• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.1-9
• /
• 1995

The processing paper has devoted to the theory of the flow equations, the basic derivative procedure, the meaning of a valve flow coefficient $C_v$, the valve Reynolds R$R_{ev}$ and its application for liquid control valves, which applicable under the condition of a non-critical flow and the case of piping geometry factor $F_p$=1.0. However there is no information on the effects of fittings, a critical flow and the flow resistance coefficient of a valve equivalent to that of pipe which is conveniently used in the piping design. Since the piping systems of plants or ships generally contain various fittings such as expanders and reducers due to different size between pipes and valves and there may occur a critical flow, that a mass flowrate is maintained to be constant, due to the pressure drop in a piping when a liquid is initially maintainder ar a saturated temperature or at nearby corresponding to upstream pressure, system designer should have a knowledge of the effect to flow due to fittings and the critical flow phenomenon of a liquid. This study is performed to inform system designers with the critical flow phenomenon of a liquid, a valve resistance coefficient, a valve geometry factor and their applications.

• Journal of Chest Surgery
• /
• 제21권2호
• /
• pp.246-253
• /
• 1988

An in vitro model providing with a recirculating perfusion apparatus using an isolated canine heart and its autogenous blood, which was prepared for study of myocardial protection method. This apparatus was easily used by quick connect system and maintained well heart function for about 2 hours. The Langendorff perfusion was initiated for a 10 minute period by introducing perfusate at 37` into the aorta from aortic reservoir located 100 cm above the heart. The isolated perfused working canine heart model was a left heart preparation in which oxygenated perfusion medium [at 37K] entered the cannulated left atrium at a constant flow rate [900ml/ min] under 20 mmHg overflow system and was spontaneously ejected[no electrical pacing] via an cannula against a hydrostatic pressure of 80 cm H2O. During this working period, various indices of cardiac function were measured. The cardiac functions were stable for over 2 hours with perfusion of Krebs-Henseleit solution and autologous blood[1:1] mixture in volume and maintained heart rate ]]3-122/bpm peak systolic pressure 109-113 mmHg, cardiac output 900 ml / min and left atrial mean pressure 8-9 mmHg. In this model, the efficiency of myocardia] protection could be easily measured by means of functional, enzymatic, biochemical and ultrastructural assessment. And also, we believe this model to be a useful assessment screening model of recovery state after long duration of myocardial preservation of donor heart without difficult transplantation procedures.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.157-164
• /
• 2008

The temperature-entropy diagram of water or vapor displays graphically the thermophysical properties, so it is very conveniently used in various thermal systems. On general T-s chart of water, there are temperature, pressure, quality, specific volume, specific enthalpy, specific entropy. However, various state and process values besides above properties can be plotted on T-s diagram. In this study, we developed the software drawing twenty six kinds of properties, that is temperature, pressure, quality, specific volume, specific internal energy, specific enthalpy, specific entropy, specific exergy, exergy ratio, density, isobaric specific heat, isochoric specific heat, ratio of specific heat, coefficient of viscosity, kinematic coefficient of viscosity, thermal conductivity, prandtl number, ion product, static dielectric constant, isentropic exponent, velocity of sound, joule-thomson coefficient, pressure coefficient, volumetric coefficient of expansion, isentropic compressibility, and isothermal compressibility. Also, this software can analyze and print the system values of mass flow rate, volume flow rate, internal energy flow rate, enthalpy flow rate, entropy flow rate, exergy flow rate, heat flow rate, power output, power efficiency, and reversible work. Additionally, this software support the functions such as MS-Power Point.

• 한국진공학회지
• /
• 제18권6호
• /
• pp.411-417
• /
• 2009

차세대 반도체 및 디스플레이 산업용 드라이펌프의 배기속도를 평가하기 위해 최소부피 22 L 급의 정적형 유량계를 설계/제작 하였다. 정적형 유량계의 기본 평가항목인 base pressure와 leak rate 측정결과 각각 $6{\times}10^{-8}\;mbar$ 와 $1.5{\times}10^{-6}\;mbar-L/s$로 측정되었고 throughput limit의 경우 기존 875 L 급보다 1 order 낮은 $1{\times}10^{-3}\;mbar-L/s$ 영역까지 확대되었음이 확인되었다. 구축된 시스템을 이용해 배기용량이 적은 최신 공정 드라이 펌프까지도 배기속도 값을 정확히 측정할 수 있으며, 구축비용이 높은 정압형 유량계를 어느 정도 대체할 수 있을 것으로 기대하고 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권7호
• /
• pp.929-935
• /
• 2014

본 논문에서는 선내 제어실 및 Web에서 고속의 선박엔진성능분석용 압력 모니터링이 가능한 시스템을 구현하고자 한다. 이 시스템은 압력센서, 다채널 A/D 변환기가 내장된 감시모듈, TCP/IP 및 무선 인터넷 통신시스템으로 구성되고, 저가형이면서 국산화 개발에 목표를 둔 것이다. 기존 국산 제품은 가장 먼저 폭발하는 실린더의 피스톤이 상사점(TDC, Top dead center)에 도달하는 순간에 그 실린더의 압력을 측정하고, 이어서 실린더 개수만큼 등분된 회전 각도가 지난 시점마다 차례대로 다음 실린더의 압력을 수동으로 측정하는 방식이고, 제안된 방식은 각 엔진마다 압력센서를 설치하고 이를 감시모듈에서 실시간으로 계측한 후 통신에 의해 현장 제어실 PC나 Web 상에서 실시간 모니터링이 되도록 구현한다. 제안한 방식을 이용하면 최초에 폭발하는 TDC 점뿐만 아니라 나머지 실린더의 TDC 점을 실시간으로 정확히 계측하는 것이 가능하고, 각 TDC에 동기 되는 각 실린더 내의 압력 측정이 가능하여 선박엔진성능분석의 정밀도를 높일 수 있다. 또한, 실린더의 최대압력(Pmax)과 TDC 편차 및 연소상태와 같은 엔진의 다양한 진단에 사용될 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1194-1205
• /
• 2005

