• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.18-25
• /
• 2008

The paper presents a modeling of the grid-connected wind turbine generation system on MATLAB/Simulink and aims to perform simulations for analysis of the system's characteristics. It performs a pitch regulation for control of the wind generator's output with respect to wind speed variation, and presents a relationship between interconnecting transformer's connections and fault current by reviewing the variations of fault current according to transformer connections in a grid-connected wind power generation system. It also investigates the effect of grounding methods of the interconnecting transformer's neutral point on fault current variations. The simulation results show the differences of fault currents, voltages and generator's characteristics for a line-to-ground fault according to interconnecting transformer's four different connections, and the differences of fault currents of the system according to grounding methods of the transformer neutral point. Therefore, the case studies demonstrate the effectiveness of the proposed simulation model on Simulink.

• Journal of KIISE:Software and Applications
• /
• v.33 no.11
• /
• pp.915-922
• /
• 2006

Recently, the requirements of the embedded software are getting diverse as the diversity of embedded software application fields increases. The systematic development methods are issued to deal with the dependency between hardware and software. However, the existing development methods have not considered the software's close connection to hardware and the high-level reusability for common requirements of several similar domains. In this paper, we propose a design method of development process model of product lines to support an efficient development method for embedded software. For this, we firstly suggest a domain scoping method and an IDEF0(Integration DEFinition)-based business model for extracting the efficient requirements. Next, we present a component deriving method based on the service architecture and an architecture design method after considering the hardware dependency. And we explain the artifacts of MSDFS(Multi Sensor Data Fusion System) at each design step in order to show how the proposed model can be applied to the embedded software development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3455-3461
• /
• 2015

LTE and Wi-Fi networks provide wireless communication services to passengers in subway where the number of network access fluctuates according to passenger movement. While the number of network access increase, LTE can provide stable communication service but Wi-Fi suffers temporal access delay to network. This paper analyzes the increase in access delay of Wi-Fi network according to increasing user in subway section by making mathematical modeling of Wi-Fi network and simulation study. The access delay characteristics of Wi-Fi network is measured along an subway line and the results are compared to the theoretical study. These results can be applied to the connection method to build an efficient network structure between LTE and Wi-Fi interworking network and the future introduction of LTE-R.

• Research in Plant Disease
• /
• v.11 no.1
• /
• pp.85-87
• /
• 2005

In July 2003, a destructive stem rot occurred sporadically in an exhibition farm on Aster glehni of Hamyanggun, Gyeongsangnam-do Agricultural Research and Extension Services, Korea. The typical symptoms of the disease were water-soaking, stem rot, wilt or blight. The infected plants were mostly died. White mycelial mats were spread over lesions and sclerotia were formed on stems and near soil line. The sclerotia were globoid or irregular in shape, 1~3 mm in size, and white to brown in color. The optimum temperature for fungal growth was about 30oC. Clamp connections were observed in the hyphae of the fungus grown on potato dextrose agar, and hyphal diameter was 3~8 ${\mu}m$. On the basis of mycological characteristics and test of pathogenicity to host plants, the fungus was identified as Sclerotium rolfsii. This is the first report on the stem rot of Aster glehni caused by S. rolfsii in Korea.

• Research in Plant Disease
• /
• v.9 no.1
• /
• pp.25-27
• /
• 2003

In 2002, a stem rot disease was found on Pansy (Viola tricolor) in several road-side flower beds in Jinju City, Gyeongnam province, Korea. The typical symptoms of the disease were stem rot, crown rot, wilt or blight. Upper parts of the infected stems were mostly blighted. White mycelial mats were spread over lesions and the sclerotia were farmed on the stems near soil line. The sclerotia was globoid or irregular in shape, 1.3~4.2 mm in size, and brown in color, The optimum temperature for fungal growth was about 3$0^{\circ}C$. The typical clamp connections were found in the hyphae of the fungus grown on PDA, and hyphal diameter was 3.9~10.4 ${\mu}{\textrm}{m}$. On the basis of mycological characteristics and pathogenecity test on host plants, the fungus was identified as Sclerotium rolfsii. This is the first report on the stem rot of Viola tricolor caused by Sclerotium rolfsii in Korea.

