• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.775-781
• /
• 2022

As part of research to develop a permanent wave-reducing agent for hair, in the current study, 0.1%-1.0% of Polyquaternium-10 was added to a permanent reagent containing Nicotinoyl Dipeptide-23 to prepare the agent, which was tested on damaged hair. The pH change was relatively stable even after a date, but due to the hair's natural composition, 0.1%-0.6% of the Polyquaternium-10 concentration according to pH was suitable. The temperature safety experiment demonstrated it to be stable at a high temperature and at room temperature, but when a Polyquaternium-10 concentration of 0.9% or higher was added at 0℃, coagulation occurred. In terms of the force efficiency of permanent wave formation, wave efficiency lowered as the concentration increased: the longer the wave lasts, the lower the Polyquaternium-10 concentration. The permanent moisture content was found to be higher as the concentration of Polyquaternium-10 increased. Therefore, when Polyquaternium-10 is applied to the permanent wave-reducing agent, considering stability, permanent formation, durability, and moisture rate, the most suitable concentration was found to be that of Polyquaternium-10 in the cysteine-reducing agent. A novel finding from this study is that as the concentration of Polyquaternium-10 increases, the consistency of the permanent wave-reducing agent changes, shifting from a liquid to a viscous liquid formulation.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.70-75
• /
• 2002

The penetration potential of TIG welding in one single run is limited, though the process itself generates high quality welds with good weld cosmetics. This is one of the main reasons, which has contributed to its development in high duty applications such as those encountered in aeronautical, aerospace, nuclear & power plant applications. For these applications, stainless steels, titanium k nickel based alloys are most often used. As these materials remain very sensible to weld heat input k atmospheric pollution, stringent processing conditions are imposed. For example welding of titanium alloys requires argon shielding of weld zone and for 5 mm thick plates multi-pass runs & filler additions are required. This multi-run operation not only raises the welding cost, but also increases defect risks. In recent years, extensive interest has been raised by the possibility to increase weld penetrations through flux applications & the process is designated ATIG-activated TIG, or FBTIG-flux bounded TIG. The improved welding performance of such flux assisted TIG is related to arc constriction and surface tension effects on weld pool. The research work by authors has lead to the formulation of welding fluxes for stainless steels k titanium alloys with TIG Process. These fluxes are now commercialized & some applications in industry have already been carried out. FBTIG for aluminum has been proposed with silica application for AC mode TIG welding. The paper highlights the fundamentals of flux role in TIG welding and illustrates some industrial applications.

• Journal of Ginseng Culture
• /
• v.6
• /
• pp.80-104
• /
• 2024

Ginseng, a representative medicinal plant of South Korea, is also highly valued in North Korea. However, due to limited access to information about North Korea, the actual cultivation, research and development trends, and related industry status of ginseng in North Korea are not well known. In this study, we aimed to understand the current status and research trends of the ginseng industry in North Korea based on limited available literature. In the North Korean pharmacopoeia, ginseng is referred to as "Koryo ginseng" and is defined as the roots of 6-year-old ginseng cultivated in the Kaesong region. The pharmacopoeia includes 22 types of ginseng preparations. In addition, 10 ginseng preparations are included in North Korea's Essential Drug List, and various health supplements, cosmetics, and toothpastes containing ginseng have been developed, distributed, and sold. Since 2014, the ginseng industry and research in North Korea have become more active overall. During this period, the ginseng cultivation area in Kaesong has been significantly expanded, and the facilities have been renovated. The Kaesong Koryo Ginseng Processing Plant has been equipped with sterilized, modernized facilities since 2016 and has been in operation. Since 2017, there has been a growing interest in quality control research, leading to the introduction of quality management regulations and certification systems in 2019. In the 1990s, there was significant research on ginseng product development, and since the 2000s, studies on the pharmacological effects and clinical research of ginseng have been reported. Additionally, research on ginseng cultivation and ginseng processing industries to increase yield has been emphasized. Ginseng, as a representative medicinal crop of Korea, holds great importance for both South and North Korea. Given its significance and the potential for synergy through mutual cooperation, ginseng serves as an ideal subject for inter-Korean exchange and collaboration.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.765-771
• /
• 2020

