• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.8
• /
• pp.102-106
• /
• 2012

This paper was carried out to survey fire hazard and improvement at the drain pump in air-conditioners. Based on the results of analysis, the proposal of electrical accidents prevention and a construction improvement are as follows. A power connection of the drain pump has two types, an electrical outlet type and direct connection type at control board of air-conditioner. The electrical outlet types need a bulletin sign or education as malfunction of the drain pump include an additional accidents, current leakage and overflowing with water on the floor from breaker trip by exterior cause and breaker off by mistake of worker. On the other hand, the direct connection types prevent a power interruption as exterior cause, but it has some trouble, cut of ground cable and without protection device. Usually it doesn't work by electrician when air-conditioner and the drain pump power work. Therefore an education or countermeasures are recommended for not electrician. Generally malfunction of the drain pump causes accumulated materials into the tank. Even though the accumulated materials lead to an overheating and burning as failure of detector occur an idling, periodic inspection of the air-conditioner filter and the drain pump tank prevent the trouble.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.5 s.37
• /
• pp.251-258
• /
• 2005

In this paper, we investigate the strategy for the promotion of IT industry in Yongin region and suggest some directions for operations strategy of them. we divide the strategy into centralization of supporting facilities , construction of supporting network, development of lesion based firm, and modernization of marketing/logistics based on the result of the Previous study on the 19 critical success factors. The strategy foactors are analyzed by AHP and evaluated by the three groups(IT firms, local government official worker, professor) which have an influence on IT policy. This research contribute to assist planners and policy-makers in supporting IT industry by providing useful information about the suggested strategy, and by suggesting the effective means to assist the IT industry.

• Journal of architectural history
• /
• v.22 no.5
• /
• pp.7-22
• /
• 2013

Gimlyong-sa temple has played an important role of Buddhist culture in Gyeongsangdo Provinces(嶺南地域) in the late Joseon Dynasty as the 31st head temple(本山) in the Japanese occupation. There are lots of architectural documentary records remained nevertheless, most of cultural heritages are destroyed by fire in 1997. There were 85 articles in five kinds of books which contained historical achievements of Gimlyong-sa temple and hermitages(Daeseongam(大成庵), Hwajangam(華藏庵), Yangjinam(養眞庵), Geum seondae(金仙臺), Dosoram(兜率庵), Myeongjeogam(明寂庵)). It is possible to understand the five situational peculiarities in the 17~19th century. At the first, they were compiled in 1914 to around 1930 by Kwon Sangro(權相老) to clarify the historical facts. Second, confirmed the formation process of the foundation narrative. Third, the meaning of Seolseondang(設禪堂), Manseru(萬歲樓) and Hyangnojeon(香爐殿) were recorded, it is possible to look at the concept of people at that time. Fourth, the great masters portraits were enshrined in hermitages, not in Gimlyong-sa temple. It means that a hermitage is not for only self-discipline or living but assembly of religious orders(門派). Fifth, Chimgye(枕溪), the great Buddhist clergy and carpenter of Gimlyong-sa, was nationwide active worker in 19th century because he was also in a charge of investment manager for construction.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.211-215
• /
• 1984

Forty one male workers employed in an underwater construction field were surveyed in the viewpoints of epidemiological analysis of decompression sickness (caisson's disease). Nineteen out of the entire forty one workers have been, or had been suffering from decompression sickness (as 46.3% of incidence rate) after decompression. The results obtained were as follows: 1. There was a significant relation between duration of work and incidence of disease. 2. Type II (severe type) comprised majority of cases (16 cases, 84.2%) despite any significant correlations were not present between severity types and recompression times. 3. Most frequently cited symptoms were lower limb pain (89.5%), upper limb pain (79.0%), pruritus (68.4%) and so on, however, 10% of patients complained of neurological symptoms. 4. There were not any significant correlations between disease incidence and worker's age or relative body weight.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.1
• /
• pp.71-81
• /
• 2020

Enclosed pig house are creating an environment with high concentrations of gas and dust. Poor conditions in pig farms reduce pig weight and increase disease and accidents for livestock workers. In the pig house, the high concentration of harmful gas may cause asphyxiation accidents to workers and chronic respiratory disease by long-term exposure. As pig farm workers have been aging and feminized, the damage to the health of the harsh environment is getting serious, and real-time monitoring is needed to prevent the damage. However, most of the measuring devices related to humidity, harmful gas, and fine dust except temperature sensors are exposed to high concentrations of gas and dust inside pig house and are difficult to withstand for a long time. The purpose of this study is to develop an wearable based device to monitor the hazardous environment exposed to workers working in pig farms. Based on the field monitoring and previous researches, the measurement range and basic specifications of the equipment were selected, and wearable based device was designed in terms of utilization, economic efficiency, size and communication performance. Selected H₂S and NH₃ sensors showed the average error of 5.3% comparing to standard gas concentrations. The measured data can be used to manage the working environment according to the worker's location and to obtain basic data for work safety warning.

