• Korean Journal of Environment and Ecology
• /
• v.24 no.4
• /
• pp.426-435
• /
• 2010

The present study attempts to compare the soil chemical characteristics and biological activities (i.e. microbial biomass and soil enzyme activities), and litter decomposition rate of Arundinella hirta and Miscanthus sinensis var. purpurascens) collected from serpentine and non-serpentine sites by litter bag techniques at serpentine and non-serpentine field experiment sites over a 9-month period. The serpentine soil showed higher pH and soil alkaliphosphatase activity, and lower soil dehydrogenase and urease activities than the non-serpentine soil. Microbial biomass-N at the serpentine soil was larger than the non-serpentine soil, although the microbial biomass-C and microbial biomass-N represented no significant difference between serpentine and non-serpentine soil. These results suggest that the larger microbial biomass-N caused the lower C/N in serpentine soil. At the end of the experiment, the litter samples of A. hirta and M. sinensis collected from serpentine soil revealed a 39.8% and 38.5% mass loss, and the litter sample from non-serpentine soil also showed a 41.1% and 41.7% mass loss at the serpentine site. On the other hand, at the non-serpentine site, 42.2%, 37.4%, and 46.8%, 44.8% were respectively shown. These results demonstrate that the litter decomposition rate is more intensely affected by the heavy metal content of leaf litter than soil contamination. Moreover, the litter collected from the serpentine soil had a lower C/N, whereas the litter decomposition rate was slower than the litter from the non-serpentine soil, because the heavy metal inhibition activities on the litter decomposition process were more conspicuous than the effect of litter qualities such as C/N ratio or lignin/N. The nutrient element content in the decomposing litter was gradually leached out, but heavy metals and Mg were accumulated in the decaying litter. This phenomenon was conspicuous at the serpentine site during the process of decomposition.

• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.87-97
• /
• 2018

The cesium (Cs) removal from the contaminated water system has been considered to be difficult because the cesium likes to exist as soluble phases such as ion and complexes than the solid in water system. Many researches have focused on developing the breakthrough adsorbent to increase the cesium removal efficiency in water. In this study, the laboratory scale experiments were performed to investigate the feasibility of the adsorption process using the bamboo charcoal for the Cs contaminated water system. The Cs removal efficiency of the bamboo charcoal were measured and the optimal adsorption conditions were determined by the adsorption batch experiments. Total 5 types of commercialized bamboo charcoals in Korea were used to identify their surface properties from SEM-EDS and XRD analyses and 3 types of bamboo charcoals having large specific surface areas were used for the adsorption batch experiment. The batch experiments to calculate the Cs removal efficiency were performed at conditions of various Cs concentration (0.01 - 10 mg/L), pH (3 - 11), temperature ($5-30^{\circ}C$), and adsorption time (10 - 120 min.). Experimental results were fitted to the Langmuir adsorption isotherm curve and their adsorption constants were determined to understand the adsorption properties of bamboo charcoal for Cs contaminated water system. From results of SEM-EDS analyses, the surfaces of bamboo charcoal particles were composed of typical fiber structures having various pores and dense lamella structures in supporting major adsorption spaces for Cs. From results of adsorption batch experiments, the Cs-133 removal efficiency of C type bamboo charcoal was the highest among those of 3 bamboo charcoal types and it was higher than 75 % (maximum of 82 %) even when the initial Cs concentration in water was lower than 1.0 mg/L, suggesting that the adsorption process using the bamboo charcoal has a great potential to remove Cs from the genuine Cs contaminated water, of which Cs concentration is low (< 1.0 mg/L) in general. The high Cs removal efficiency of bamboo charcoal was maintained in a relatively wide range of temperatures and pHs, supporting that the usage of the bamboo charcoal is feasible for various types of water. Experimental results were similar to the Langmuir adsorption model and the maximum amount of Cs adsorption (qm:mg/g) was 63.4 mg/g, which was higher than those of commercialized adsorbents used in previous studies. The surface coverage (${\theta}$) of bamboo charcoal was also maintained in low when the Cs concentration in water was < 1.0 mg/L, investigating that the Cs contaminated water can be remediated up with a small amount of bamboo charcoal.

