• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1722-1727
• /
• 1992

In this study, techniques of adaptive input-output linearizing control of a class of uncertain nonlinear system are investigated. It is shown through concepts of signal growth rates that bounded trackings yield by adaptive input-output linearizing control law using normalized estimator. The convergence characteristics are improved significantly by using the normalized estimator. Simple example is presented as illustration.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1333-1339
• /
• 2023

To produce activated carbon fibers, the process is carried out through either physical activation method or chemical activation method. In this study, we present the results regarding the characteristics of activated carbon fibers manufactured under various conditions through the quantitative control of steam. The yield after activation indicates a decreasing trend with the increase in steam quantity and activation time. Additionally, specific surface area characteristics exhibit variations based on activation time and steam flow rate. The SEM analysis results reveal that higher steam flow rates lead to the presence of both mesopores and macropores on the surface of activated carbon fibers (ACF).

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1901-1906
• /
• 1995

The frequency response functions of systems incorporating a non-linear cubic stiffness subject to sinusoidal excitation are derived using the Volterra series and the convergence characteristics investigated. It is shown that the series representation of the frequency response functions converges only when the sinewave input amplitude is within a certain range. Within the range of convergence the frequency response function based on the Volterra series approaches the analytical one as more higher order frequency response function terms are included. Proposed is a criterion for the studies systems to predict approximately the range of sinewave input amplitude for which the series representation of the frequency response functions converges.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.263-270
• /
• 2012

Modern society, the era of convergence can be And mobile convergence era as the sudden transformation of a mobile communication terminal industry. Smartphone users increasingly rapidly and the new role and value of smart phones is increasing in all walks of life, the impact of knowledge and information society, to accelerate the more recent case of Korea, determined to become more. In this study, look to the Chinese and the characteristics of smartphone customer satisfaction, repurchase intentions affect the relationship between the foundation of marketing strategy in the future to become. The results of this study can be summarized smart phone's aesthetic characteristics, functional characteristics, and purchase characteristics that affect customer satisfaction was For smart phones as well as customer satisfaction has a positive effect on repurchase.

• Journal of the Korean Society of Costume
• /
• v.57 no.3 s.112
• /
• pp.23-36
• /
• 2007

It is important that ubiquitous technology changes paradigm of thought, not simple definition in the 21st digital era. Characteristics of ubiquitous computing are pervasive, disappearing, invisible, calm through environment. As IT Technology develops, designers, computer scientists, chemists, performance artists cooperate in order to find out the best way to make desirable digital clothing in the future, with the merit of each part. Digital clothing defines clothes of new generation equipped computer, digital installations. Digital clothing design demands intercept of electromagnetic waves, light-weight and esthetic appearance, for it is attached high-technology equipment near body. The purpose of this study is to analyze design features of digital clothing according to ubiquitous characteristics. The methods of this study are documentary research of previous study and case study. In the theoretical study, ubiquitous characteristics are function-intensive by convergence, interactivity, embedded mobility and human & emotion-oriented attributes. Based on ubiquitous characteristics, digital clothing design classified function-intensive design by convergence, design for Interactivity and multi-sensible & emotion-oriented design, because embedded mobility is a basic element of ubiquitous environment. The early days digital clothing design is function-intensive design, and have esthetic appearances and design for interactivity increasingly. Recently digital clothing design is expressed multi-sensible and emotion-oriented design.

