절목을 열처리하여 브로치 등 악세사리용 소재로 개발하였다. 그러나 국산참나무는 난건조수종으로 특히 횡절 원판을 건조결함없이 건조하기 어렵다. 소경 굴참나무(Quercus variabilis)에서 얻은 원판(섬유방향 길이 7 mm)을 여름과 가을에 강제송풍천연건조하면서 여러 조건에 따른 건조수율을 조사하였다. 같은 조건에서 가을에 건조한 시편의 최종 평균함수율이 여름에 건조한 시편의 평균함수율보다 낮았다. 두 계절 모두 큰 직경의 시편은 풍속에 따른 차이를 보이지 않았으나 작은 직경의 시편은 풍속이 높았을 때 최종 평균함수율이 약간 낮았다. 두 계절 모두 직경이 큰 시편의 할렬 발생빈도가 직경이 작은 시편보다 높았는데 가을에는 2배 정도인데 반해 여름에는 4배가 넘었다. 여름에 낮은 풍속에서 건조한 큰 직경 시편의 할렬 발생빈도가 높은 이유는 여름의 높은 습도와 낮은 풍속으로 반복적인 수분 응축과 증발이 일어났기 때문으로 설명할 수 있다.

• 한국생산제조학회지
• /
• 제5권3호
• /
• pp.58-65
• /
• 1996

This thesis is concerned with the study on the characteristics of the cutting resistance occurring in finish machining of hardened steels such as carbon tool steel and alloy tool steel by a ceramic tool with nose radius. For the purpose, the shape of cutting cross-section made at nose part of the tool was analyzed geometrically and the wear mechanism on the flank face of the ceramic tool is investigated. In order to investigate the characteristics of cutting resistance two categories of cutting conditions are suggested, along with geometrical analysis. One category includes the conventional cutting parameters such as feed and depth of cut, another containing new cutting parameters of thickness of cut and width of cut etc. Thickness of cut width of cut and area of undeformed chip section formed by the condition of engagement between workpiece and cutting tool are determined as the function of feed, depth of cut and nose radius of cutting too, And an effective approach angle is determined by depth of cut and nose radius.

• 터널과지하공간
• /
• 제21권1호
• /
• pp.20-32
• /
• 2011

개착과정에서 붕락현상이 발생한 암반사면의 거동양상을 분석하였다. 개착사면 암반의 특성 분석을 위하여 시추작업을 수행하였으며, BIPS 영상 분석을 통하여 불연속면의 방향성과 시추공 내의 출현 위치를 측정하였다. 회수된 코어를 관찰하여 암반 내부의 구조적 취약성을 고찰하였다. 절리면에 협재된 팽윤성 점토광물의 조성을 X-선 회절분석을 통하여 조사하였으며, 직접전단실험을 수행하여 절리면 전단강도를 측정하였다. 사면파괴를 유발시킬 수 있는 절리들의 위치 및 방향성을 고려한 블록해석을 수행하여 규모별 블록안정성을 산출하였다. 횡단면 해석기법을 이용하여 개착과정 중에 발생할 수 있는 지반거동 양상을 분석하였으며, 안정성 확보를 위하여 소요되는 보강량을 산정하였다. 보강작업이 수행된 개착사면의 추가적인 거동양상을 계측 해석을 통하여 고찰하였다.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.112-119
• /
• 1995

Early fracture and cutting force of ceramic tool for hardened STC3 steel was investigated in this study. It was found that early fracture of ceramic tool was mostly occurred before normal wear was progressed beyond a critical cutting speed and normal wear was performed under the critical cutting speed. The relationships among critical cutting speed, which was a cause of early fracture, suggested cutting cross section, that is, maximum thickness of cut and width of cut, and cutting force were examined. The following conclusions were obtained: (1)Critical cutting speed showed a high value in the case of small maximum thickness of cut and large nose radius, but was not influenced by width of cut, (2)Principal, feed and radial force, respectively, showed the proportional value to constant cutting area, width of cut and maximum thickness of cut orderly, (3)Occurrence of early fracture was dependent upon radial force.

• Clinics in Shoulder and Elbow
• /
• 제21권2호
• /
• pp.67-74
• /
• 2018

Background: Fatty degeneration of rotator cuff is a well-known predictor of postoperative outcome. The purpose of this study was to evaluate the clinical features of rotator cuff tears involving subscapularis, and investigate whether fatty degeneration quantified from only the upper subscapularis correlates better with clinical outcomes than quantified from the whole subscapularis. Methods: We retrospectively analyzed 315 consecutive patients who underwent arthroscopic repair for rotator cuff tears involving subscapularis with a minimum follow-up of 1 year. Preoperative and postoperative visual analogue score for pain, range of motion and functional scores were assessed. Integrity of the repaired tendon was assessed at the 1-year follow-up with either magnetic resonance imaging or ultrasonography. Results: The mean Goutallier grade of whole cross-section was significantly lower than that of upper cross-section (1.59 vs. 1.71, p<0.05), but significantly higher than that of lower cross-section (1.59 vs. 1.01, p<0.05). In analysis of 37 re-tears, the occupancy of severe fatty degeneration in upper cross-section was 86.5%, which was significantly higher than that seen in whole cross-section (56.8%, p<0.05). We calculated the cut-off tear size for prediction of re-tears as 19.0 mm for retraction and 11.0 mm for superior-inferior. The cut-off Goutallier grade was 2.5 for both whole and upper cross-sections, but area under the curve was greater in the upper cross-section than the whole (0.911 vs. 0.807). Conclusions: As fatty degeneration of upper subscapularis demonstrated a more distinct spectrum than whole subscapularis, we suggest that measuring fatty degeneration of upper subscapularis can be a more useful method to predict clinical prognosis.