• Journal of Food Hygiene and Safety
• /
• v.31 no.6
• /
• pp.458-464
• /
• 2016

Mulberry is considered a healthy food for antioxidants and many other beneficial nutrients. However, food safety concerns exist as this commodity scarcely passes through a sanitizing step due to the fragile nature of mulberry fruits. Fermented mulberry wort is one traditional way to utilize and preserve mulberries by mixing with sugars although hygienic practices are not often implemented. The purpose of this study was to investigate the fate of foodborne pathogens in fermented mulberry wort. Microbial population of inoculated E. coli in mulberry wort showed a decreasing pattern as the fermentation progressed. A quicker decrease was observed in the mulberry wort mixed with sugar at 1 to 0.8 ratio (w/w, mulberry: sugar) compared to 1 to 1 ratio, which could be due to the amount of acids generated during the fermentation process. When fully-fermented mulberry wort was contaminated with foodborne pathogens, they all decreased in population although their deceasing patterns varied depending on the species of tested bacteria. Steep deceases in population of inoculated foodborne pathogens were observed when the fermented wort was stored at $30^{\circ}C$ in comparisons to the other storage temperature, 5 and $20^{\circ}C$, regardless of bacterial species. This study necessitates the optimization of a sanitizing process during fermentation and storage of mulberry wort.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.4
• /
• pp.304-309
• /
• 2015

To evaluate the degree of contamination caused by oil spill accident in the sea, the in-situ sensors which are based on the scientific method are needed in the real site. The sensors which are based on the fluorescence detection theory can provide the useful data, such as the concentration of oil. However these kinds of sensors commonly are composed of the ultraviolet (UV) light source such as UV mercury lamp, the multiple excitation/emission filters and the optical sensor which is mainly photomultiplier tube (PMT) type. Therefore, the size of the total sensing platform is large not suitable to be handled in the oil spill field and also the total price of it is extremely expensive. To overcome these drawbacks, we designed the fluorimeter for the oil spill detection which has compact size and cost effectiveness. Before the detail design process, we conducted the experiments to measure the excitation and emission spectrum of oils using five different kinds of crude oils and three different kinds of processed oils. And the fluorescence spectrometer were used to analyze the excitation and emission spectrum of oil samples. We have compared the spectrum results and drawn the each common spectrum regions of excitation and emission. In the experiments, we can see that the average gap between maximum excitation and emission peak wavelengths is near 50 nm for the every case. In the experiment which were fixed by the excitation wavelength of 365 nm and 405 nm, we can find out that the intensity of emission was weaker than that of 280 nm and 325 nm. So, if the light sources having the wavelength of 365 nm or 405 nm are used in the design process of fluorimeter, the optical sensor needs to have the sensitivity which can cover the weak light intensity. Through the results which were derived by the experiment, we can define the important factors which can be useful to select the effective wavelengths of light source, photo detector and filters.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.201-210
• /
• 2008

The mixing treatment process using lime (CaO) and limestone ($CaCO_3$) as the immobilization amendments was applied for heavy metal contaminated filmland soils around Goro abandoned Zn-mine, Korea in the batch and pilot scale continuous column experiments. For the batch experiments, with the addition of 0.5 wt.% commercialized lime or limestone, leaching concentrations of As, Cd, Pb, and Zn from the contaminated filmland soil decreased by 70, 77, 94, and 95 %, respectively, compared to those without amendments. For the continuous pilot scale column experiments, the acryl column (30 cm in length and 20 cm in diameter) was designed and granulated lime and limestone were used. From the results of column experiments, with only 2 wt.% of granulated lime, As, Cd, and Zn leaching concentrations decreased by 63%, 97%, and 98%, respectively. With 2 wt.% of granulated limestone, As leaching concentration reduced from 135.6 to 30.2 ${\mu}g/L$ within 5 months and maintained mostly below 10 ${\mu}g/L$, representing that more than 46% diminution of leaching concentration compared to that without the amendment mixing. For Cd and Zn, their leaching concentrations with only 2 wt.% of limestone mixing decreased by 97%, respectively compared to that without amendment mixing, suggesting that the capability of limestone to immobilize heavy metals in the filmland soil was outstanding and similar to that of lime. From the column experiments, it was investigated that if the efficiency of limestone to immobilize heavy metals from the soil was similar to that of lime, the limestone could be more available to immobilize heavy metals from the soil than lime because of low pH increase and thus less harmful side effect.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.217-228
• /
• 2011

