• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.601-609
• /
• 2018

The Smart City Plan specifies that it should reflect the content of the Smart City Comprehensive Plan, which is the upper plan while presenting the basic direction, promotion strategy, service establishment and operation plans of a smart city construction project. However, there are not enough empirical studies on whether plan contents are systematically established according to smart city planning hierarchy. In this study, we are to use the social network analysis to find out the local government's smart city plan is actually highly connected to the Smart City Comprehensive Plan, a master plan at national level. To this end, we conducted a social network analysis on Gwangmyeong and Chuncheon, which were recently approved for smart city planning. First, 108 keywords were derived from the 2nd Smart City Comprehensive Plan, and the connectivity between these keywords and Smart City Planning was analyzed. The results of the social network analysis showed that the total connections of Smart City Planning in Gwangmyeong was 371, which was higher than 307 in Chuncheon, and the average degree of connection per keyword and network density were also higher in the Gwangmyeong Smart City Planning than the Chuncheon Smart City Planning. The results of the study showed that the Smart City Planning actually had a high connectivity with the Smart City Comprehensive Plan, and the keywords with high connection centrality were different for each local government. The result of this study can be used as a basis for judging whether there is a high correlation between plans.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.299-302
• /
• 2014

Due to the convergence between digital devices and the development of wireless communication technology, bit-signal sensor miniaturization, building an Electronic Medical Record (EMR) which is a digital version of a paper chart that contains all of a patient's medical history and the information of Electronic Health Record (EHR), Ubiquitous healthcare (u-Healthcare) that can monitor their health status and provide personal healthcare service anytime and anywhere. Also, the appearance of cloud computing technology is one of the factors that accelerate the development of u-healthcare service. However, if the individual information to be used maliciously during the u-healthcare service utilization, leads to serious problems directly related to the individual's life because if it goes beyond the level of simple health screening and treatment, it may not provide accurate and reliable healthcare services. For this reason, we analyzed a variety of security issues related to u-healthcare service in cloud computing environment and described about directions of secure health information sharing system construction. In addition, we suggest the future developmental direction for th activation of u-healthcare industry.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.215-229
• /
• 2019

This technical note describes the current status of Finnish radioactive waste disposal project which started to construct the repository for spent nuclear waste for the first time in the world. Finland started operating nuclear power plant in 1977 and is currently operating four nuclear power plants. After detailed site surveys started in 1993, Olkiluoto was finally selected by the parliament of Finland as the site for geological disposal in 2001 followed by a construction license in 2015. If the operating license is approved by the government in the 2020s, it would be the world's first case of geological disposal. In ONKALO, a site-specific underground research facility at the site of Olkiluoto, various studies were conducted to verify the safety of the repository. Finland uses the KBS-3 disposal concept, and Korea considers a similar disposal concept because of similar rock formations. The entire process in Finland including the operation status of intermediate and low-level waste disposal, site investigation and selection stages, and the latest rock mechanics and hydrogeological studies in ONKALO are presented. Suggestions for the radioactive waste disposal in Korea is given based on the Finnish case.

• Journal of Advanced Navigation Technology
• /
• v.23 no.4
• /
• pp.281-288
• /
• 2019

A Flight test is an important process that must be performed to maintain airworthiness in the aircraft lifecycle, including aircraft development and certification. Flight test can be conducted for the purpose of demonstrating or verifying compliance with the applicable standard. Results of the flight test air accident analysis confirm that it is caused by a combination of various factors as well as aircraft. The International Civil Aviation Organization recommends the establishment and implementation of a safety management system to prevent aircraft accidents, but it does not reflect the specificity of the flight test. As such, advanced countries are providing separate criteria to assist stakeholder in conducting flight test safety management. This study investigates and analyzes relevant regulations of advanced countries, in accordance with the construction of a national flight performance test site in Korea, and proposes government-level guidelines to help stakeholders develop their flight test operation manuals. The guidelines discuss topics such as organizational composition, safety and risk management, flight operation, personnel management, and administrative issues.

• The Korean Journal of Archival Studies
• /
• no.49
• /
• pp.247-275
• /
• 2016

The classification scheme of records indicates a table that intends to express organic relations between records by organizing records and enabling internal order. Although the principles of organic classification have remained in traditional records management environment, they have been changed to "function and business" in the modern times. Therefore, Korea introduced a business reference model (BRM) based on function and business from 2008 and subsequently implemented its operation. However, it has been pointed out that the roles of the classification scheme of records have not been played because the analysis of "Danwigwaje," which belongs to the lowest level of business reference models, is poor. According to this indication, the Gangbuk District of Seoul Special City established a functional classification scheme by executing a business process analysis of "Danwigwaje." First, the record manager carried out analyses on the principles of "Danwigwaje," small function, and "Danwigwaje." Then, the functional classification scheme of "Danwigwaje" was modified by looking into the opinion inquiry process of the treatment department and performing a test operation. Through the case of the Gangbuk District in Seoul Special City, analytical procedures and methods of "Danwigwaje," as well as implications according to the establishment of a functional classification scheme of basic local governments, were arranged in a written format.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.3
• /
• pp.25-35
• /
• 2019