Automatic lubrication devices are applied in various fields, such as huge machinery, construction machinery or commercial vehicles, to lower maintenance costs and protect the devices. In addition, the automatic lubrication device reduces frequent component failures cause by friction and allows the machine to replace the lubricating oil replenishment work carried out by the manager. However, the automatic lubricating device used in large machinery or commercial vehicles is relatively large, containing a large amount of lubricant in the space to be lubricated. On the other hand, a smart factory, such as a home appliance or cosmetics factory, lacks space to install large automatic lubrication devices, and it is difficult to distribute electricity. Therefore, there is a need for an automatic lubrication device that can be used in various environments that require lubrication. In this paper, a small automatic lubrication device is proposed for smart factories that have changed parts of existing factories, such as electronics factories, to minimize friction arising from mechanical parts, etc. In particular, the structure of lubricating pumps and component parts that are the core of automatic lubrication devices was described so that they could be utilized in various fields. Finally, a test bed environment is established for the proposed automatic lubrication device to evaluate its performance and verify its applicability.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.1
• /
• pp.9-16
• /
• 2018

Aloe gel layer is well known as raw materials of medicines and cosmetics due to their antioxidant and anti-inflammatory properties. In aloe gel extracting process, the outer part of the leaf was removed. It contains high quality of fiber and many nutrients. However, this part is thrown away and generally used as fertilizer. The purpose of this research was to examine the important nutrient of Aloe saponaria. Moreover, the feasibility of using aloe as a dietary supplement by feeding fermentation treatment of aloe was investigated. To do this, the aloe leaf was divided into several parts including leaf skin, bottom of the leaf, tip of the leaf, middle of the leaf, and leaf flesh. Then the saponin content were analyzed from each part. The extraction method was used to clarify the saponin content. The aloe then fermented to improve it benefit. The fermented Aloe then given as dietary food to group of pig. Finally, the appropriate feed level was determined and the pork meat quality was analyzed. The extraction of saponin shows that the highest concentration of saponin located on the skin of the leaf. The feeding experiment shows that there is no significant difference in pig growth without aloe dietary food and groups with aloe as dietary food. It was conclude that fermented aloe can replace the pigs normal feeder as an alternative feeding solution.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.6
• /
• pp.454-459
• /
• 2015

Background : The major compounds of Angelica species are decursin, decursinol angelate, nodakenin, umbelliferone and ${\beta}$-sitosterol, which act anti-inflammatories, reduce pains, protect the liver and enhance the immune system. This study investigated the chemical compositions, minerals, metals, sugars and overall amino acid composition in Angelica gigas Nakai. Methods and Results : Powder of Angelica roots smaller than 30 mesh were used. Physico-chemical analysis revealed the presence of carbohydrates (62.0%), crude proteins (13.9%), moisture (11.4%), crude fats (7.3%) and ash (5.4%). Results showed that potassium was present in the highest amount (1,859 ppm), followed by magnesium (214.5 ppm), calcium (147.3 ppm) and sodium (6.0 ppm). Free sugar profiles showed the presence of sucrose (29.3 g/100 g). The total amino acids concentrations was 9,752 mg/100 g, the most common and dominant amino acids were arginine (2,181 mg/100 g), glutamic acid (1,212 mg/100 g) and aspartic acid (834 mg/100 g). The total free amino acids contents was 1,476 mg/100 g, in which the most common amino acid were arginine (932 mg/100 g), glutamic acid (127 mg/100 g), and ${\gamma}$-aminobutyric acid (80.4 mg/100 g). The fatty acid composition of A. gigas showed a higher concentration of unsaturated fatty acids such as linoleic acid (443.9 mg/100 g) and palmitic acid (181.3 mg/100 g) according to gas chromatography. Conclusions : These results showed that Angelica roots can be used in various fields of foods and medicines, and in the preparation of cosmetics.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2003.05a
• /
• pp.71-92
• /
• 2003

Specialty stores, which have been major channels of Korean cosmetic industry, are bringing out a lot of problems in current distribution channel systems because of its repeated depression of sales. Especially, inefficiency in distribution channel systems is caused by cannibalistic price-off competition between specialty stores, too many launchings of new products, excessive sales promotion, absence or surplus of stock, and so on. Using qualitative methods such as in-depth interview and group discussion, the authors attempt In diagnose fundamental problems of the cosmetic specialty store distribution channels in three viewpoints； achievement of goals, marketing flows in channels, and relationship management. In addition, this paper suggests core strategies for building up the competitiveness of both of the maker and the retailer, The competitive strategies are mainly about securing profitability of retailers, smoothening of marketing flows in channels, and building-up trustful relationships between distribution channel members.