The feasibility study for the stabilization process using 5 amendments was performed to quantify As-immobilization efficiency in farmland soils around Samkwang abandoned mine, Korea. For the batch experiments, with 2% and 3% of granular lime(2-5 mm in diameter), leaching concentration of As from the soil decreased by 86% and 95% respectively, compared to that without the amendment. When 5% and 10% of granular limestone was added in the soil, As concentration decreased by 82% and 95%, showing that lime and limestone has a great capability to immobilize As in the soil. From the results of batch experiments, continuous column(15 cm in dimeter and 100 cm in length) tests using granular lime and limestone as amendments was performed. Without the amendment, As concentration from the effluent of the column ranged from 167 ${\mu}g$/L to 845 ${\mu}g$/L, which were higher than Korea Drinking Water Limit(50 ${\mu}g$/L). However, only with 1% and 2% of lime, As concentration from the column dramatically decreased by 97% for 9 years rainfall and maintained below 50 ${\mu}g$/L. With 5% of limestone and the mixed amendment(1% of lime + 2% of limestone), more than 95% diminution of As leaching from the column occurred within I year rainfall and maintained below 20 ${\mu}g$/L, suggesting that the capability of limestone to immobilize As in the farmland soil was outstanding and similar to that of lime. Results of experiments suggested that As stabilization process using limestone could be more available to immobilize As from the soil than using lime because of low pH increase and thus less harmful side effect.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.79-83
• /
• 2018

Purpose $^{18}F-FDG$, which is commonly used in PET-CT examinations, is low in capacity and it is difficult to keep the amount of radioactivity busy when the specific activity is high, increasing the amount of space dose and radioactive contamination in the distribution room. Therefore, while evaluating the actual dose administered to patients during the manual dispense process, the medical institution intends to assess the usefulness of the auto dispenser by comparing the differences from the actual dose administered to the patient using the new automatic dispense. Materials and Methods From July 2016 to December 2016, 846 patients were manually administered by workers using $^{18}F-FDG$ and $^{18}F-FDG$ 906 patients were using auto dispenser from July 2017 to December 2017. Results Capacity administered to patients during the manual dispense averaged $35.41{\pm}27.79%$ compared to the recommended dose, and the auto dispenser process showed a small difference of $-2.15{\pm}3.99%$ compared to the recommended dose(p<0.05). Conclusion Working people did not have to touch radioactive medicines directly while they were busy in the auto dispenser, and because of the availability of other tasks far away, the time and distance to receive the exposure were also advantageous. It is believed that future use by many medical institutions will not only reduce the dose to patients but also help reduce the exposure dose to workers.

• Clean Technology
• /
• v.29 no.1
• /
• pp.31-38
• /
• 2023

Due to water shortages caused by water pollution and climate change, total organic carbon (TOC) standards have been implemented for wastewater discharged from public sewage treatment facilities. Furthermore, there is a growing interest and body of research pertaining to the reuse of sewage treatment water as a secure alternative water resource. The membrane bio-reactor (MBR) method is commonly used for advanced wastewater treatment because it can remove organic and inorganic ions and it does not require or emit any chemicals. However, the MBR process uses a separation membrane (MF), which requires frequent film cleaning due to fouling caused by a high concentration of mixed liquor suspended solid (MLSS). In this study, process improvement and microbubble cleaning efficiency were evaluated to improve the differential pressure, water flow, and MF fouling, which are the biggest disadvantages of operating the MF. The existing MBR method was improved by installing a precipitation tank between the air tank and the MBR tank in which raw water was introduced. Microbubbles were injected into a separation membrane tank into which the supernatant water from the precipitation tank was introduced. The microbubble generator was operated with a 15 day on, 15 day off cycle for 5 months to collect discharged water samples (4L) and measure TOC. As the supernatant water from the precipitation tank flowed into the separation membrane tank, about 95% of the supernatant water MLSS was removed so the MF fouling from biological contamination was prevented. Due to the application of microbubbles to supernatant water from the precipitation tank, the differential pressure of the separation membrane tank decreased by 1.6 to 2.3 times and the water flow increased by 1.4 times. Applying microbubbles increased the TOC removal rate by more than 58%. This study showed that separately operating the air tank and the separation membrane tank can reduce fouling, and suggested that applying additional microbubbles could improve the differential pressure, water flow, and fouling to provide a more efficient advanced treatment method.

