• 전기화학회지
• /
• 제8권3호
• /
• pp.139-145
• /
• 2005

전자싸이크로트론공명(ECR: Electro Cyclotron Resonance)상온화학증착법에 의해 PET 폴리머기판위에 $SnO_x$ 박막을 제조하고, Sn의 전구체인 TMT(Tetra-methyl Tin)에 대한 산소와 수소의 몰 비 변화가 박막의 특성에 미치는 영향을 조사하였다 비화학양론적인 결합에 의해 성장된 투명 주석 산화막은 주입되는 산소/TMT, 수소/TMT몰 비에 의하여 조성비가 결정되고, 결정된 조성비에 의해 전기적 성질이 결정되는 것을 확인할 수 있었다. 산소/TMT의 몰 비 변화에 대하여 PET(polyethylene terephthalate)에 증착된 $SnO_x$ 박막의 최적 조성비는 1:2.4이다. 조성비는 반응에 참가하는 산소의 양이 증가할수록 점차적으로 증가하고, 과량의 몰 비로 산소가 주입될 경우 박막내의 Sn과 결합하지 않고 잉여 산소전하밀도를 증가시켜 bulk한 박막을 형성해 전기 비저항을 증가시키는 주요 원인이 된다. 수소/TMT의 몰 비는 산소 몰 비와 같이 증착되는 $SnO_x$의 몰 비에 영향을 주어 조성비를 변화시킴으로서 전기비저항을 결정하는데 크게 기여한다. 반응기내에 공급되는 수소량이 적으면 TMT의 불완전한 분해를 초래하여 반응에 필요한 $Sn^+$ 이온농도가 낮아지게 되고,상대적으로 잉여 산소함량이 증가하면서 높은 저항을 나타낸다. 임계값 이상으로 많은 양의 수소를 공급하면 플라즈마 내에 존재하는 $O^-$ 이온을 환원시켜 주석 산화막의 형성에 필요한 $O^-$ 이온의 감소로 전기저항이 오히려 증가하게 된다. 따라서 박막의 Sn:O의 조성비는 주입되는 산소량이 증가할수록 더욱 큰 값을 갖게 되고, 주입되는 수소량이 증가할수록 작은 값을 갖게 된다. 본 연구범위에서 TMP에 대한 산소의 몰 비는 80배, 수소의 몰 비는 40배일 때 가장 투명도와 전기전도도를 지니는 박막 특성을 나타내었다.

• 자원환경지질
• /
• 제54권2호
• /
• pp.285-297
• /
• 2021

전세계적으로 해체 대상 원자력 시설이 증가하고 있으며, 이러한 원자력 시설을 해체하게 되면 수십만 톤의 콘크리트, 토양, 금속 등의 폐기물이 발생한다. 따라서 고상 방사성 폐기물 감용 및 재활용 기술에 대한 기존 연구를 면밀히 검토할 필요가 있다. 폐콘크리트 미분말은 소성 및 분쇄와 같은 추가적인 공정을 통하여 재수화 반응이 일어나며, 시멘트 수화 반응 및 고화체 압축강도에 영향을 미치는 주요 화합물인 aluminate (C3A), C4AF, C3S, ��-C2S가 생성된다. 기존 연구를 통하여 폐콘크리트 미분말을 재생 시멘트로 재활용할 수 있음을 확인하였으나, 골재의 혼입으로 인한 고화체의 강도 저하와 같은 문제점에 대한 해결방안은 현재까지 연구되지 않았다. 이러한 문제점을 보완하기 위하여 산업부산물인 고로슬래그, 비산회를 성분 조정재로 혼합하여 재생 시멘트의 성능을 증진시키는 연구가 수행되었으며, 고화체의 압축강도가 증진되는 것을 확인하였다. 그러나, 폐토양을 재활용한 비소성 시멘트의 제조에 대한 연구는 많이 수행되지 않았다. 폐토양 내 함유된 일라이트와 제올라이트는 방사성 핵종에 대한 흡착능이 우수하며, 이를 고화재로 재활용하면 원전 해체 폐기물의 부피를 저감함과 동시에 방사성 폐기물을 안전하게 담지할 수 있는 효과를 도출할 수 있다. 이러한 이유에서 폐토양 내 점토 광물을 이용한 비소성 시멘트의 제조에 대한 연구가 필요하다. 본 연구에서는 기존에 수행된 국내외 연구를 통하여 원전 해체 폐기물인 콘크리트의 재생 시멘트로서 재활용 가능성 및 개선 방안과 더불어 폐토양 내 점토 광물을 이용한 비소성 시멘트 제조에 대한 연구 필요성에 대하여 고찰하였다.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• 한국광물학회지
• /
• 제21권3호
• /
• pp.227-237
• /
• 2008