The common-rail injection systems, as a new diesel injection system for passenger car, have more degrees of freedom in controlling both the injection timing and injection rate with the high pressure. In this study, a piezo-driven injector was applied to a high pressure common-rail type fuel injection system for the control capability of the high pressure injector's needle and firstly examined the piezo-electric characteristics of a piezo-driven injector. Also in order to analyze the effect of injector's needle response driven by different driving method on the injection, we investigated the diesel spray characteristics in a constant volume chamber pressurized by nitrogen gas for two injectors, a solenoid-driven injector and a piezo-driven injector, both equipped with the same injection nozzle with sac type and 5-injection hole. The experimental method for spray visualization was based on back-light photography technique by utilizing a high speed framing camera. The macroscopic spray propagation was geometrically measured and characterized in term of the spray tip penetration, spray cone angle and spray tip speed. For the evaluation of the needle response of the above two injectors, we indirectly estimated the needle's behavior with an accelerometer and injection rate measurement employing Bosch's method was conducted. The experimental results show that the spray tip penetrations of piezo­driven injector were longer, on the whole, than that of the solenoid-driven injector. Besides we found that the piezo-driven injector have a higher injection flow rate by a fast needle response and it was possible to control the injection rate slope in piezo-driven injector by altering the induced current.

• 한국방재학회 논문집
• /
• 제9권5호
• /
• pp.63-68
• /
• 2009

본 연구에서 물 흐름에 일정한 농도로 포 소화약제를 정확하게 혼합하는 포 소화설비용 소화약제 혼합장치의 성능향상을 위하여 포소화약제의 정량 혼합특성을 분석하였다. 펌프, 탱크, 압력계, 유량계, 노즐로 구성되는 성능평가 시스템을 사용하여 개발된 프로포셔너의 성능이 실험적으로 평가하였다. 결과적으로 라인프로포셔너의 포소화약제 혼합성능은 벤츄리 효과에 의한 물유량 증가와 오리피스 단면적 증가에 따라 증가하고 오차율 $\pm4%$이내의 범위에서 물 유량과 포소화약제 양의 혼합농도 3%의 성능을 보였다. 프레셔프로포셔너의 경우 물 유량 증가와 입구압력 증가에 따라 혼합성능이 증가하고 오차율 $\pm2%$이내의 범위에서 물 유량과 포소화약제 양의 혼합농도 3%의 성능으로 분석되었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.333-335
• /
• 2003

Deep Ocean Water is formed within restricted area including polar sea (high latitude) by cooling of surface seawater and globally circulated in the state of insolation with surface seawater. Although not as obvious as estuaries mixing, Brine groundwater is mixture of recirculated seawater and groundwater. Seawater having high osmotic pressure infiltrate into unconfined aquifer where is connected to the sea. The ions dissolved in seawater are present in constant proportions to each other and to the total salt content of seawater. However deviation in ion proportions have been observed in some brine groundwater. Some causes of these exception to the Rule of constant proportions are due to many chemical reactions between periphery soil and groundwater. While Deep Ocean Water (DOW) have a large quantity of functional trace metals and biological affinity relative to brine groundwater, DOW have relatively small amount of harmful bacteria and artificial pollutants.

• 대한기계학회논문집B
• /
• 제41권9호
• /
• pp.563-570
• /
• 2017

본 연구에서는 이차목 디퓨저의 배압에 따른 특성과 디퓨저 내부의 유동을 확인하기 위해서 실험과 수치해석을 통하여 살펴보았다. 디퓨저의 배압($P_a$)조건을 모사하기 위해 이젝터를 사용하였으며, 디퓨저와 이젝터는 상온 고압기체질소를 사용하였다. 그 결과, 노즐전단압력($P_0$)이 동일할 때 배압($P_a$)을 낮추어 압력비($P_0/P_a$)를 높게 할수록 압력회복이 디퓨저 후단에서 이루어짐을 확인하였다. 노즐전단압력($P_0$)이 다르더라도 압력비($P_0/P_a)$가 동일하다면 디퓨저 내부의 유동특성이 거의 동일함을 확인하였으며, 시동압력비($(P_0/P_a)_{st}$) 또한 일치함을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2032-2037
• /
• 2007

Numerical analysis was conducted to investigate the atomic layer deposition(ALD) of silicon nitride using silane and ammonia as precursors. The present study simulated the surface reactions for as-deposited $Si_3N_4$ as well as the kinetics for the reactions of $SiH_4$ and $NH_3$on the semiconductor wafer. The present numerical results showed that the ALD process is dependent on the activation constant. It was also shown that the low activation constant leads to the self-limiting reaction required for the ALD process. The inlet and wafer temperatures were 473 K and 823 K, respectively. The system pressure is 2 Torr.