• Food Science of Animal Resources
• /
• v.35 no.1
• /
• pp.27-34
• /
• 2015

The ultrastructure in the beef muscle of the electro-magnetic resonance and air blast freezing during the frozen storage, and the changes in the quality characteristics after thawing were evaluated. The size of ice crystal was small and evenly formed in the initial freezing period, and it showed that the size was increased as the storage period was elapsed (p<0.05). The beef stored by the electro-magnetic resonance freezing showed the size of ice crystal with a lower rate of increase than the air blast freezing during the frozen storage. The thawing loss of beef stored by the electro-magnetic resonance freezing was significantly lower than the air blast freezing during frozen storage (p<0.05), and it showed that the thawing loss of the round was higher than the loin. Water holding capacity decreased as the storage period became longer while the electro-magnetic resonance freezing was higher than the air blast on 8 month (p<0.05). As a result of sensory evaluation, the beef stored by the electro-magnetic resonance freezing did not show the difference until 4 months, and it showed higher acceptability in comparison with the beef stored by the air blast freezing. Thus, it is considered that the freezing method has an effect on the change in the ultrastructure and quality characteristics of the beef.

• Journal of the Korea Convergence Society
• /
• v.9 no.2
• /
• pp.313-322
• /
• 2018

This study categorized the kidult culture into three: cutiesm kidult, fantasm kidult and memorism kidult and analysed each type of kidult culture for the design. To obtain data on characteristics of kidult and gel nail art techniques, the study searched for theses, technical books and Internet data and developed unique and creative convergence nail art designs based on the results. As a result, it was discovered that cutiesm kidult is characterized by cuteness, brightness and use of characters, fantasm kidult is characterized by value of imagination and fantasy, and memorism kidult is characterized by memories of the past and use of characters. Then using the characteristics of kidult according to types, this study made 6 nail art designs through which creative and unique characteristics of the kidult culture were expressed in nail art design.

• Journal of radiological science and technology
• /
• v.42 no.4
• /
• pp.291-299
• /
• 2019

The International Electrotechnical Commission (IEC) has regulated the definition and requirements of the exposure index (EI). In this study, we calculated the EI of several image receptors in digital radiography system of two different manufacturers according to the method as per IEC, and evaluated the relationship with incident air kerma. To calculate the EI, w e obtained the characteristics curve of each image receptor by increasing the incident air kerma at RQA 3, 5, 7 and 9, respectively. As a result, there was no significant difference in the EI values between different image receptors of the same manufacturer, but EI values of different manufacturer was different despite the same air kerma was incident. Therefore, understanding the characteristics of the digital radiography systems is important in order to use EI as a tool for measuring and managing the radiation dose.

• Journal of the Korean Society of Costume
• /
• v.65 no.2
• /
• pp.33-47
• /
• 2015

The purpose of this study is to understand the ideas of characteristic of convergence design related to slow fashion design. Convergence design in digital stage can be defined as a social phenomenon which different function of product move toward one direction for greater efficiency. Slow fashion is based on the Slow Movement. (This is a movement with similar principles to the Slow Food Movement, as it promotes an alternative mass production, such as fast fashion.) The aims of this research are to study slow fashion that has appeared in the fashion industry through various approaches for convergence designs, and to find the possibility of use for slow fashion. The research method consisted of carrying out case studies and analyzing literatures and proceeding cases. The characteristics of convergence designs are classified into technical convergence, emotion-oriented convergence and complex convergence. Technical convergence has an effect on slow fashion as a multi-functional design. Second, emotion-oriented convergence affects social-cultural design. Slow fashion related to a complex convergence design reveals emotion-oriented deign. Slow fashion is related to convergence design is to expect contribute to provide a good source for the future fashion industry and fashion market.

• Journal of the Korean Ceramic Society
• /
• v.52 no.1
• /
• pp.23-27
• /
• 2015

Recently, the use of ion-exchange strengthened glass has increased sharply, as it is now used as the cover glass for smart phone devices. Therefore, many researchers are focusing on methods that can be used to strengthen ion-exchange glass. However, research on how the improved strength can be maintained under thermal environment of device manufacturing is still insufficient. We tested the degradation of the characteristics of ion-exchange soda-lime glass samples, including their surface compressive stress characteristics, the depth of the ion-exchange layer (DOL), flexural strength, hardness, and modulus of rupture (MOR) values. Degradation of the characteristics of the ion-exchange glass samples occurred when they were heat-treated at a temperature that exceeded $350^{\circ}C$.