• 제목/요약/키워드: Continuous block system

검색결과 87건 처리시간 0.025초

노크센서를 이용한 점화시기 피이드백 제어에 관한 연구 (Study on ignition timing feedback control using the knock sensor)

  • 김연준;고상근
    • 오토저널
    • /
    • 제14권4호
    • /
    • pp.61-67
    • /
    • 1992
  • The ignition timing feedback control system was studied to enhance the engine power and to reduce the fuel consumption by optimizing the spark timing. The signal of a piezo-electric vibration transducer attached to the engine block was compared with that of a pressure transducer in order to determine the knock intensity. With the result of comparison the ignition timing feedback control system which detect the knock and correct the spark timing was set up. The ignition could be more advaced with this control system than the existing system without the continuous knocking, therefore the engine torque was increased.

  • PDF

지속가능한 개발을 위한 농촌전원단지 설계 연구 (A Study on the Designing for Rural Housing Block Considering Sustainable Development)

  • 유수훈;이호정
    • 한국디지털건축인테리어학회논문집
    • /
    • 제8권2호
    • /
    • pp.83-92
    • /
    • 2008
  • This study is about architectural design for rural housing block redevelopment for districts with existing residents considering sustainable development. The study suggests development direction focusing on preserving the regional characteristics, and presentation of suburban-style housing complex reflecting on the future tenant's individuality and demand. The preexisting development approach for suburban-style housing complex which was planned by the developer, failed to recognize taste of the future tenants. Profitability being the priority, it also resulted in a serious environmental disruption. In this development however, through a systematic direction for site development and site analysis, conducting surveys through future tenants, attempted for a continuous growth of the community. The study is presented covering the following areas; site's pathway system, nature conservation plan, lot plan, land use, arrangement plan, housing plan and community facility.

  • PDF

교육행정정보시스템 학교생활기록부 데이터의 안정성 확보를 위한 블록체인 설계 및 구현 (Design and Implementation of Blockchain for Securing Data of National Education Information System School Life Records)

  • 김희경;박남제
    • 한국융합학회논문지
    • /
    • 제11권3호
    • /
    • pp.27-35
    • /
    • 2020
  • 본 연구의 목적은 시·도교육청 교육행정정보시스템 학생생활기록부가 중요한 교육활동의 기록이나, 지속적으로 불법유출·조작하는 등의 문제점을 방지하기 위한 기술적 구현방법을 연구하는 것이다. 이를 위해 본 논문에서는 정해진 조직 또는 개인만이 참여할 수 있는 프라이빗 블록체인을 적용함으로서 외부자에 의한 블록네트워크 참여를 방지하고, 생활기록부 학생정보 블록과 접근기록 블록 두 종류의 블록 데이터를 생성하여 정당한 권한을 부여받은 실무자에 의해 서만 등록, 수정, 접근할 수 있는 블록 메커니즘을 제시하였다. 그 결과, 제3자에 의한 생활기록부의 위·변조방지와 생활 기록부의 무결성 확보를 할 수 있는 하나의 대안을 마련하였으며, 실제 교육행정정보시스템에 적용하게 된다면 생활기록부 운영과 관리가 신뢰할 수 있다는 사회적 공감대를 확보하게 될 것이다.

PC를 이용한 자동제어시스템 개발 (Development of a process control package using PC)

  • 구영재;이준서;이인범;장근수
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
    • /
    • pp.322-326
    • /
    • 1991
  • A real time process control package was developed in an INTEL 80386 based PC and MS OS/2 environment using MS-C and MS-FORTRAN. RTACS(Real Time Advanced Control System), process control computer software for distributed or centralized architectures, is a package which meets functional requirements specified for typical continuous process applications like chemical processes. The package consists of 5 parts, which are DB(data base), OCF(Operator Console Functions), CL (Control logic Library), MSM(Multitasking and Scheduling, Manager) and UAI(User Applications Interface), based upon a table and function block architecture to improve the system performance.

  • PDF

Effect of Departures from Independence for a System

  • Park, Byung-Gu;Jeong, Cheol-Hyun
    • 품질경영학회지
    • /
    • 제19권1호
    • /
    • pp.28-42
    • /
    • 1991
  • For a series or parallel system, though the component lifetimes have the absolutely continuous bivariate exponential distributions(ACBVE) by Block and Basu(1974), the common assumption that the component lifetimes are independent is used. The purpose of this paper, in this case, is to investigate the magnitude of the error caused by erroneous assumption, using the measure proposed by Klein and Moeschberger(1986). Estimation of the measure is conducted by maximum likelihood estimator(MLE) and those estimators are compared with corresponding jackknifed MLE through the Monte Carlo study.

