• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.6
• /
• pp.485-494
• /
• 2013

This paper deals with experimental evaluation methods for high speed judder on the brake-caliper system. Firstly, two types of brake caliper systems due to the wheel vibration was evaluated. Secondly, the high-speed judder of the brake was also investigated using the subjective rating evaluation in the high-speed road test. These experimental evaluations were carried out by changing the materials of brake pad and the specifications of the brake-corner module. Based upon the test results, a new specification of the brake pad, $15{\times}5$ vertical chamfer, was proposed. The new brake pad showed 3 points, 60 %, improvement in the subjective-rating evaluation comparing with conventional one. Besides, we need to decide properly with judder characteristic of pad material and have to carefully take into consideration other design parameters; caliper, disc, and the braking performance, durability, squeal noise.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1738-1741
• /
• 1997

This paper addresses the issue fo target classification and localization with a SONAR for mobiler robot indoor navigation. In particular, multiple refetions of SONAR sound are used actively and interntionally. As for the SONAR sensor, the multiple reflection has been generally considered as one of the noisy phenomena, which is inevitable in the indoor environments. However, these multiple reflections can be a clue for classifying and localizing targets in the indoor environment if those can be controlled and used well. This paper develops a new SONAR sensor module with a reflection plane which can actively create the multiple refection. This paper also intends to suggest a new target classification emthod which uses the multiple refectiions. We approximate the world as being two dimensional and assume that the targets consisting of the indoor environment are pland, corner, and edge. Multiple reflection paths of an acoustic bean by a SONAR are analyzed, by simulations and the patterns of the TOPs (Time Of Flight) and angles of multiple reflections from each target are also analyzed. In addition, a new algorithm for target classification and localization is proposed.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.9
• /
• pp.28-43
• /
• 1999

In this paper, we present a gridless router for MultiChip Modules (MCM). Because our router uses corner stitching data structures, not a routing grid, to represent the routings status, it allows arbitrary location of pins, and routes variable-width wires, without a considerable waste of area from bulky vias. A routing speed is a very important factor because a gridless routing approach is known its computation is hard and complex, and MCM routing problem has so large routing area and layers. Our router completes the routing faster than the most of previously reported grid-based routers, with comparable routing result, by using SEGRAs routing algorithm whose very fast speed is proved, and the characteristics of the effective data structure.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.4
• /
• pp.71-78
• /
• 2020

The rotary feed axes of a 5-axis machine tool can increase the freedom of the tool posture, while reducing feed speed and rigidity. In addition, as a ball-end mill is inevitably used during machining by rotational feed, the step-over length is reduced compared to the flat-end mill, thereby reducing the material removal rate. Therefore, this study attempts to improve the material removal rate, feed speed, and machining stability using the corner radius flat-end mill and a fixed controlled machining method for the rotary feed axes during roughing. In addition, the tapered ball-end mill and simultaneously controlled machining method for the rotary feed axes were used for finishing to improve the propeller's 5-axis machining efficiency by enhancing the surface quality. In order to create the tool path effectively and easily, we propose a specific approach for using the propeller's geometric properties and evaluate the effectiveness of the proposed method by comparing it with the method of the dedicated module.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.3
• /
• pp.63-70
• /
• 2020

Two rotational motions of the 5-axis machine tool maximize the degree of freedom of the tool axis vector, which improves tool accessibility; however, this lowers feed speed and rigidity, which impairs machining stability. In addition, cutting efficiency is lowered when compared with a flat end mill because typically, the ball-end mill is used when machining by rotational motion. This study increased cutting efficiency by using a corner radius flat end mill during impeller roughing. Furthermore, we proposed a fixed controlled machining of the rotary motion using geometric shape information to improve the feed speed and machining stability. Finally, we proposed a finishing tool path generation method using a vector net to increase the convenience and practicality of tool path generation. To verify its effectiveness, we compared the machining time, shape accuracy, and surface quality of the proposed method and an existing dedicated module.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.546-552
• /
• 2012

This paper is a study on squeal noise simulation under the consideration of temperature and pressure dependent material properties of friction material. For this, data of pressure and temperature dependent material properties of lining is achieved by using lining data base and exponential curve fit. Complex eigenvalue analysis is performed for predicting squeal noise frequency and instability and chassis dynamo test is performed for achieving squeal noise frequency, sound pressure level, occurrence temperature & pressure. Initial multi models are composed for considering complex interface conditions such as pad ear-clip, piston-housing and guide pin-torque member. The simulation result of base models is compared with the test result. Squeal noise simulation under the consideration of temperature and pressure dependent material properties of friction material is performed and analyzed using multi models. And additional condition is disc material property variation. Entire simulation conditions are combined and analyzed. Finally, this paper proposes direction of the warm squeal noise model.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.124-133
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the development of compact and practical CAB system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer. Based on knowledge-based rules, the system, STRT-DES, is designed by considering several factors, such as complexities of blank geometry and punch profile, availability of press equipment and standard parts, utilization ratio which minimizes the scrap in a single or a pairwise operation, bridge width, grain orientation and design requirements which maximize the strength of the part when subsequent bending is involved. This system checks a forming feasibility with both internal and external features, a dimension of blanked hole, and a corner and a fillet radius for irregualrly shaped sheet metal products. Therefore this system can carry out a die design for each process which is obtained from results of an automated blank layout drawing with a best utilization ratio for irregular shape of product that was successful in production feasibility check module and those of an automated strip layout drawing and generate part drawings and the assembly drawing of die set in graphic forms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2489-2496
• /
• 2014

