• 한국조명전기설비학회지:조명전기설비
• /
• 제9권4호
• /
• pp.103-110
• /
• 1995

Fuzzy theory is recently finding wide popularity in various applications that include management, economics, medicine and process control system. This paper describes application of fuzzy logic in a current control system that use a inverter welding machine. The Fuzzy control is then extended to the current loop control, replacing the conventional proportional-integral(PI) control methods. The fuzzy control algorithms have been developed in detail and verified by experiments of a inverter welding system. The experimentation study indicates the superiority of fuzzy control over the I control methods. Fuzzy control seems to have a lot of promise in the applications of welding process control system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.375-377
• /
• 2003

In this study, we employ the control patches, which have been created in previous photogrammetric projects, serving for the candidates of the control points that are likely to be found in the newly taken photos by utilizing image matching technique. Among others, the successful implementation of the above idea lies in the underlying factors: (1). Predicting the control patches and projecting them onto new photos; (2). Alignment of control patches with respect to the new photos; (3). Generating the equivalent ground elements of control patches versus the new photos for the purpose of correlation; (4). Developing effective matching methods and matching strategy; (5). Refining the exterior orientation parameters. What may show significance in this work comparing to traditional aerial-triangulation chain is that whenever at least three matched control patches succeed in a single photo, it follows that single photo orientation is applicable. The experiments suggest the potential efficiency of automatic control point measurement from control patch database and photo orientation by the proposed workflow.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.99-105
• /
• 2014

This paper presents a comparison of operating characteristics for industrial water cooler with variation control methods. The performance analysis regarding the characteristics of condensation capacity, evaporation capacity, compressor load, COP of an on-off type cooler, a hot gas-bypass control type cooler and an inverter control type cooler with respect to the system load is reviewed, respectively. The primary results are as following: the variation of required compressor load of an on-off type cooler with respect to load is 5%, that of hot gas-bypass type is 18% and 66% for an inverter control type cooler. As the result shows, an inverter control type yields relatively huge difference of required compressor load compared to other types of control system. In terms of partial load, COP of an inverter control type cooler presents the highest value, and is considered as the optimized type for the used of the system involving frequent partial load.

• 대한간호학회지
• /
• 제33권6호
• /
• pp.784-791
• /
• 2003

Purpose: This study is to investigate the influencing factors in the consistent use of contraception methods by comparing consistent and inconsistent users on partner communication, contraceptive control perception, and sexual autonomy among married Korean women. Method: This study consists of 243 married women living in Korea. A convenient sampling technique was used and data were collected by self report questionnaires from September 14, 2000 to October 20, 2000. Result: Only 41.6% of women were using contraception methods consistently and the rest of them were using contraception methods inconsistently. Between the two groups, statistical significances were noted in sexual communication(t=-2.5, p=.01), perceived contraceptive control(t=-7.5, p=.00) and sexual autonomy(t=-3.1, p=.00). As for general communication, it was not statistically significant(t=-1.0, p=.31). Conclusion: Family planning program advisors should recognize that intervention programs for the promotion of consistent contraceptive behavior should focus on the sexual communication, perceived contraceptive control, and sexual autonomy.

• Communications for Statistical Applications and Methods
• /
• 제14권2호
• /
• pp.365-376
• /
• 2007

This research considers to propose the control charts using median for the location parameter. In order to decide the control limits, we apply several bootstrap methods through the approach obtaining the confidence interval except the standard bootstrap method. Then we illustrate our procedure using an example and compare the performance among the various bootstrap methods by obtaining the length between control limits through the simulation study. The standard bootstrap may be apt to yield shortest length while the bootstrap-t method, the longest one. Finally we comment briefly about some specific features as concluding remarks.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.11-16
• /
• 2002

In this paper, we present two successful results from active controls of flows over a circular cylinder and a sphere for drag reduction. The Reynolds number range considered for the flow over a circular cylinder is 40-3900 based on the free-stream velocity and cylinder diameter, whereas for the flow over a sphere it is $10^{5}$ based on the free-stream velocity and sphere diameter. The successful active control methods are a distributed (spatially periodic) forcing and a high-frequency (time periodic) forcing. With these control methods, the mean drag and lift fluctuations decrease and vortical structures are significantly modified. For example, the time-periodic forcing at a high frequency (larger than 20 times the vortex shedding frequency) produces $50{\%}$ drag reduction for the flow over a sphere at $Re=10^{5}$. The distributed forcing applied to the flow over a circular cylinder results in a significant drag reduction at all the Reynolds numbers investigated.

• 전력전자학회논문지
• /
• 제5권6호
• /
• pp.552-559
• /
• 2000

유도전동기의 센서리스 벡터제어 방식은 선동기 등가모델을 이용하는 경우가 대부분이다. 따라서 센서리스 벡터 제어 기능을 갖는 인버터에 전동기 상수의 자동 측정 가능은 필수적이며, 전동기 상수 측정의 정밀도가 센서리스 벡터제어 인버터의 성능에 큰 영향을 미친다. 본 논문에서는 기존의 자동 측정 방법에 있어서의 문제점을 고찰하고, 이를 보완한 새로운 유도전동기 상수 측정 방법을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.754-756
• /
• 1998

In this paper the control methods for the synchronous generator is designed based on the two-degree-of-freedom (TDOF) control methods which can safisty the command following property and Robust control property at the same time. The power systems is reduced to one machine infinite-bus system. Robust stability of the proposed power system stabilizer is checked through the simulation considering the circumstance which can happen in real situation.

• 상하수도학회지
• /
• 제30권5호
• /
• pp.597-604
• /
• 2016

This study was begun with the object of actively reflection the rapid technological advancements of the electronical control and mechanical control industries to sewage disposal methods. Or focuses on applying a flow control method that utilizes inverters and automatic valves to sewage treatment process systems. This study proposes that sewage treatment process systems architects must acquire a certain degree of technical skills in the areas of electrical and mechanical controls in order to raise the standard of completeness of sewage treatment process systems. And further emphasizes that there is required continuous research on automatics valves that are used in sewage treatment.

• 한국해양공학회지
• /
• 제18권1호
• /
• pp.35-40
• /
• 2004

This paper is concerned with the simulator's ability to estimate deformation due to welding of panel blocks. An efficient computer program system has been developed which can be applied both to estimation of weld-induced deformation, under the given welding conditions, and to reflection of effect when methods for deformation control of are applied. This paper briefly describes the background of the present simulator and shows some results applying the simulator to the estimation of weld-induced deformation. In addition, the results when methods for deformation control are applied are also included.