• Research in Plant Disease
• /
• v.18 no.1
• /
• pp.54-56
• /
• 2012

Sclerotium rot of sponge gourd occurred at the experimental field of Gyeongsangnam-do Agricultural Research and Extension Services in August 2010. The infected fruits showed water-soaked and rot symptoms. White mycelial mats spread over lesions, and then sclerotia were formed on fruit and near soil line. The sclerotia were globoid in shape, 1-3 mm in size and white to brown in color. The optimum temperature for mycelial growth and sclerotia formation on PDA was $30^{\circ}C$ and the hyphal width was 4-8 ${\mu}m$. The typical clamp connections were observed in the hyphae of the fungus grown on PDA. On the basis of mycological characteristics, ITS rDNA sequence analysis, and pathogenicity to host plants, this fungus was identified as Sclerotium rolfsii Saccardo. This is the first report of sclerotium rot on sponge gourd caused by S. rolfsii in Korea.

• Research in Plant Disease
• /
• v.18 no.2
• /
• pp.139-141
• /
• 2012

Stem rot symptoms of common bean occurred sporadically in Jinju, Korea. The typical symptom included water-soaking on the main stem, rotting, wilting, and blighting, which eventually leads to death of the plant. The sclerotia, white to brown, spherical with size of 1-3 mm, formed over lesions and surface soil line. The optimum temperature for mycelial growth and sclerotia formation was $30^{\circ}C$ on potato dextrose agar (PDA). The typical clamp connections were observed in the hyphae of the fungus grown on PDA. Mycological characteristics and pathogenicity to host plants indicated that the fungus was Sclerotium rolfsii Saccardo. This is the first report of stem rot on common bean caused by S. rolfsii in Korea.

• The Korean Journal of Mycology
• /
• v.29 no.2
• /
• pp.131-133
• /
• 2001

A destructive collar rot disease was found on broad bean (Vicia faba) in several farmer's field located in Changseon-myon, Namhae-gun, Gyeongsangnam-do in 2001. The typical symptoms of the disease were stem rot, crown rot, wilt or blight. Upper parts of the infected stems were mostly blighted and white mycelial mats were spread over lesions and the sclerotia were formed on the stems near soil line. The infection rates of the disease in the surveyed area were ranged from 28.6 to 42.8%. The sclerotia of the fungus readily formed in artificial media such as PDA at $30^{\circ}C$ and its shape was globoid or irregular and size was $1.0{\sim}3.7{\times}1.0{\sim}2.8\;mm\;(av.\;1.0{\sim}2.3\;mm)$ and was brown or dark brown in color. The optimum temperature for growth of the fungus was about $30^{\circ}C$. The typical clamp connections were found in the hypha of the fungus grown on PDA. On the basis of mycological characteristics and pathogenecity test on host plants, the fungus was identified as Sclerotium rolfsii. This is the first report on the collar rot of broad bean caused by Sclerotium rolfsii in Korea.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.81-97
• /
• 2013

The purpose of this study is to summarize systematically and understand the characteristics of the production process of whole garments in order to develop knitwear using a real whole garment machine and propose this as a development case for high value added knitwear design. Concerning research methods, the study looked at existing research into whole garment knitwear and relevant data, data on websites, and the whole garment knitting machine made by Shima Seiki, a Japanese company, which has been the most commonly used machine in Korea. Also the study collected program data concerning a knitting machine and knitting by participating in the production process of whole garment knitwear, and the production line was filmed directly. In addition, the study conducted research into the development of knitwear design using the SWG-X 12 gauge. The conclusions obtained from the production process of whole garments and product development include the following. First, whole garment knitwear is appropriate for expressing a sophisticated look that makes the body appear to be in one form through natural connection without any seam allowance. Second, it is very suitable for response production since it does not go through the pattern, cutting, and processing stages. Furthermore, because of the consistent management of the entire process by computer control, it may be the highest cutting-edge fashion area in which planning and proposal style industry may be realizable. Third, it is easy to approach design through a programming process, and it is possible to develop diverse patterns; thereby, it is appropriate for producing high value added knitwear products.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.391-400
• /
• 2008

There has been increasing interest in developing Structure Health Monitoring(SHM) system based on wireless sensor network(WSN) due to recent advancement in sensor network technologies. SHM is the continuous monitoring of the condition such a acceleration or load of a structure. The SHM system works, which measure key structure parameters systematically, provide information in evaluation of structure integrity, durability and reliability. Currently SHM system collects data via analog sensor and then sends to analysis application through the wired network. The wire system support high accuracy, but suffers the disadvantages in installation costs, complexity of connection and loss of line. It's also difficult to add new sensor nodes. We design and implement the SHM system based on WSN technology to solve those problems.