• Journal of Applied Biological Chemistry
• /
• v.54 no.1
• /
• pp.33-40
• /
• 2011

Ionizing radiation can be used to improve the color of green tea extract to brighter. As a result, the irradiated green tea extract can be applied easier and broader in food or cosmetic industry. To confirm the retention of the biological activities of the cosmetic products added with green tea polyphenols (PPs), the real cosmetic products including a skin lotion (PS) and an essence (PE) cream were manufactured. Irradiation also applied to the manufactured cosmetic products to see their improvement of color and changes of biological activity. The PP showed 72% of electron donating ability (EDA) at a 5 ppm concentration and the PS and PE containing 2% PP showed higher than 60%, which was similar inhibition activity to vitamin C. The inhibition of superoxide dismutase (SOD)-like activity of PP, PS, and PE were higher than 55% at a 500 ppm concentration and the inhibition of xanthine oxidase (XOase) were also higher than 65% at a 200 ppm concentration. The measurement of lipid oxidation by addition of $Cu^{2+}$ and $Fe^{2+}$ as prooxidants showed that PP and PS had higher metal chelating ability for $Fe^{2+}$ than that of PE and the ability increased by increase of polyphenol concentration isolated from green tea. The $Cu^{2+}$ chelating ability of PP and PS showed higher than 90% at a 200 ppm concentration. Therefore, it is concluded that addition of PP in manufacturing PS and PE retains its biological activities including EDA, inhibition of XOase and SOD-like activity, and metal chelating ability in the manufactured cosmetic products. In addition, irradiation of PS and PE improved color of the products containing PP brighter without any adverse changes in biological activity of the products.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.78
• /
• pp.119-143
• /
• 2018

This research aims to review every important academic research on risk management in FTA and to suggest a future area for further research. This research area seems to focus on conceptual study or fact finding rather than on theory development or empirical research on causal relationship or theory testing. The National Assembly Digital Library analyzed the results of 3,576 researches on thesis and journals fromthe results of the FTA. Research on FTA is analyzed in four major themes. First, there have been previous studies on business performance such as FTA export performance and economic effect. Second, analyzed the effects of FTA in product and service. The products are classified into agricultural, marine products, manufacturing, textiles and clothing, medicinal pharmaceuticals, cosmetics, and others. Services are classified into educational and cultural contents, service industry and financial industry. Third, research on the risk management of FTA Origin is broadly classified into the use of country of origin and the verification of origin, and the use of origin includes the study of rules of origin and systems of origin and management. Origin verification was divided into origin verification and origin risk management. Fourth, study on the conclusion area of the FTA, studies were conducted on areas such as Korea-US FTA, Korea-China FTA, Korea-EU FTA, Korea-Japan FTA, Korea-Chile FTA, and Korea-ASEAN FTA. Search results through the FTA, focused on analyzing the FTA area and concept research by research purpose. In addition, research methods are mainly focused on documentary survey, and research areas are concentrated on specific countries such as China and USA. This implies a necessity for a future development in that research area. Other areas for future research may include case research on actual failures in FTA, proactive risk management strategy, and integrated risk management for export companies. Risk management in FTA may help investment expansion, and that is why research on the issue matters.

• Journal of Plant Biotechnology
• /
• v.42 no.1
• /
• pp.55-59
• /
• 2015

The extracts of Aruncus dioicus were investigated for anti-oxidant and biological activities in order to verify its potential as functional ingredients of cosmetic products. The ethyl acetate (EtOAc) extract of A. dioicus showed excellent scavenging activity using DPPH and ABTS anti-oxidant analysis at the $1,000{\mu}g/mL$ concentration. While tyrosinase inhibitory effect was measure for whitening assay and showed 59.2%, the suppression levels of elastase and collagenase were 56% and 90% respectively for anti-wrinkle activity. Therefore, it is plausible to conclude that A. dioicus extract, especially EtOAc fraction which has outstanding whitening, anti-oxidant, and anti-wrinkle activities, could be used as a new functional materials for cosmetics.