최근 들어 비소오염에 대한 환경적 관심이 증대되면서, 세계적으로 비소에 대한 음용수 기준이 강화되고 있으며, 국내적으로도 비소로 오열된 지하수 덴 토양의 출현 빈도가 높아지면서 비소 오염과 그에 대한 처리 및 대책이 주요한 환경적 관심사로 대두되고 있다. 지중에서 비소의 거동은 주로 산화물들과 점토광물에 의하여 제어되는데, 특히 철(산)수산화물이 가장 효과적으로 비소를 제어하는 것으로 알려져 있다. 이에 본 연구에서는 다양한 철(산)수산화물들 중 2-line ferrihydrite가 비소의 거동에 어떠한 영향을 미치는가를 파악하기 위하여 수행되어졌다. 다양한 비소 화학종들 중 자연 상에서 발현 빈도수가 가장 큰 3가 비소(아비산염)와 5가 비소(비산염)가 2-line ferrihydritc와 어떠한 흡착 특성을 갖는지 비교하여 연구하였다. 비소의 흡착제로 실험실에서 제조되어 이용된 2-line ferrihydrite는 $10\sim200nm$의 작은 나노 크기, $247m^{2}/g$의 비교적 큰 비표면적, 다른 철(산)수산화물보다 높은 8.2의 영전하 pH 등을 갖는 것으로 나타났는데, 이러한 2-line ferrihydrite의 대표적인 물리화학적인 특성들은 비소의 흡착제로서 매우 적합한 것으로 조사되었다. 평형흡착 실험결과, 3가 비소가 5가 비소보다 월등히 높은 흡착력을 보였으며, 3가 비소는 pH 7.0, 5가 비소는 pH 2.0에서 가장 놀은 흡착력을 보이는 것으로 나타났다. 3가 비소는 pH 12.2를 제외하고는 pH에 따른 흡착량이 크게 차이를 보이지 않은 반면, 5가 비소는 pH가 증가함에 따라 흡착량이 현격하게 갈소하는 것으로 나타났다. pH에 따른 비소의 흡착특성을 보다 더 자세하게 초찰한 견과, 3가 비소는 pH 8.0까지는 흡착량이 증가하다가 pH 9.2 이상에서는 흡착량이 급격하게 같소하는 것으포 나타났다. 5가 비소의 경우에는 pH가 증가할 수록 비교적 일정하게 흡착량이 갉소하는 것을 알 수 있었다. 이렇게 비소 화학종에 따라서 상이한 흡착특성을 보이는 이유는 pH에 따른 각 비소 화학종의 화학져 존재 형태(chemical speciation)와 2-line ferrihydrite의 표면전하의 변화 등이 복합적으로 작용하기 때문인 것으로 사료된다. 각 비소 화학종과 2-line ferrihyite와의 흡착특성을 반응속도론적 관점에서 고찰한 결과, 대부분의 비소종들이 2시간 이내에 흡착이 거의 완료되는 것으로 나타났으며, 두 종류의 비소 화학종과 2-line ferrihydrite의 흡착 반응속도를 가장 잘 모사하는 반응속도 모댁은 power function과 elovich model인 것으로 조사되었다.

• 방사성폐기물학회지
• /
• 제8권4호
• /
• pp.319-327
• /
• 2010

공학적 안전설비 공기정화계통과 관련된 실험 수행을 위해 원자력등급 ESF 공기정화계통 시뮬레이터를 설계, 제작, 검증하였다. 영광 5,6호기 주제어실 공기정화계통의 공급자 정보, 도면 등을 기준으로 실사를 통해 치수를 확인하여 3D CAD 모델을 작성하였다. 모델과 현장 계통의 실측 유량을 기준으로 CFD 분석을 수행하였다. 공기정화계통으로 유입되는 공기는 $30^{\circ}C$, 유동형태는 균일한 것으로 가정하고, 검사 기록지에 의한 주제어실 ESF 공기정화계통의 유량이 12,986 CFM이고, $610{\times}610mm^2$의 HEPA 필터가 9개 설치되어 있으므로 HEPA 필터 단면를 지나는 유속은 1.83 m/s이다. 주제어실 공기정화계통 모델링시 공기 유동이 흐르지 않는 필터 테두리 지지대를 고려하여 현장과 유사한 유동현상을 모사하였다. 약 8 m/s로 기록된 활성탄 흡착기 하단의 공기유동은 별도의 분석을 통해 7 m/s 이상의 유속이 모사되도록 CFD 분석하였다. 연료건물 비상배기계통 및 비상노심냉각계통 기기실 배기정화계통의 공기정화계통에 대해서도 CFD 분석한 결과, 시뮬레이터의 유속을 조절하면 세가지 ESF 공기정화계통을 모두 모사할 수 있음을 확인하였다. CFD 분석 후 시뮬레이터를 원자력등급으로 제작하였고, 본 실험에 착수하기 전에 공기유동 분포도실험을 통해 시뮬레이터의 신뢰도를 검증하였다. 검증결과 중급 필터를 장착한 상태에서 시뮬레이터의 필터 지지대 부분을 제외한 내부에서 공기유동이 고르게 분포함을 확인하였고, 제작된 시뮬레이터는 Reg. Guide 1.52(Rev.3) 개정 내용 확인을 위한 실험에 사용되었다.

