• 한국시뮬레이션학회논문지
• /
• 제18권2호
• /
• pp.57-64
• /
• 2009

물리적 기반의 다이내믹 시뮬레이션에 있어서 안정적이고 효율적인 제한 시스템은 매우 중요한 요소 중 하나이다. 본 논문은 기존에 널리 사용되고 있는 제한 시스템들(Lagrange Multiplier method, Baumgarte stabilization method, Post-stabilization Method, Implicit constraint enforcement method, Fast projection method)에 대한 분석과 평가를 통해 제한 시스템을 사용하고자 하는 사용자들에게 적절한 선택을 할 수 있는 지침을 제공하고자 한다. 본 논문은 기존의 제한 방법들에 대한 수학적 수식들이 설명되어 있고, 제한 오차 비교, 계산 비용, 동적 움직임 분석 등을 통해 기존 제한 시스템들 각각에 대한 평가를 제공한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.376-382
• /
• 1991

In the analysis of constrained holonomic systems, the Lagange multiplier method yields a system of second-order ordinary differential equations of motion and algebraic constraint equations. Conventional holonomic or nonholonomic constraints are defined as geometric constraints in this paper. Previous works concentrate on the geometric constraints. However, if the total energy of a dynamic system can be computed from the initial energy plus the time integral of the energy input rate due to external or internal forces, then the total energy can be artificially treated as a constraint. The violation of the total energy constraint due to numerical errors can be used as information to control these errors. It is a necessary condition for accurate simulation that both geometric and energy constraints be satisfied. When geometric constraint control is combined with energy constraint control, numerical simulation of a constrained dynamic system becomes more accurate. A new convenient and effective method to implement energy constraint control in numerical simulation is developed based on the geometric interpretation of the relation between constraints in the phase space. Several combinations of energy constraint control with either Baumgarte's Constraint Violation Stabilization Method (CVSM) are also addressed.

• 한국멀티미디어학회논문지
• /
• 제11권4호
• /
• pp.516-524
• /
• 2008

본 논문은 기존에 연구되지 않았던 옷의 독특한 특징들을 묵시적 제한방법을 사용하여 강력한 제한력으로 구현하는 새로운 모델링 방법을 제안한다. 기존의 명시적 제한방법인 Baumgarte 안정화 방법은 해에 빠르게 수렴하도록 하기 위해 사용자가 시뮬레이션에 따라서 값이 달라지는 안정화 변수 값을 선택해야 하고, 시뮬레이션의 시간 간격 사용에 있어서 안정화에 한계가 있는 단점들이 있다. 본 논문은 큰 시간 간격에도 안정적이고, 안정화 변수 값을 요구하지 않고, 물리적으로도 적합한 물체의 움직임을 보장하는 묵시적 제한방법을 사용한다. 또한 묵시적 제한 방법의 계산 복잡도는 Baumgarte 안정화 방법과 같다. 본 논문은 묵시적 제한방법의 수식과 제한의 오차 분석을 설명하였고 옷의 솔기, 단추, 옷 주름, 옷의 구김, 과잉 늘어짐 방지 등의 복잡한 옷의 요소들에 대한 모델링 방법을 제시하였다. 본 논문에서 제안된 방법은 외부 상황에 의해 각종 제한들이 자동적으로 설정되고 제거되어 계산 비용을 절약함과 동시에 옷의 독특한 특징들의 구현을 통해 현실감 있는 옷 시뮬레이션의 결과들을 얻었다.

• 대한토목학회논문집
• /
• 제26권4D호
• /
• pp.671-678
• /
• 2006

본 연구에서는 2개의 질량을 갖는 1/4 차량모델을 이용하여 차량-궤도-교량간의 동적상호작용 현상을 표현하기 위해 비선형 헤르츠 접촉스프링(Nonlinear Hertzian Contact Spring)과 비선형 접촉감쇠장치(Nonlinear Contact Damper)를 도입하였다. 또한, 차량에 작용하는 하중은 차량의 중량외에 임의시간단계의 차륜재하위치인 레일답면(즉, 주행로상의 접촉면)에서의 변위가 제한조건식(Constraint Equation)으로 가해졌다. 이 변위제한조건식은 Penalty방법(Penalty Method)에 의해 구현되었으며, 해의 안정화(Stabilization)를 위한 기법과 제한조건오차보정반력(Reaction from Constraint Violation)을 도입하였다. 또한, 차량의 피칭운동을 표현하고, 다양한 차량/열차를 모형화하기 위해서 1/4 차량모델의 차체 및 대차프레임 간을 강체연결 및 핀이 있는 강체연결조건으로 모형화하였다. 시간적분방법으로는 Newmark계열의 시간적분법이 사용되었으며, 해의 정확성 확보를 위해 국지적 오차평가에 근거한 적응적시간간격기법(Adaptive Time-Stepping Scheme)을 도입하였다. 이러한 적응적시간간격기법을 도입하여 동적해석에서 시간간격의 크기를 자동적으로 결정함으로써 동적해석에서의 해의 정확성을 확보하고 시간적분에 소요되는 계산비용을 감소시킬 수 있을 것으로 기대된다.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.320-327
• /
• 2005