• Economic and Environmental Geology
• /
• v.45 no.3
• /
• pp.255-264
• /
• 2012

The stabilization using limestone ($CaCO_3$) and steel making slag as the immobilization amendments for Cu and Pb contaminated farmland soils was investigated by batch tests, continuous column experiments and the pilot scale feasibility study with 4 testing grounds at the contaminated site. From the results of batch experiment, the amendment with the mixture of 3% of limestone and 2% of steel making slag reduced more than 85% of Cu and Pb compared with the soil without amendment. The acryl column (1 m in length and 15 cm in diameter) equipped with valves, tubes and a sprinkler was used for the continuous column experiments. Without the amendment, the Pb concentration of the leachate from the column maintained higher than 0.1 mg/L (groundwater tolerance limit). However, the amendment with 3% limestone and 2% steel making slag reduced more than 60% of Pb leaching concentration within 1 year and the Pb concentration of leachate maintained below 0.04 mg/L. For the testing ground without the amendment, the Pb and Cu concentrations of soil water after 60 days incubation were 0.38 mg/L and 0.69 mg/l, respectively, suggesting that the continuous leaching of Cu and Pb may occur from the site. For the testing ground amended with mixture of 3% of limestone + 2% of steel making slag, no water soluble Pb and Cu were detected after 20 days incubation. For all testing grounds, the ratio of Pb and Cu transfer to plant showed as following: root > leaves(including stem) > rice grain. The amendment with limestone and steel making slag reduced more than 75% Pb and Cu transfer to plant comparing with no amendment. The results of this study showed that the amendment with mixture of limestone and steel making slag decreases not only the leaching of heavy metals but also the plant transfer from the soil.

• Journal of agricultural medicine and community health
• /
• v.1 no.1
• /
• pp.10-21
• /
• 1976

The traditional application of night soil to vegetable gardens and rice paddies results in a most wide spread condition of parasitism, with a variety of helminths found in Korea. In addition to the above fact, the peculiar habit of the consumption of raw vegetables, fish, crustaceans and mammals provides a means of infestations of helminths. During the last sixty years numerous reports were found on the prevalence of helminths amongst the Korean population in different parts of the country, and it was generally recognized that ascariasis, hookworm disease, filariasis, clonorchiasis and paragonimiasis constitute the important helminthic disease in Korea. In practical measures of parasite control activities the main measures are summarized as mass-treatment, night-soil disposal and transmission control. Among the three, the mass-treatment has been commonly applied, however, no reduction of transmission has been obtained by treatment of a population. Therefore, the ultimate eradication of parasites will depend upon the application of comprehensive environmental sanitation measures. The basic environmental measures will be concerned with (a) the safe disposal of human excreta, (b) the provision of adequate and safe water supplies in such a way as to promote a higher standard of personal hygiene in the population, and (c) the prevention of food contamination by faecal material. Additional environmental measures will deal with the improvement of housing and housing hygiene and with general community development. Community development means social and cultural as well as economic development. The control measures on the parasitic endemic diseases, such as clonorchiasis and paragonimiasis are the good examples for community health development in Korea. The control of Clonorchis and Paragonimus infections are theoretically very simple, as the infection can only invade the human body by way of encysted metacercaria which are taken into the body when eating passive intermediate hosts(fishes, crabs and crayfishes). Although prophylactic measures in the case of the infections deal with above merely consist the fishes in cooking or submerging in hot water before eating them, it is exceedingly difficult to carry out such simple measures in face of century old traditions, to which the relatively primitive population clings with great tenacity. There is no one universally applicable method of control. The choice of methods must be dictated by the nature of the environment. the habit and custom of the people. the pattern of transmission and the resources of the country. There must exist a well organized public health infrastructure. Since a control programme is of necessity on a longterm basis and continuity in its implementation is essential. An investigation should be made on the prevalence of the diseases and its relationships to irrigation engineering, freshwater ecology, agricultural methods, hydro-electric schemes, and the development of communities in affected areas. In conclusion, however. the control of clonorchiasis and paragonimiasis in Korea is not an impossible task. A combination of efforts with major emphasis on health education and mass chemotherapy coupled with governmental aid in enforcing legislative public health measures could reduce the diseases. Health education in particular attempts following four things: (a) It supplies a person with enough general knowledge about a disease to make the preventive measures. (b) It makes a person feel sufficiently about the importance of his own health to make him alter his behavior and adopt these preventive measure. (c) It makes him concerned for the health others. (d) It tries to make him feel so strongly about the first three that be supports and even initiates preventive action by the community. Educational efforts should be directed primarily toward school children because it is during the early years that most persons become infected, and also because children are less entrenched in their food habits so that, the educational process should be involved at various levels in successive changes of knowledge, attitude, beha viour, habit and custom of their lives. The most parasitic endemic diseases are related to community diseases. In caring for a sick community. the first stage is to gather epidemiological data, the next is to make inferences from it-to make the community diagnosis. The third is to prescribe community treatment or community health action part of a community health action programme. The community health action is the sum of the steps decided upon to remedy the critical features revealed by the community diagnosis. Action takes various forms; health education is the most important.