• Asia pacific journal of information systems
• /
• 제20권3호
• /
• pp.191-204
• /
• 2010

Recently, the CO2 emission and energy consumption have become critical global issues to decide the future of nations. Especially, the spread of IT products and the increased use of internet and web applications result in the energy consumption and CO2 emission of IT industry though information technologies drive global economic growth. EU, the United States, Japan and other developed countries are using IT related environmental regulations such as WEEE(Waste Electrical and Electronic Equipment), RoHS(Restriction of the use of Certain Hazardous Substance), REACH(Registration, Evaluation, Authorization and Restriction of CHemicals) and EuP(Energy using Product), and have established systematic green business/IT strategies to enhance the competitiveness of IT industry. For example, the Japan government proposed the "Green IT initiative" for being compatible with economic growth and environmental protection. Not only energy saving technologies but energy saving systems have been developed for accomplishing sustainable development. Korea's CO2 emission and energy consumption continuously have grown at comparatively high rates. They are related to its industrial structure depending on high energy-consuming industries such as iron and steel Industry, automotive industry, shipbuilding industry, semiconductor industry, and so on. In particular, export proportion of IT manufacturing is quite high in Korea. For example, the global market share of the semiconductor such as DRAM was about 80% in 2008. Accordingly, Korea needs to establish a systematic strategy to respond to the global environmental regulations and to maintain competitiveness in the IT industry. However, green competitiveness of Korea ranked 11th among 15 major countries and R&D budget for green technology is not large enough to develop energy-saving technologies for infrastructure and value chain of low-carbon society though that grows at high rates. Moreover, there are no concrete action plans in Korea. This research aims to deduce the priorities of the Korean green business/IT strategies to use multi attribute weighted average method. We selected a panel of 19 experts who work at the green business related firms such as HP, IBM, Fujitsu and so on, and selected six assessment indices such as the urgency of the technology development, the technology gap between Korea and the developed countries, the effect of import substitution, the spillover effect of technology, the market growth, and the export potential of the package or stand-alone products by existing literature review. We submitted questionnaires at approximately weekly intervals to them for priorities of the green business/IT strategies. The strategies broadly classify as follows. The first strategy which consists of the green business/IT policy and standardization, process and performance management and IT industry and legislative alignment relates to government's role in the green economy. The second strategy relates to IT to support environment sustainability such as the travel and ways of working management, printer output and recycling, intelligent building, printer rationalization and collaboration and connectivity. The last strategy relates to green IT systems, services and usage such as the data center consolidation and energy management, hardware recycle decommission, server and storage virtualization, device power management, and service supplier management. All the questionnaires were assessed via a five-point Likert scale ranging from "very little" to "very large." Our findings show that the IT to support environment sustainability is prior to the other strategies. In detail, the green business /IT policy and standardization is the most important in the government's role. The strategies of intelligent building and the travel and ways of working management are prior to the others for supporting environment sustainability. Finally, the strategies for the data center consolidation and energy management and server and storage virtualization have the huge influence for green IT systems, services and usage This research results the following implications. The amount of energy consumption and CO2 emissions of IT equipment including electrical business equipment will need to be clearly indicated in order to manage the effect of green business/IT strategy. And it is necessary to develop tools that measure the performance of green business/IT by each step. Additionally, intelligent building could grow up in energy-saving, growth of low carbon and related industries together. It is necessary to expand the affect of virtualization though adjusting and controlling the relationship between the management teams.

