• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.660-664
• /
• 2010

This paper proposes a backoff control scheme for guaranteeing fair packet transmissions in TDMA wireless networks. In order to maximize the system performance, the number of packets transmitted in a frame should be kept at a proper level. In the proposed scheme, the base station calculates the packet transmission probability according to the offered loads and then broadcasts to all the mobile stations. Mobile stations attempt to transmit a packet with the received probability. Simulation results show that the proposed scheme can offer better system throughput and delay performance than the conventional one regardless of the offered loads.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.59-60
• /
• 2006

TCP applied to the wireless-wired integrated network is the one that was applied to the existing wired network. In the wireless-wired integrated network, both wireless and congestion loss can occur. When wireless packet losses occur, the congestion control of TCP causes performance degradation by reducing its transmission rate. In this paper, we propose the algorithm to distinguish the wireless packet loss from congestion packet loss using MIB of the 802.11 MAC which has been generally used recently in wireless links.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.4
• /
• pp.176-181
• /
• 2001

As the data rate between chip-to-chip gets high, the skin effect and load of pins deteriorate noise margin. With these, noise disturbances on the bus channel make it difficult for receiver circuits to read the data signal. This paper has proposed a new pre-emphasis driver circuit which achieves wide noise margin by enlarging the signal voltage range during data transition. When data is transferred from a memory chip to a controller, the output boltage of the driver circuit reaches the final values through the intermediate voltage level. The proposed driver supplies more currents applicable to a packet-based memory system, because it needs no additional control signal and realizes very small area. The circuit has been designed in a 0.18 ${\mu}m$ CMOS process, and HSPICE simulation results have shown that the data rate of 1.32 Gbps be achieved. Due to its result, the proposed driver can achieved higher speed than conventional driver by 10%.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.55-60
• /
• 2007

This paper proposes a fast and scalable priority queue architecture for use in high-speed networks which supports quality of service (QoS) guarantees. This architecture is cost-effective since a single queue can generate outputs to multiple out-links. Also, compared with the previous multiple systolic array priority queues, the proposed queue provides fast output generation which is important to high-speed packet schedulers, using a special control block. In addition this architecture provides the feature of high scalability.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.05a
• /
• pp.1-4
• /
• 2005

Information communication environment integrates communication, broadcasting and internet, and Digital Convergence service emerges in result. Thus, the effective routers are needed so that they can transmit a huge number of data to core internet through appropriate base center. Therefore, the network guaranteeing QoS in transport layer supports interoperability with different wireless networks. So as to users receive necessary information anywhere seamlessly, the network architecture focuses on packet transmission and it is efficient for the control layer switches and controls packets between different networks. Since individual users take advantage of different services and data, the effective router architecture must be designed. Hence in this paper we design monitoring technique to solve security problem and to support premium service to ultimate users. Thereafter, we run opnet simulation and show the improvement of proposed router architecture.

• Journal of Broadcast Engineering
• /
• v.10 no.4 s.29
• /
• pp.548-556
• /
• 2005

In wireless network environments, wireless channels are characterized by time-varying fading and interference conditions, which may lead to burst packet corruptions and delay variation. This can cause severe quality degradation of streaming media. To guarantee successful transmission of media over the hostile wireless networks, where channel conditions are highly fluctuating, a flexible and network-adaptive transport method is required. Thus, we propose a network-adaptive transport error control consisting of packet-level interleaved FEC and delay-constrained ARQ, which acts as an application-level transport method of streaming media to alleviate burst packet losses while adapting to the changing channel condition in wireless networks. The performances of the proposed network-adaptive transport error control, general error control schemes, and hybrid schemes are evaluated by a developed simulator at the transport-level and video quality of streaming media. Simulation results show that the proposed mechanism provides the best overall performance among compared other schemes in terms of the transport-level performance of error control and the performance of video quality for streaming media.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.69-76
• /
• 2012

This paper proposes an efficient power consumption scheme using sleep mode in home gateway. The scheme by this paper classifies incoming real time packet and non-real time packet in home gateway and delay non-real time packet. Therefore, the home gateway can have longer sleep time because non-real time packet can get additional delay time by proposing mechanism using timer. We use non-preemptive two priority queueing model for performance analysis. As a results, we verify that power consumption of proposed scheme is reduced more than existing scheme by delay of non-real time traffic.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.141-156
• /
• 2009

As the TCP is the protocol designed for the wired network that packet loss probability is very low, because TCP transmitter takes it for granted that the packet loss by the wireless network characteristics is occurred by the network congestion and lowers the transmitter's transmission rate, the performance is degraded. The Snoop Protocol was designed for the wired network by putting the Snoop agent module on the BS(Base Station) that connect the wire network to the wireless network to complement the TCP problem. The Snoop agent cash the packets being transferred to the wireless terminal and recover the loss by resending locally for the error occurred in the wireless link. The Snoop agent blocks the unnecessary congestion control by preventing the dupack (duplicate acknowledgement)for the retransmitted packet from sending to the sender and hiding the loss in the wireless link from the sender. We evaluated the performance in the wired/wireless network and in various TCP versions using the TCP designed for the wired network and the Snoop designed for the wireless network and evaluated the performance of the wired/wireless hybrid network in the wireless link environment that the continuous packet loss occur.

• The Journal of the Korea Contents Association
• /
• v.8 no.4
• /
• pp.79-85
• /
• 2008

These days, orthogonal frequency division multiplexing (OFDM) transmission method is widely used for broadband communication systems. The OFDM, which uses sine waves as orthogonal basis functions, is one of the orthogonal waveform modulation techniques. In this paper, we investigate a wavelet packet modulation method which uses wavelet packets instead of sine waves as the basis functions. The wavelet packets may have different patterns in two dimensional time-frequency domain, and we can design the packets appropriate for the channel environments with much flexibility. In this paper, we investigate the characteristics of the wavelet packet modulation as one of the multicarrier modulation methods, And we illustrate by simulations that narrowband interference can be reduced effectively by control the bandwidth of the wavelet packets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1536-1547
• /
• 1994

This paper presented the implementation and design of narrowband wireless MODEM for packet transmission. The MODEM consists of transmitter, receiver, and the control unit. The BPSK modulation with narrowband filtering is used. The receiver consists of functional modules such as carrier recovery, bit synchronization, lock detector, etc. We evaluated the performance of packet transmission with three MODEM sets implemented in distributed packet radio network. We confirmed the transmission of packetized data through RS232C port of PC. Also, we presented results of experimental data by using measuring instruments. The implemented MODEM in this paper is expected to be useful for the design of wireless LAN system.