  • PDF

일반화된 적응법칙을 사용한 안정한 기준모델 적응제어 (A Stable Model Reference Adaptive Control with a Generalized Adaptive Law)

  • 이호진;최계근
    • 대한전자공학회논문지
    • /
    • 제26권8호
    • /
    • pp.1167-1177
    • /
    • 1989
  • In this paper, a generalized adaptive law is proposed which uses a rational function type operator for parameter adjustment. To satisfy the passivity condition of the adaptation block, we introduce a constant feedback gain into the adaptation block. This adaptation scheme is applied to the model reference adaptive control of a continuous-time, linear time-invariant, minimum-phase system whose relative degree is 1. We prove the asymptotic stability of the output error of this adaptive system by hyperstability method. It is shown that by digital computer simulations this law can give a better output error transient response in some cases than the conventional gradient adaptive law. And the output error responses for the several types of the proposed adaptation law are examined in the presence of a kind of unmodeled dynamics.

  • PDF

RF-CBTC 시스템에서 무선통신 커버리지 이중화를 통한 통신 안정성 확보 (The Way to Ensure Safety of Communication by Means of Redundancy of Wireless Communication Coverage in RF-CBTC System)

  • 박주연;양희준;강덕원;이종성
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.3104-3110
    • /
    • 2011
  • This paper describes how to ensure safety of train by guaranteeing stable and continuous communication in RF-CBTC. CBTC System uses the wireless communication between onboard and wayside so that safety of wireless communication is the most important. Losing the position of train causes vital problem of train service. By losing the position of train, the other trains are blocked in the block and the train move by emergency mode so headway and safety cannot guaranteed. Therefore, safety is ensured by redundancy of wireless equipment. One of the ways to make redundancy is redundancy of equipment. However, the redundancy of equipment spends a lot of money to avoid interference in limited place like underground. Continuous communication is guaranteed by means of redundancy of wireless communication coverage to solve the problems even though one of the equipment is broken.

  • PDF

연속공정 자동화를 위한 전동기 그룹제어시스템의 개발 (Development of Mmotor Group Control System for Continuous Process Automation)

  • 조영조;오상록;최익;안현식;권순학;이준수;김광배;임준홍
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
    • /
    • pp.218-224
    • /
    • 1990
  • A motor group control system is developed for continuous manufacturing processes such as rolling process or electrolytic tinning process. The control system consists of four subsystems ; Multi-Function Controller (MFC), Flexible Motor Drive (FMD), Bulky Input/Output (BIO), Graphic Console and Simulator (GCS). A graphic control language, called Function Block Language, is used to configure the control algorithms for each subsystem. All subsystem are linked together thru a field bus to communicate data with each other.

  • PDF

Performance Evaluation of Buffer Management Schemes for Implementing ATM Cell Reassembly Mechanism

  • Park, Gwang-Man;Kang, Sung-Yeol;Lie, Chang-Hoon
    • 한국경영과학회지
    • /
    • 제22권2호
    • /
    • pp.139-151
    • /
    • 1997
  • An ATM switching system may be designed so that communications between processors of its control part can be performed via its switching network rather than a separate inter-processor communications (IPC) network. In such a system, there should be interfaces to convent IPC traffic from message format to cell format and vice versa, that is, mechanisms to perform the SAR (Segmentation And Reassembly) sublayer functions. In this paper, we concern the cell reassembly mechanism among them, mainly focussed on buffer management schemes. We consider a few alternatives to implement cell reassembly function block, namely, separated buffering, reserved buffering and shared buffering in this paper. In case of separated and reserved buffering, we employ a continuous time Markov chain for the performance evaluation of cell reassembly mechanism, judicially defining the states of the mechanism. Performance measures such as measage loss probability, mean number of message queued in buffer and average reassembly delay are obtianed in closed forms. In case of shared buffering, we compare the alternatives for implementing cell reassembly function block using simulation because it is almost impossible to analyze the mechanism of shared buffering by analytical modeling. Some illustrations are given for the performance analysis of the alternatives to implement cell reassembly function block.

  • PDF

상완 신경총 차단에 의한 척수성 중추통증의 완화 -증례보고- (Improvement of Spinal Central Pain by Brachial Plexus Block -A case report-)

  • 김옥선;이우용;유병훈;임윤희;김승오
    • The Korean Journal of Pain
    • /
    • 제19권2호
    • /
    • pp.241-243
    • /
    • 2006
  • Central pain is defined as pain associated with lesions of the central nervous system, and is among the most intractable of chronic pain syndromes. A 47 year-old-female, who had right arm and shoulder pain, was diagnosed with syringomyelia of the Arnold Chiari malformation type I and received foramen magnum decompression and a syringo-subarachnoid shunt. After the operation, the evoked pain was improved, but she complained of a continuous burning pain, coupled with cold and tactile allodynia. This symptom failed to fully subside on administration of oral medicine; therefore, brachial plexus block was performed, which relieved her pain transiently. Through repeated trials, a gradual decrease in the pain intensity and frequency was found. However, the way in which brachial plexus block improves spinal central pain is not completely known.