• Asia pacific journal of information systems
• /
• 제21권1호
• /
• pp.1-27
• /
• 2011

In an attempt to cope with widespread, dynamic, and accelerating changes in both internal and external business environments, companies often utilize information technologies such as SCM(Supply Chain Management). To date, SCM research has mainly focused on the effects of dynamic factors on SCM success and emphasized adoption strategies and critical success factors. Consequently, the effects of more static factors such as interdependency between SCM partners have been largely ignored. The purpose of this study, therefore, is to examine the effects of both dynamic and static factors on SCM performance by controlling for information quality and partnership quality. The five factors examined in this study include innovative ness, mutual dependency, quality of information, partnership quality, and SCM performance. All factors were examined from the perspective of part suppliers, except the mutual dependency which was examined from two aspects: supplier's dependency on customer and customer's dependency on supplier. Data was collected through five hundred survey questionnaires distributed to the part supplier companies that have implemented SCM systems for at least one year. As a result, a total of 170 valid responses were obtained. A structural equation research model was fitted using SAS 9.1.3 and SMART-PLS 2.0. The results of this study can be summarized as follows. First, innovativeness positively affected SCM information quality. SCM partnership quality, and ultimately SCM performance. The path coefficient between innovativeness and information quality was 0.387, with a t-value of 3.528. Innovativeness also had a positively direct effect on partnership quality. The path coefficient was 0.351 with a t-value of 3.366. The total effect of innovativeness on partnership quality was significant, although its indirect effect on partnership quality by altering information quality was negligible. The total indirect effect of innovativeness on SCM performance by affecting information quality and partnership quality was significant with a p-value of 0.014. Innovativeness played an important role in determining SCM performance. Second, mutual dependency showed no significant effect on SCM information quality. This result contradicts the earlier assertion that the more dependent two companies are, the more accurate and timely the information they exchange ought to be. This study showed that this may not be the case; a partner may provide information of poor quality even when it is strongly dependent on the other. Mutual dependency showed significant effect on partnership quality. However, when the mutual dependency perceived by suppliers was divided into two parts, one being a supplier's dependency on its customer company and the other being a customer's dependency on the supplier, the latter showed a significant impact on the perceived SCM partnership quality. This result indicates that a customer company can hardly improve the partnership quality perceived by suppliers by making them more dependent. It improves only when the suppliers perceive that their partners, typically having more bargaining power, are more dependent on them. The overall effect of mutual dependency of any kind on SCM performance, however, was not significant. Although mutual dependency has been mentioned as an important static factor influencing almost every aspect of cooperation on a supply chain, its influences may not be as significant as it was initially perceived to be. Third, the correlation between information quality and partnership quality was 0.448 with a p-value of less than 0.001. Information quality had a path coefficient of 0.256 to partnership quality with a t-value of 2.940. The quality of information exchanged between partners may have an impact on their partnership quality. Fourth, information quality also had a significant impact on SCM performance with a path coefficient of 0.325 with a t-value of 3.611. In this study, SCM performance was divided into four categories: product quality, cost saving, service quality, and order fulfillment. Information quality has Significant impacts on product quality, cost saving and service quality, but not on order fulfillment. Fifth, partnership quality, as expected, had a significant impact on SCM performance. The path coefficient was 0.403 with a t-value of 3.539. Partnership quality, like information quality, had positive impacts on product quality, cost saving and service quality, but showed no impact on order fulfillment. It seemed that order fulfillment is the hardest category of performance that SCM can satisfy. One major limitation of this study is that it surveyed only the suppliers. To better understand the dual aspects of SCM, it is important to survey both suppliers and the assemblers, especially in pairs. This research, to our best knowledge, was the first attempt to study the level of dependency between the two groups by measuring the dual aspects of SCM and studying mutual dependency from the categories of suppliers and assemblers each.. In the future, a more comprehensive and precise measurement of SCM characteristics needs to be achieved by examining from both the supplier's and assembler's perspectives.

