DOI QR코드

DOI QR Code

Collision Avoidance Power Control of Carrier Sensing Zone for Energy Efficiency in Wireless Sensor Network

무선 센서 네트워크에서 에너지 효율을 위한 반송파 감지지역의 충돌방지 전력제어

  • 김창복 (가천의과학대학교 정보공학부) ;
  • 김남일 (가천의과학대학교 정보공학부)
  • Received : 2011.06.07
  • Accepted : 2011.08.12
  • Published : 2011.08.31

Abstract

In Wireless Sensor Networks, IEEE 802.11 happen unnecessary energy consume because of packet transmission using maximum power between sensor node. The BASIC scheme is to use maximum transmission power for RTS-CTS and minimum required transmission power so as to high energy efficiency for DATA-ACK. However BASIC scheme may degrade network throughput with collision of ACK packet by node in carrier sensing zone and may result in higher energy consumption than when using IEEE 802.11 without power control. Existing PCM(Power Control MAC) scheme is to use DATA packet transmission method by periodically maximum power level so as to sensing DATA packet transmit in carrier sensing zone of transmission node, and this method can avoid collision of ACK packet. This paper present problem by energy efficiency of PCM scheme, and design some more improved PCM scheme.

무선 센서 네트워크에서, IEEE 802.11은 센서노드간에 최대전력을 사용하여 패킷을 전송하기 때문에, 불필요한 에너지 소모가 발생한다. BASIC구조는 RTS-CTS패킷 전송에 최대 전송전력을 사용하며, 에너지 효율을 높이기 위해서 DATA-ACK전송에 최소한으로 필요한 전송전력을 사용한다. 그러나 BASIC구조는 반송파 감지지역의 노드에 의한 ACK패킷의 충돌로 인해 네트워크 수율이 떨어지며, 전력제어를 하지 않는 IEEE 802.11을 사용할 때 보다 더 높은 에너지 소모를 가진다. 기존에 제안된 PCM(Power Control MAC)구조는 ACK패킷의 충돌을 피하기 위해, 반송파 감지지역에서 DATA패킷의 전송을 감지하기 위해 주기적으로 최대 전력레벨로 DATA패킷 전송방법을 이용하였다. 본 논문에서는 기존의 PCM구조의 에너지 효율에 대한 문제점을 제시하고, 보다 높은 에너지 효율을 가진 개선된 PCM구조를 제안하였다.

Keywords

References

  1. Akyildiz, I.F. Su, W. Sankarasubramaniam, Y. and Cayirci E., "A Survey on Sensor Networks", IEEE Communications Magazine, August 2002.
  2. E. S. Jung , N. H. Vaidya., "An Energy Efficient MAC Protocol for Wireless LANs", In INFOCOM 2002, June 2002.
  3. W. Ye, J. Heidemann, and D. Estrin, "Medium access control with coordinated, adaptive sleeping for sessor network", in IEEE Transaction on Networking, June 2003.
  4. S. Agarwal, S. Krishnamurthy, R. H. Katz, and S. K. Dao, "Distributed Power Control in Ad-hoc Wireless Network", In PIMRC01, 2001.
  5. J. P. Ebert , A. Wolisz, "Combined Tuning of RF Powew and Medium Access Control for WLANs", In IEEE International Workshop on Mobile Multimedia Communications (MoMuC'99), November 1999.
  6. Giuseppe Bianchi, "Performance Analysis of the IEEE 802.11 Distributed Coordination Function", IEEE Journal on Selected Area in Communications, March 2000.
  7. Eun-Sun Jung, Nitin H. Vaidya, "A Power Control MAC Protocol for Ad Hoc Networks", International Conference on Mobile Computing and Networking (MOBICOM'02), pp. 23-28, Semptember, 2002.
  8. The editors of IEEE 802.11, "Wireless LAN Medium Access Control(MAC) and Physical Layer(PHY) specification", 1997.
  9. J. Gomez, A. T. Campbell, M. Naghshineh, and C.Bisdikian, "Conserving transmission Power in Writless Ad Hoc Networks", In ICNP'01 November 2001.
  10. M. B. Pursley, H. B. Russell, and J. S. Wysocarski, "energy-Efficient Transmission and Routing Protocols for Wireless Multiple-hop Networks and Spread-Spectrum Radios. In EUROCOMM 2000, pp. 1-5, 2000.
  11. J. P. Monks, V. Bharghavan, and W.mei W. Hwu, "A Power Controlled Multiple Access Protocol for Wiless Packet Networks", In INFOCOM 2001, April 2001.