• Textile Coloration and Finishing
• /
• v.26 no.2
• /
• pp.106-113
• /
• 2014

Work-related falls are a major problem in the construction and roofing industries. To avoid serious injury to the worker caused by high decelerations or forces, different systems to absorb the energy of a fall are implemented in personal protective equipment. In this study, shock energy absorber lanyard protection tube was prepared using high tenacity PET fiber, P-aramid fiber, and UHMWPE fiber, respectively. Dynamic load test and static load test, bursting strength test based on the Korea fall protection equipment standard(Korea Occupational Safety & Health Agency standard 2013-13) or conformity European safety test(CE : EN355) were conducted. Especially maximum arrest force by dynamic load test of energy absorber showed below 6,000N.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.70-77
• /
• 2004

A Reasonable lighting should be provided for doing night work. All works far construction site can be exposed to potential hazard at night work The purpose of this study is to provide a standard of the lighting against accidents due to insufficient lighting at site. one pilot tea one at building work site, one at mad work site of it have been conducted for figuring out illumination change depending worker's activity direction, using lux checker to show it as numerical indication. The direction are changed with a range of 30, 60, 90, and 135 degree to be checked at site. Tests results show that $10\%\;and\;15\%$ of lighting could be decreased by changing the working direction of works at site. Therefore, steep slope place, cave work and backside of structural elements such as a column, deep beam should be considered for keeping sufficient and reasonable lighting. It is found that $50\%more$ illumination Lux needs f3r civil work than for building work.

• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.184-191
• /
• 2018

Background: Due to an increasing number of workers aged 50 years and above, the number of those employed is also on the rise, and those workers aged 50 and over has exceeded 50% of the total fatal occupational injuries. Therefore, it is necessary to implement the selection and concentration by identifying the characteristics of high-risk groups necessary for an effective prevention against and reduction of fatal occupational injuries. Methods: This study analyzed the characteristics of high-risk groups and the occupational injury fatality rate per 10,000 workers among the workers aged 50 and over through a multi-dimensional analysis by sex, employment status of workers, industry and occupation by targeting 4,079 persons who died in fatal occupational injuries from January 2007 to December 12. Results: The share of the workers aged 50 years and above is increasing every year in the total fatal occupational injuries occurrence, and the high-risk groups include 'male workers' by sex, 'daily workers' by worker's status, 'craft and related-trades workers' by occupation, and 'mining' by industry. Conclusion: The most frequent causal objects of fatal occupational injuries of the workers aged 50 years and above are found out to be 'installment and dismantlement of temporary equipment and material on work platforms including scaffold' in the construction industry and 'mobile crane, conveyor belt and fork lifts' in the manufacturing industry.

• Journal of Korean Academy of Nursing
• /
• v.46 no.1
• /
• pp.69-78
• /
• 2016

Purpose: The purpose of this study was to develop a wellness index for workers (WIW) and examine the validity and reliability of the WIW for assessing workers' wellness. Methods: The developmental process for the instrument included construction of a conceptual framework based on a wellness model, generation of initial items, verification of content validity, preliminary study, extraction of final items, and psychometric testing. Content validity was verified by 4 experts from occupational health nursing and wellness disciplines. The construct validity, convergent validity and discriminant validity were examined with confirmatory factor analysis. The reliability was examined with Cronbach's alpha. The participants were 494 workers from two workplaces. Results: Eighteen items were selected for the final scale, and the results of the confirmatory factor analysis supported a five-factor model of wellness with acceptable model fit, and factors named as physical emotional social intellectual occupational wellness. The convergent and discriminant validity were also supported. The Cronbach's alpha coefficient was .91. Conclusion: The results indicate that the WIW is a valid and reliable instrument to comprehensively assess workers' wellness, and to provide basic directions for developing workplace wellness program.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.169-172
• /
• 2008

Recently, landscape lighting is more and more installing in many places such as park, cultural heritages, large-scale structures, bridges, apartment, and so on. However, there is no the government-set official estimation for standard wages constructing luminaries for landscape lighting. The cost of construction is estimated based on the standard wages of related-similar installations such as internal lighting fixtures or the designer's subjective decision. Sometimes, it is overestimated or underestimated. In this paper, the fundamental process for estimating the standard wages constructing luminaries for landscape lighting is studied. The estimation method of standard wages constructing lighting fixtures was examined on the basis of the type and capacities of luminaries, installation places, type and shapes of installation auxiliary materials, worker's skill, and etc. As a result, some results obtained in this work were significantly, different with the standard wages for internal electric wiring published by Korea Electric Association. In the future, to improve the accuracy of the estimation of the standard wages for constructing luminaries for landscope lighting, detailed factors related to the installation condition and dimensions and types of luminaries should be considered.