• 핵의학기술
• /
• 제12권1호
• /
• pp.91-98
• /
• 2008

산업의 발달과 기술개발을 통해 양적이나 질적으로 많은 성장을 해오고 있다. 특히 연구 개발 또는 진단용 방사성동위원소 사용 및 생산은 국내 사이클로트론 보급이 확대됨에 따라 그 성장추세가 급격하게 이루어지고 있다. 방사성동위원소를 취급하는 기관으로는 병원, 발전소, 연구소, 교육기관 등이며, 이러한 시설은 급기보다 배기시설을 중요시 하는데, 이러한 시설에서 발생되는 방사능 오염물질이 외부로 방출될 경우 주변 환경을 오염시키기 때문에 원자력법에 의하여 배기되는 공기 중 방사능 농도를 규제하고 있다. 본 과제에서는 현재 국내병원들의 배기관리 실태파악 및 현황을 설명하고 이러한 운영현황이 규제기관인 한국원자력 안전기술원의 원자력법에서 규정한 배출관리 기준을 만족하는지에 대해 알아보고 개선과제를 도출하여 기준안을 마련하여야 할 것이다. 필터의 정의 및 pre filter, hepa filter, charcol filter의 특징과 구조에 대해 알아보고 RI filter 교체 절차와 주의할 사항을 알아보았다. 규제기관인 한국원자력안전기술원의 원자력법에서 규정한 배출관리 기준 및 RI filter의 교체주기의 기준을 제시하겠고 국내 의료기관의 RI배기관리 실태파악 및 현황을 설명하고 이러한 운영현황의 장단점을 비교분석하여 기준안을 제시하였다. 분당서울대학교병원이 도입한 RCMS 기능 및 타 의료기관에서 사용 중에 있는 디지털 차압 게이지를 PC와 연동하여 구동하는 시스템을 제시하였다. RI를 사용하는 의료기관들의 의료시스템은 21세기를 맞아 눈부시게 개혁되고 있다. 특히 방사선안전관리 분야도 국제적 변화에 발맞추어 세분화, 고도화, 첨단화로 급격한 기술변화에 거듭나고 있다. 그러나 현재의 배기관리 시스템은 과거의 형태에서 변화를 찾아 볼 수 없다. 우선 우리나라의 발전된 정보통신 기술을 적극 활용하여 RCMS 및 디지털 차압게이지를 이용한 시스템 기능을 강화하여 RI filter의 교체주기와 배출관리 규정의 두 마리 토끼를 잡아야 할 것이다. 본 과제에서는 지금까지 배기관리 시스템을 현장에서 사용하는 방사선안전관리자로서 현재의 문제점 및 개선안에 대한 개인적인 제안사항을 제시하였다. 이러한 제안은 보다 심도 깊은 검토과정을 거쳐추진을 할 필요가 있다고 판단된다.

• 천문학논총
• /
• 제36권3호
• /
• pp.65-78
• /
• 2021

Jagyeokru, an automatic striking water clock described in the Sejong Sillok (Veritable Records of King Sejong) is essentially composed of a water quantity control device and a time-signal device, with the former controlling the amount or the flow rate of water and the latter automatically informing the time based on the former. What connects these two parts is a signal generating device or a power transmission device called the 'Jujeon' system, which includes a copper rod on the float and ball-racked scheduled plates. The copper products excavated under Gongpyeong-dong in Seoul include a lot of broken plate pieces and cylinder-like devices. If some plate pieces are put together, a large square plate with circular holes located in a zigzag can be completed, and at the upper right of it is carved 'the first scheduled plate (一箭).' Cylinder-like devices generally 3.8 cm in diameter are able to release a ball, and have a ginkgo leaf-like screen fixed on the inner axis and a bird-shaped hook of which the leg fixes another axis and the beak attaches to the leaf side. The lateral view of this cylinder-like device appears like a trapezoid and mounts an iron ball. The function of releasing a ball agrees with the description of Borugak Pavilion, where Jagyeokru was installed, written by Kim Don (1385 ~ 1440). The other accounts of Borugak Pavilion's and Heumgyeonggak Pavilion's water clocks describe these copper plates and ball releasing devices as the 'Jujeon' system. According to the description of Borugak Pavilion, a square wooden column has copper plates on the left and right sides the same height as the column, and the left copper plate has 12 drilled holes to keep the time of a 12 double-hours. Meanwhile, the right plate has 25 holes which represent seasonal night 5-hours (Kyeong) and their 5-subhours (Jeom), not 12 hours. There are 11 scheduled plates for seasonal night 5-hours made with copper, which are made to be attached or detached as the season. In accordance with Nujutongui (manual for the operation of the yardstick for the clepsydra), the first scheduled plate for the night is used from the winter solstice (冬至) to 2 days after Daehan (大寒), and from 4 days before Soseol (小雪) to a day before the winter solstice. Besides the first scheduled plate, we confirm discovering a third scheduled plate and a sixth scheduled plate among the excavated copper materials based on the spacing between holes. On the other hand, the width of the scheduled plate is different for these artifacts, measured as 144 mm compared to the description of the Borugak Pavilion, which is recorded as 51 mm. From this perspective, they may be the scheduled plates for the Heumgyeonggak Ongru made in 1438 (or 1554) or for the new Fortress Pavilion installed in Changdeokgung palace completed in 1536 (the 31^st year of the reign of King Jungjong) in the early Joseon dynasty. This study presents the concept of the scheduled plates described in the literature, including their new operating mechanism. In addition, a detailed model of 11 scheduled plates is designed from the records and on the excavated relics. It is expected that this study will aid in efforts to restore and reconstruct the automatic water clocks of the early Joseon dynasty.