• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.221-224
• /
• 2000

The issue of supporting TCP traffic over ATM networks is currently one of the most important issues in the field of data networks. One important part of this issue is congestion control. In general, congestion control uses method such as packet drop to relieve network resource when the network is congested so as to maintain high throughput and low delay. In addition, congestion control is required to ensure fair sharing of resources among all users during congestion. In this paper we propose a new congestion control method using WRED & per-VC accounting mechanism. This packet discard scheme is proposed with the goal to provide both good performance in terms of throughput and fairness in terms of bandwidth exploitation of the output link among all virtual circuits.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2E
• /
• pp.25-29
• /
• 2001

In this paper, we propose a new method for selecting the threshold on wavelet packet denoising. In selecting threshold, the method using median is not efficient. Because this method can not recover unvoiced signal corrupted by noise. So we partition a speech signal corrupted by noise into the pure noise section and voiced section using autocorrelation and entropy. The autocorrelation and entropy can reflect disorder of noise. The new method yields more improved denoising effect. Especially unvoiced signal is very nicely reconstructed, and SNR is improved.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1061-1064
• /
• 1999

UDP has likely been used for real-time applications, such as video and audio. UDP supplies minimized transmission delay by omitting the connection setup process, flow control, and retransmission In general, more than 80 percent of the WAN resources are occupied by Transmission Control Protocol(TCP) traffic as opposed to UDP's simplicity, TCP adopts a unique flow control in this paper, I report new methods to minimize a udp packet loss considering TCP flow control on the real-time application the better performance of real time application can be obtained when they reduce a packet size and FIFO buffer scheduling method competing with TCP bandwidth for the bandwidth and buffering.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.267-270
• /
• 2002

Downlink Shared Channel (OSCH) is used for high-speed packet service transmission in WCOMA. The power-controlled performances of the OSCH are studied through simulation works. Under various channel conditions and mobile speeds, the simulation results show that current power control scheme in WCDMA, especially for the OSCH power control, has some problems. In this paper, cause of problems is revealed. Also, the quantitative result related to the OSCH power control problem is analyzed.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.533-536
• /
• 2000

In this paper, we proposed high performance packet forwarding engine for asynchronous transfer mode(ATM) based gigabit routers. The forwarding engine is based on ATM switch and accommodates four 622Mbps ports. The forwarding engine has been designed to be able to process the Intemet protocol(IP) packet at 2.5Gbps using the pipelined If header processing and lookup control mechanism. For high performance packet forwarding, we used content addressable memory(CAM) based routing coprocessor operating in hardware and implemented the pipelined lookup control function into a field programmable gate array(FPGA). The pipelined packet header processing mechanism enhanced the forwarding performance of the If packets ingressed from four different 622Mbps ports. Moreover, the If lookup controller designed to have the performance up to 12.5Mpps. The proposed forwarding engine is also designed to support differentiated services(DS) and multiprotocol label switching(MPLS).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.53-60
• /
• 2011

In Wireless Sensor Networks, IEEE 802.11 happen unnecessary energy consume because of packet transmission using maximum power between sensor node. The BASIC scheme is to use maximum transmission power for RTS-CTS and minimum required transmission power so as to high energy efficiency for DATA-ACK. However BASIC scheme may degrade network throughput with collision of ACK packet by node in carrier sensing zone and may result in higher energy consumption than when using IEEE 802.11 without power control. Existing PCM(Power Control MAC) scheme is to use DATA packet transmission method by periodically maximum power level so as to sensing DATA packet transmit in carrier sensing zone of transmission node, and this method can avoid collision of ACK packet. This paper present problem by energy efficiency of PCM scheme, and design some more improved PCM scheme.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1243-1247
• /
• 1996

In this paper, a small PLC system is designed and developed for the distributed building control and fire control system. It uses 8031, a 8-bit micro controller from Intel Inc. The size of the PLC is $7cm{\times}8cm$ and the PLC can accept 4 sensor inputs and drive 4 relay outputs, which operates at 24V. Multiple access of PLC by one host computer is implemented by assigning a unique 10 to each PLC, which ranges from 0 to 126. The operation starts by sending a command packet from host computer to a PLC and the PLC of the same 10 fetches the command packet by comparing the first byte of the command packet with its own 10. The PLC is programmed to perform a various functions and the function is selected by the content of the command byte, which is the second byte of the command packet. The third byte, which is the last byte, is a checksum byte. The checksum byte is the sum of the first byte and the second byte and is used to detect the communication error. Depending on the content of the command byte, PLC performs the desired function and returns the response packet back to the host computer. The response packet is also a three-byte packet, 10 byte, response byte and checksum byte. For the independent operation of PLC without being controlled by the host computer, variable length RULE data packet is sent to PLC. In case the communication line is broken, the PLC perform the independent operation by referencing the RULE data. The applicable areas are; building automation system, distributed factory automation, measurement of temperature of toxic or dangerous area.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.915-927
• /
• 2008

Networked control systems(NCSs) have gained increasing attention in recent years due to their advantages and potential applications. The network Quality-of-Service(QoS) in NCSs always fluctuates due to changes of the traffic load and available network resources. To handle the network QoS variations problem, this paper presents an intelligent scheduling control method for NCSs, where the sampling period and the control parameters are simultaneously scheduled to compensate the effect of QoS variation on NCSs performance. For NCSs with network-induced delays and packet dropouts, a discrete-time switch model is proposed. By defining a sampling-period-dependent Lyapunov function and a common quadratic Lyapunov function, the stability conditions are derived for NCSs in terms of linear matrix inequalities(LMIs). Based on the obtained stability conditions, the corresponding controller design problem is solved and the performance optimization problem is also investigated. Simulation results are given to demonstrate the effectiveness of the proposed approaches.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1132-1137
• /
• 2013

This paper considers the $H_{\infty}$ control problem for networked control systems(NCSs). In order to solve the problem which comes from discontinuous control signal in NCSs, an approach that discontinuous control signals treat time-varying delayed continuous signals is applied to achieve $H_{\infty}$ stability of NCSs. In addition, randomly occurring packet losses and disturbances are considered by introducing stochastic variables with Bernoulli distribution. Based on Lyapunov stability theory, a new stability condition is obtained via linear matrix inequality formulation to find the $H_{\infty}$ controller which achieves the mean square stability of NCSs. Finally, the proposed method is applied to a numerical example in order to show the effectiveness of our results.

• Proceedings of the KSPS conference
• /
• 2003.10a
• /
• pp.109-112
• /
• 2003

In real time packetized voice applications, missing frames is a major source of voice quality degradation. Thus packet loss concealment(PLC) algorithms are needed to guarantee the QoS of the VoIP. Still current speech codecs for VoIP work poor when consecutive packet losses are issued. In this paper, we proposed a new PLC algorithm for the G.729 codec. Our algorithm works better especially when the consecutive packet loss occurs mainly because it adopts an adaptive gain controller utilizing the number of missing packet information combined with a fixed codebook vector estimation algorithm and LPC bandwidth expansion.