A laboratory test on uniaxial compressive strength was carried out by making 640 specimens in total, which were divided into two groups by their curing time of 7 and 28 days for 3 water content conditions of a water content at 100% saturation level and 10% and 20% increased water content from the state with clay, sand and gravel mixed grounds of 20 ground conditions of 4 types of stabilizer mixing conditions which were 8%, 10%, 12%, 14%, to understand laboratory strength characteristics for strength design of deep mixing ground. In case of clayey grounds, although the strength increased depending on the increase of stabilizer content, it showed to be analogous regardless of the curing time. And the impact on the strength development of deep mixing specimen according to water content was considered to be comparatively little compared to other grounds. For sandy grounds, the strength increment amount clearly showed to increase as stabilizer content increased, and also the increase of water content was determined to be decreasing the strength increment effect. For gravel mixed grounds, at 14% or over of stabilizer content, the effect on strength development was big making a large increase in strength, but compared to sandy grounds, the strength ratio depending on the curing time showed to be small.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.2
• /
• pp.41-56
• /
• 2019

Cloud manufacturing is a new concept of manufacturing process that works like a single factory with connected multiple factories. The cloud manufacturing system is a kind of large-scale CPS that produces products through the collaboration of distributed manufacturing facilities based on technologies such as cloud computing, IoT, and virtualization. It utilizes diverse and distributed facilities based on centralized information systems, which allows flexible composition user-centric and service-oriented large-scale systems. However, the cloud manufacturing system is composed of a large number of highly heterogeneous subsystems. It has difficulties in interconnection, data exchange, information processing, and system verification for system construction. In this paper, we derive the user requirements of various aspects of the cloud manufacturing system, such as functional, human, trustworthiness, timing, data and composition, based on the CPS Framework, which is the analysis methodology for CPS. Next, by analyzing the user requirements we define the system requirements including scalability, composability, interactivity, dependability, timing, interoperability and intelligence. We map the defined CPS system requirements to the requirements of oneM2M, which is the platform standard for IoT, so that the support of the system requirements at the level of the IoT platform is verified through Mobius, which is the implementation of oneM2M standard. Analyzing the verification result, finally, we propose a large-scale cloud manufacturing platform based on oneM2M that can meet the cloud manufacturing requirements to support the overall features of the Cloud Manufacturing CPS with dependability.

• Journal of The Korean Association For Science Education
• /
• v.39 no.2
• /
• pp.295-305
• /
• 2019

In previous study, visual representation competence taxonomy (VRC-T), which is composed of two dimensions, was developed for the purpose of promoting effective visual representation use and research in science education. In this study, elementary school students' visual representation competence for shadow phenomenon was investigated using VRC-T. In terms of visual representation competence, 'interpretation' was the highest score, followed by 'construction' and 'integration'. It also showed that students' visual representation competence was not high even after learning shadow-related units in the regular curriculum. On the other hand, text-based scientific knowledge was not correlated with all categories of visual representation competence. This indicates that there is a need to emphasize visual representation more in science class. Finally, hierarchical relationship among cognitive processes of VRC-T was explored according to ordering theory. If the tolerance level is somewhat loosened, a linear hierarchical relationship was found between the six cognitive processes. This suggests that VRC-T is an analytical framework that can be useful when designing assessment tools, tasks, and science class activities to enhance visual representation competence.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.355-363
• /
• 2021

The purpose of this research is to explore the selection attributes that the director of a taekwondo gym places importance on when purchasing a work of taekwon gymnastics for the competition. We conducted in-depth interviews with 6 participants using qualitative case study techniques, and analyzed data using Creswell's (2015) spiral analysis method. The data analysis results show music, trainees, characteristics of the work, criteria for evaluating the competition, producer competence, and price factors. As a result of the research, music should be produced around diverse and differentiated genres and music preferred by the trainees, and the appropriate theme should be selected considering the expressiveness and level of the trainees. The work should be considered creative works that harmonize the movement ratio of Taekwondo movements and dance, and the length of the work should be adjusted according to the purpose of the buyer, and the construction of the work should be based on the regulations of the competition. The manufacturer should ensure smooth communication with the buyer, including coaching ability and experience at the convention site. Prices will be affordable and affordable, and prices will need to be calculated based on special prices or mentoring periods for a small number of buyers.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.496-505
• /
• 2020

In the previous research, the effectiveness of resonator was confirmed through the numerical analysis on two cases with the use of existing resonator at the Mukho and Imwon ports located in the eastern coast of South Korea by discussing the reduction rates of 1983 Central East Sea tsunami, and 1993 Hokkaido Southwest off tsunami, respectively. In this study, the reduction rates of tsunami height with three different resonators, Type I, II-1, and II-2, at the Samcheok port were examined respectively through the numerical analysis using COMCOT model under the same condition as the previous study. It was discussed the spatial distribution of maximum height of tsunami, change of water level, and effectiveness of resonator with the presence of new types of resonator, and change of their sizes. As a result, the effectiveness of resonator was verified through the application of new types of resonator reducing about maximum 40% of tsunami height. In order to design the optimal resonator for the variety of site condition, it is necessary to research about the various cases applying different shape, arrangement, and size of resonator as further study.