• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.789-792
• /
• 2003

Pipe inspection has a great importance to ensure safety for the nuclear power plant. In this paper, we designed visual inspection module for the tube internal, which diameter is 15${\sim}$20mm. And we made inspection module which consisted of CCD camera and light. And the relation between image and real world coordinate is established. Image processing is performed to calculate mapping parameter and analyze the size of defect. For the calculation of mapping parameter, experiment is performed using grid type test pattern. Acquired image is processed to extract image coordinate. Edge detection, thresholding, median filtering and morphology filtering is applied to extract grid pattern. Extracted image coordinate is used to calculate image to real world mapping. Lens distortion was considered and corrected to get exact data. Coordinate transformation data is provided for the users to recognize easily. Experiment was performed using grid type test pattern, we extracted lens distortion parameter and real coordinate of defect point. Radial distortion of lens was corrected but tangential distortion was not considered. As continuum to this study, the tangential distortion of lens is considered and improvement of analy zing technique for the tube internal be explored continuously.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.150-150
• /
• 2000

We as modal parameter estimation technique by developing a residual based system reconstruction and using the system matrix coordinate transformation. The modal parameters can be estimated from and residues of the system transfer functions expressed in modal coordinate basis, derived from the state space system matrices. However, for modal parameter estimation of multivariable and order structural systems over broad frequency bands, this non-iterative algorithm gives high accuracy in the natural fre- and damping ratios. From vibration tests on cross-ply and angle-ply composite laminates, the natural frequencies and damping ratios on be estimated using tile coordinates of the structural system reconstructed fro the experimental frequency response. These results are compared with those of finite element analysis and single-degree-of-freedom curve-fitting.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.527-527
• /
• 2000

Wean modal parameter estiimation technique by developing a residual based system reconstruction and using the system matrix coordinate transformation. The modal parameters can be estimated from and residues of the system transfer functions expressed in modal coordinate basis, derived from the state space system matrices. However, for modal parameter estimation of mllltivariable and order structural systems over broad frequency bands, this non-iterative algorithm gives high accuracy in the natural fre and damping ratios. From vibration tests on cross-ply and angle-ply composite laminates, the natural frequencies and damping ratios can be estimated using the coordinates of the structural system reconstructed from the experimental frequency response. These results are compared with those of finite element analysis and single-degree-of-freedom curve-fitting..

• The Pure and Applied Mathematics
• /
• v.30 no.4
• /
• pp.347-355
• /
• 2023

For numerical evaluation of Cauchy principal value integrals, we present a simple rational function with a parameter satisfying some reasonable conditions. The proposed rational function is employed in coordinate transformation for accelerating the accuracy of the Gauss quadrature rule. The efficiency of the proposed rational transformation method is demonstrated by the numerical result of a selected test example.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1211-1214
• /
• 1993

In this paper, we present a fuzzy-number-oriented methodology to model uncertain geometric robot environment and to manipulate geometric uncertainty between robot coordinate frames. We describe any geometric primitive of robot environment as a parameter vector in parameter space. Not only ill-known values of the parameterized geometric primitive but the uncertain quantities of coordinate transformation are represented by means of fuzzy numbers restricted to appropriate membership functions. For consistent interpretation about geometric primitives between different coordinate frames, we manipulate these uncertain quantities using fuzzy arithmetic.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1209-1217
• /
• 1994

This paper proposed transformation coefficients suitable to South Korea for the establishment of coordinate transformation system between Bessel and WGS84 ellipsoids. For this, the coordinates transformation algorithms concerned with parameter methods was developed, and global test network which has 15 astronomical points in South Korea were designed. Based on signals received from GPS, computed the geoid undulation by GPS/Leveling, and derived parameters(3-, 4-, 6-, and 7-parameter) for transformation between each ellipsoid, applied global networks to study the characteristics of transformation according to parameters. Through the successful application of 7-parameters derived in this study and 7-parameters proposed by DMA for map projection, transformation coefficients suitable to South Korea was proposed.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.83-92
• /
• 2003

The previous control point surveying, being standardized by trigonometric point which hasn't been unified in the whole country and producing put into operation through complex calculation process, has many problems about accurate results and economic side. Because most of trigonometric points that standardize a present surveying are in situation in top of the mountain, there are many difficulties in solving sight problems. Since trigonometric points are far away from one another, Differences are created because of limitation of point distance, observatory network construction and distribution of error. In the information age, the study about acquiring three dimension surveying information that uses GPS has been processed as fast as acquiring topography information is getting important gradually. For utilizing GPS in surveying work, deciding transformation 7-Parameters that changes data about location information which is received by GPS receiver is important. In this study, it is decided transformation 7-Parameters that can be used in ka-pyoung area by using GPS surveying production that had put into operation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.29-39
• /
• 1997

The need of transformation parameters from local geodetic datums to a geocentric coordinate system is becoming more common, with the increasing application of satellite positioning techniques to LIS/GIS survey with cadastral management. In this paper, the national transformation parameters between the Korean geodetic coordinates which is based on the Bessel 1841 ellipsoid and the WGS84 ellipsoid are determined by the least square methods with weighted parameter constraints. Three-dimensional geocentric coordinates are based on GPS observation at 31 stations in the geodetic network, the datum parameters are computed within a standard deviation of less than 1 meter. In South Korea, the national transformation parameters with Bessel geoid-heights are useful for GPS baseline processing and for middle-scale map/database transformation.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.59-63
• /
• 2007

Each country uses its own datum which well represent its topography. The uses of the space technology such as GPS and the effort of establishing the consistent data over the world, Korea changed the survey act to use a world geodetic system from January 1, 2007. In this study, spatial analysis carried out to transform the GIS DB of electric power distribution system based on the old Tokyo datum the new world geodetic system, KGD 2002. Based on the study, problems on the transformation had been identified and efficient solutions are suggested. The data used for the 7 parameter similarity transformation in this study is the blueprints of the electric equipment and base maps. It is expected that this study provide general scheme and procedure for efficient GIS DB transformation to the new world geodetic system.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.79-85
• /
• 2008

This study aims to derive a practical coordinate transformation method for the existing geographic information database. After analyzing the status and problems of existing 1/1,000 digital base map and GIS application database, the transformation parameters are estimated and the accuracy of the transformation is determined based on the transformed coordinates. We analyzed the accuracy of a transformation using the published national transformation coefficients as well as the estimated local transformation coefficients using national and urban control points in a study area. In addition, the 1/1,000 digital base map from aerial triangulation is compared with respect to the coordinates of urban control points. Based on the comparison, the biases on the national control points which were used at the time of digital map generation was analyzed. Then, the accuracy of transformed coordinates based on the world geodetic system using local transformation coefficients estimated from urban control points are determined. We also analyzed the transformation accuracy of underground infrastructure database using the same transformation method as the case of 1/1,000 digital base map. Through this study, it was found that the estimation of transformation coefficients by Molodensky-Badekas using urban control points was suitable for a local government. Furthermore, it was obvious that the accuracy of a 2-dimensional affine transformation was comparable to that of 7 parameter transformation for a local area. Applying the coordinate transformation and bias correction, we could transform GIS application database which was built by an offset surveying based on digital base map within the transformation accuracy of 10 cm. Therefore, it was judged that there will not be a big problem on the transformation of the GIS DB to the world geodetic system.