• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.4
• /
• pp.189-199
• /
• 2002

This study is intended to propose a systematic procedure for the development of the conditional assessment based on the safety of structures and the cost effective performance criteria for designing and upgrading of bridge structures. As a result, a set of cost function models for a life cycle cost analysis of bridge structures is proposed and thus the expected total life cycle costs (ETLCC) including initial (design, testing and construction) costs and direct/indirect damage costs considering repair and replacement costs, human losses and property damage costs, road user costs, and indirect regional economic losses costs. Also, the optimum safety indices are presented based on the expected total cost minimization function using only three parameters of the failure cost to the initial cost (${\tau}$), the extent of increased initial cost by improvement of safety (${\nu}$) and the order of an initial cost function (n). Through the enough numerical invetigations, we can positively conclude that the proposed optimum design procedure for bridge structures based on the ETLCC will lead to more rational, economical and safer design.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.1-7
• /
• 2015

This study first addresses the ineffectiveness of indirect regulation on industrial machines. Analysis of causes of industrial accidents associated with industrial machines further reveals the fact that technical causes need to be resolved at the manufacturing stage to reduce the frequency and strength of industrial accidents. Balanced safety certification on manufacturers and safety inspection on users of industrial machines are then suggested to effectively resolve such technical causes. The effectiveness of such safety certification and safety inspection can be justified by cost-benefit analysis. Particularly, balance in expected benefits of safety certification and safety inspection is a key issue for validity of such analysis. The accumulated benefit-costs for press brake and portable sawing machine confirm the effectiveness of such safety system.

• Journal of the Korean Society of Safety
• /
• v.21 no.3 s.75
• /
• pp.31-37
• /
• 2006

To apply easily the K-RBI program in domestic industries, an implemental procedure for K-RBI program was prepared. The K-RBI program had been developed, based on API-581 BRD. Therefore, through the usage of the developed K-RBI program and the implemental procedure, industries would have a benefit from reduced costs by modifying a frequency of an inspection efficiently. Also, the reliability of facilities would be maximized through improvement of an inspection method for facilities, considering its risk.

• Journal of Korean Institute of Industrial Engineers
• /
• v.9 no.1
• /
• pp.33-43
• /
• 1983

This paper develops a general methodology for evaluating inspection (mainly, safety inspection) policies, standard and regulations in a complex system with lots of components. Based on practically available data, this methodology enable planners and regulators to estimate the costs and effectiveness of different inspection policies when applied under different system working conditions. As main tools, the concepts of detection probability and earliness of detection are developed in this paper.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.6
• /
• pp.960-969
• /
• 2015

Over time, the import of seafood has been increased causing a corresponding increase in recall and recall costs of the fishery on the threshold level. In order to reduce recall costs and to ensure the safety of imported seafood, a moveable lab and its supporting software specialized in seafood inspection were designed. A new fishery quarantine support system software, ‘M-LIMS’ is proposed to strengthen an inspection and quarantine process for the imported seafood at the local level. This new software reads data from an external inspection equipment when it is connected to a USB or RS232 cable inspection equipment on a regular basis to save a report sent to the server after its use. Reading was possible by reading records on a central server. Each time users can check own data through a mobile device.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.6
• /
• pp.643-653
• /
• 2020

The concrete lining inspection by inspector after traffic control poses various problems such as congestion caused by traffic control and social loss costs resulting from it, and risks of traffic accidents and safety accidents for inspectors et al. To solve the problems, the concrete lining inspection has been carried out using automatic inspection equipment and image analysis that can be objectively and quantitatively investigated in overseas. In this study, to solve the problems of concrete lining inspection by inspector and to review improvement plan for inspection, inspection was carried out using automatic inspection equipment for ◯◯ tunnel that precision safety diagnosis has been conducted in 2019. Analysis was carried out for both inspection results. Automatic inspection equipment investigated defects in concrete lining such as cracks more accurately than precision safety diagnosis.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.217-223
• /
• 2008

Measurement is used for evaluation of product or process exactly. If it couldn't measured correctly, Quality-cost must be raised and it would be hard to improve product quality. So, this study suggests improvement guide line for the multilateral problems of measuring instrument operation based on the investigation of 157 small and medium-sized enterprises in February, 2008. To use inspection gig correctly, man who treat it must be accustomed with the structure, the performance, the method. The inspection gig is selected properly for the measurement goal. If not, results couldn't be correctly or wasted time, efforts, and costs. When selecting a inspection gig, the locating, the clamping, and the efficiency must be considered.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.4
• /
• pp.31-37
• /
• 2011

Pressurized Water Reactor Owners Group(PWROG) proposed and applied a risk-informed inservice inspection(RI-ISI) program to alternate existing ASME Section XI periodic inspections. The RI-ISI programs enhance overall safety by focusing inspections of piping at high safety significant(HSS) and locations where failure mechanisms are likely to be present, and by improving the effectiveness on inspection of components because the examination methods are based on the postulated failure mode and the configuration of the piping structural element. The RI-ISI programs can reduce NDE, man-rem exposure, costs of engineering analysis, outage duration and chance of complicating plant operations etc. RI-ISI methods of piping inservice inspection were applied on 3 units(KSNP : Korea Standard Nuclear Power Plant) and are scheduled to apply on the other units. In this paper, we compared and showed the results of the 2 units and we concluded that the RI-ISI application could enhance and maintain plant safety and give unquantifiable benefits.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.4
• /
• pp.1-9
• /
• 2001

Cost-benefit analysis was investigated to propose the analysis method of the effect of investment and the optimum investment level of safety management cost for preventing gas accident in the B governor station. From five classifications of safety management costs consisting of cost items with similar characters and potential accident costs calculated by risk assessments(FMEA/HAZOP), we found that the order of the benefit(the reduction cost of the potential accident cost) was the instrument increase and repair cost > the safety checking and inspection cost > the labor and training cost > the safety equipment and corresponding cost > the research and development cost. As the benefit was increased with increasing the investment cost, the effect of investment was increased with decreasing the Investment cost. As a result, the optimum safety management cost was estimated and the investment level was analyzed by the model of optimum investment level.

• Korean Journal of Occupational Health Nursing
• /
• v.12 no.2
• /
• pp.99-109
• /
• 2003

Although occupational accidents caused by presses are found to be the highest in manufacturing industrial groups, there are no study regarding to annulment for periodical inspection of press. The purpose of this study was to evaluate the economic benefit of periodical inspection of press for preventing accidents. The cost-benefit analysis in this study was conducted to evaluate the relative magnitude of benefit to cost. Study samples were 26 and years analysed were 1995, 1996, 1998 and 1999. Personal interviews with safety managers were held from October 7 to November 2, 2002. Costs of the periodical inspection program were compared with the benefit of accident that caused by presses. Costs and benefits were calculated at an discount rate of 5%. The benefit-cost ratio was 5.7. The sensitivity analysis for the discount rate, the number of press, and size of industry showed that every benefit-cost ratios were upper than one(1.0). The results of this study suggested that periodical inspection for press is important program for preventing accident and the regulation for periodical inspection program should be reenforced by government.