A new mechanism for hyper redundant manipulator (HRM) is presented, which comprises of serially assembled compound three-bar linkages (CTL). The CTL mechanism has some unique properties. This paper presents the forward and inverse kinematics of this mechanism and shows the simulation of the HRM havig 9 CTL units. The recursive algorithm of the inverse kinematics that the author originally developed is employed. It is fast and stable ; moreover, it enables us to obtain a solution in which the end-point of the HRM is controlled by a portion of joints. It also presents the method of the dynamical analysis. There exist kinematical constraints in the proposed closed linkage mechanism. In the dynamic analysis constraints are sufficiently sustained by the constraint stabilization method that the author developed. The mechanical structure of the HRM having some CTL units that is under construction is shown.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.91-98
• /
• 2004

In two dimensional incompressible flows, a preconditioning technique called Hierarchical Iterative Procedure(HIP) has been implemented on a stabilized finite element formulation. The stabilization has been peformed by a modified residual method proposed by Illinca et. al.[3]. The stabilization which is necessary to escape from the LBB constraint renders an equal order formulation. In this paper, we increased the order of interpolation whithin an element up to cubic. The conjugate gradient squared(CGS) method is used for the outer iteration, and the HIP for the preconditioning for the incompressible Navier-Stokes equation. The hierarchical elements has been used to achieve a higher order accuracy in fluid flow analyses, but a proper efficient iterative procedure for higher order finite element formulation has not been available so far. The numerical results by the present HIP for the lid driven cavity flow showed the present procedure to be stable, very efficient and useful in flow analyses in conjunction with hierarchical elements.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.87-94
• /
• 2001

In multibody dynamics, differential and algebraic equations which can satisfy both equation of motion and kinematic constraint equation should be solved. To solve this equation, coordinate partitioning method and constraint stabilization method are commonly used. The coordinate partitioning method divides the coordinate into independent and dependent coordinates. The most typical coordinate partitioning method arc LU decomposition, QR decomposition, projection method and SVD(sigular value decomposition).The objective of this research is to find a efficient coordinate partitioning method in flexible multibody systems and a hybrid decomposition algorithm which employs both LU and projection methods is proposed. The accuracy of the solution algorithm is checked with a slider-crank mechanism.

• 대한기계학회논문집A
• /
• 제21권8호
• /
• pp.1311-1321
• /
• 1997

In multibody dynamics, differential and algebraic equations which can satisfy both equation of motion and kinematic constraint equation should be solved. To solve these equations, coordinate partitioning method and constraint stabilization method are commonly used. In the coordinate partitioning method, the coordinates are divided into independent and dependent and coordinates. The most typical coordinate partitioning method are LU decomposition, QR decomposition, and SVD (singular value decomposition). The objective of this research is to find an efficient coordinate partitioning method in the dynamic analysis of flexible multibody systems. Comparing two coordinate partitioning methods, i.e. LU and QR decomposition in the flexible multibody systems, a new hybrid coordinate partitioning method is suggested for the flexible multibody analysis.

• 한국철도학회논문집
• /
• 제5권3호
• /
• pp.174-180
• /
• 2002

In multibody dynamics, DAE(Differential Algebraic Equations) that combine differential equations of motion and kinematic constraint equations should be solved. To solve these equations, either coordinate partitioning method or constraint stabilization method is commonly used. The most typical coordinate partitioning methods are LU decomposition, QR decomposition, and SVD(singular value decomposition). The objective of this research is to suggest a hybrid coordinate partitioning method in the dynamic analysis of multibody systems containing singular configurations. Two coordinate partitioning methods, i.e. LU decomposition and QR decomposition for constrained multibody systems, are combined for a new hybrid coordinate partitioning method. The proposed hybrid method reduces the simulation time while keeping accuracy of the solution.

• 한국전산유체공학회지
• /
• 제9권3호
• /
• pp.57-65
• /
• 2004

The incompressible Navier-Stokes equations in two dimensions are stabilized by a modified residual method, and then discretized by hierarchical elements. The stabilization is necessary to escape from the Ladyzhenskaya-Babuska-Brezzi(LBB) constraint and hence to achieve an equal order formulation. To expedite a standard iterative method such as the conjugate gradient squared(CGS) method, a preconditioning technique called the Hierarchical Iterative Procedure(HIP) has been applied. In this paper, we increased the order of interpolation within an element up to cubic. The hierarchical elements have been used to achieve a higher order accuracy in fluid flow analyses, but a proper efficient iterative procedure for higher order finite element formulation has not been available so far The numerical results by the present HIP for the lid driven cavity flow and others showed the present procedure to be stable, very efficient and useful in flow analyses in conjunction with hierarchical elements.