The existing ship repair tool management system based on hand writing has many problems such as frequent loss of tool and overdue. To solve this problem, same systems have adopted the bar-code system. However, the systems can't cope with a problem to substitute spurious tool for genuine one on bar-code damage. Therefore, additional validation steps are necessary in order to manage expensive ship repair tool. In this paper, we propose an image comparison method for ship repair tool management. To be more concrete, we propose a normalization method and determination conditions for image comparison to use characteristics of mobile device. The normalization method makes use of the characteristics of mobile device that provides functions of real time recording, overlapping and cropping images. The proposed method applies three conditions(sum of inner angles, size of angle, position of corner coordinates) into the comparison module. The implemented system shows good performance on change direction, lighting, size and etc. The accuracy is more than 95%.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.2
• /
• pp.21-28
• /
• 2022

Focusing on the creation of a new han ok, especially a mid-rise hybrid-structured Han-ok, this study proposes a middle-rise (four-story) Han-ok on one and two lots located in Seoun-dong, the existing Han-ok intensive housing site in downtown Cheongju. 1) In terms of layout and function, according to the existing L-shaped Han-ok corresponding to the road and the direction, the parking lots and shops on the 1st floor, the business facility on the 2nd floor, the Han-ok on the 3rd and 4th floors are placed. There are yards, open roof yards, and semi-open Daecheong(大廳, main hall), which can be shared by residents. 2) In terms of structure and form, one or two floors (some 3 floors) are 5.4m square and 5.4×6.6m modules of the RC(Reinforced Concrete) group, and the upper floor reflects the 2.7m module, size and shape of the existing Han-ok. By extending the outer wall of the RC group in the lower floors (1st to 3rd floors) to the wooden exterior of the upper floors (2nd to 4th floors), it is attempted to avoid the awkward appearance of the RC group being exposed to wooden structures. And it is also attempted to reflect the wooden shape and design elements through the elevation elements such as horizontal windows, corner windows, picture frames, and vertical slits. 3) In environmental control and facilities, it is attempted to smooth the ventilation of the building by forming a vertical upward airflow from the dark space of the low floor to the positive of the upper floor. This doubles the effect through a vertical rise of cold air generated in a narrow alleyway, piloti parking lot, and the various voids. In addition to the Daecheong and Numaru(loft) of Han ok, the rooftop yard, the terrace, and the balcony, horizontal natural ventilation is generated through divided doors and transom windows.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2000.05a
• /
• pp.261-266
• /
• 2000

글을 이해하기 위해서는 어휘와 어휘간의 연결 및 전체 구조를 아는 것이 필요하다. 이는 비단 한국어뿐만 아니라 영어나 기타 다른 외국어에서도 마찬가지일 것이다. 본고는 두 가지를 고찰하기 위해 진행되었는데 우선 외국어로서 영어를 처리하는데 발생하는 구문적 중의성을 해결하는데 Garden Path Sentence(GPS), Late Closure(LC), PP의 세 문형에 따라 어떻게 해결하는지 알아보기 위한 것이다. 그리고 각 문형의 중의적 어절에서의 반응과 애매성 해소 어절에서의 반응에 따라 sysntactic module이 작용하는 것인지 알아보고자 한다. 예를 들어 "The boat floated down the streams sank"란 Garden Path 문장이 제시된 경우에 독자는 "sank"란 어휘가 제시되기 전까지 "floated"를 동사로 생각하게 되나 다음에 본동사인 "sank"가 제시될 경우 문장의 해석에 혼란을 갖게 될 것이다. 예문에서 "floated"가 문장에서 어떤 역할을 하는지 결정하는 것은 "sank"를 보고서야 가능하다. 이런 구문적 중의성을 해결하는 방식을 알아보기 위해 어절 단위로 제시된 자극을 읽는 자기 조절 읽기 과제(self-paced reading task)를 사용하였다. 각 어절을 읽는데 걸리는 시간을 측정한 실험 결과 GPS, PP, LC 모두 중의성을 지닌 영역이 중의성을 해소한 후와 각각 유형적으로 큰 차이가 없는 것으로 나타났다. 다만 GPS, CGPS, PP와 CPP는 어절 후반으로 갈수록 반응시간이 짧아졌다. 이는 우리나라 사람의 경우 외국어인 영어의 구문 중의성 해소는 구문 분석 단원(syntactic module)에 의한 자동적 처리라기보다 의미를 고려해 가면서 문법지식을 이용해 추론을 통한 구문 분석이라 할 수 있다.에 의한 자동적 처리라기보다 의미를 고려해 가면서 문법지식을 이용해 추론을 통한 구문 분석이라 할 수 있다.많았다(P<0.05).조군인 Group 1에서보다 높은 수준으로 발현되었다. 하지만 $12.5{\;}\mu\textrm{g}/ml$의 T. denticola sonicated 추출물로 전처리한 Group 3에서는 IL-2와 IL-4의 수준이 유의성있게 억제되어 발현되었다 (p < 0.05). 이러한 결과를 통하여 T. denticola에서 추출된 면역억제 단백질이 Th1과 Th2의 cytokine 분비 기능을 억제하는 것으로 확인 되었으며 이 기전이 감염 근관에서 발견되는 T. denticola의 치수 및 치근단 질환에 대한 병인기전과 관련이 있는 것으로 사료된다.을 보였다. 본 실험 결과, $Depulpin^{\circledR}은{\;}Tempcanal^{\circledR}와{\;}Vitapex^{\circledR}$에 비해 높은 세포 독성을 보여주공 있으나, 좀 더 많은 임상적 검증이 필요할 것으로 사료된다.중요한 역할을 하는 것으로 추론할 수 있다.근관벽을 처리하는 것이 필요하다고 사료된다.크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에 증착된 막의 업자 크기가 작을 수록 클 것으로 여겨진다. 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하게 경계