• 한국인터넷방송통신학회논문지
• /
• 제9권3호
• /
• pp.75-81
• /
• 2009

본 논문에서는 객체 지향 설계 정보를 이용한 컴포넌트 기반 모델링 방법을 제안한다. 클러스터링, 캡슐화, 상속성 개념과 같은 재사용성과 확정성을 향상시키는 객체지향 기술을 기반으로 기존에 개발된 객체 정보를 이용하여 추상화함으로서 정보간 관계를 단순화, 명세화 한다. 또한 정보관계의 이해를 지원할 수 있도록 정보관계 추상화 방법을 제시하고, 특정 도메인에 관계없이 시스템 레벨에서 지원하는 공통적인 서비스들을 재사용 단위로 가공하여 시스템 서비스 컴포넌트로 구분하여 모델링 할 수 있다. 이를 통해 재사용성과 확장성을 실현할 수 있으며 개발기간 단축과 품질 향상을 이룰 수 있다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권4호
• /
• pp.229-236
• /
• 2005

This paper presents a system level architecture evaluation technique that leverages transaction level modeling but also significantly extends it to the realm of system level performance evaluation. A major issue lies with the modeling effort. To reduce the modeling effort the proposed technique develops the concept of worst case scenarios. Since the memory controller is often found to be an important component that critically affects the system performance and thus needs optimization, the paper further addresses how to evaluate and optimize the memory controllers, focusing on the test environment and the methodology. The paper also presents an industrial case study using a real state-of-the-art design. In the case study, it is reported that the proposed technique has helped successfully find the performance bottleneck and provide appropriate feedback on time.

• 한국항해항만학회지
• /
• 제31권4호
• /
• pp.309-315
• /
• 2007

We've investigated the characteristics on mariner's behavior in the collision situation through a full-mission ship handling simulator and considered that it's necessary to model the standard avoiding behavior of mariners in order to apply the obtained results more widely and effectively. Thus we described the contents of standard avoiding behavior taken by mariners in the collision situation and established the concept of the standard model based on human factors for collision avoidance in a previous study. As a following study, this paper is to propose the method of modeling on mariners' standard behavior for collision avoidance by analyzing the contents of mariner's information processing and the related factors using regression analysis. As a result, we confirmed the influence of relating factors to avoiding behavior in mariner's deciding decisions and proposed the modeling method of mariners' standard behavior for collision avoidance with a example of recognition model.

• 대한조선학회논문집
• /
• 제30권3호
• /
• pp.90-99
• /
• 1993

선체 구조해석에서 유한요소의 활용에 따라 3차원적인 모델이 필요하게 되었으나 선체구조는 매우 복잡하고 주문생산에 따른 선체규격의 상이함에 의해 유한요소 모델링에 어려움이 많다고 할 수 있다. 유한요소 소프트웨어에서 제공하는 pre-processor나 geometric modeler를 활용하여 모델링을 짧은 시간내 편리하게 하기 위해서는 DB에 저장된 설계 데이타로 부터 요소형성에 긴요한 데이타들을 추출하여 사용할 필요가 있게 된다. 본문에는 engineering database의 부분적인 구현 예로서, 설계-해석 자동화의 한 분야인 유한요소 모델링에 필요한 내용들이 설계 데이터로 부터 추출되어 관계형 데이타 테이블로 정형화되는 과정이 개념적으로 나타나 있다.

• 한국군사과학기술학회지
• /
• 제21권6호
• /
• pp.865-876
• /
• 2018

This study focuses on the operating requirements of multi-resolution modeling(MRM) in training war-game model and proposes solutions for major issues of multi-resolution interoperation between Combat21 model and tank multi-purpose simulator(TMPS). We study the operating requirements of MRM through interviews with defense M&S experts and literature surveys and report the various issues that could occur with low-resolution model Combat21 and high-resolution model TMPS linked, for example, when to switch objects, what information to exchange, what format to switch to, and how to match data resolutions. This study also addresses the purpose and concept of training using multi-resolution interoperation, role of each model included in multi-resolution interoperation, and issue of matching damage assessments when interoperated between models with different resolutions. This study will provide the common goals and directions of MRM research to MRM researchers, defense modeling & simulation organizations and practitioners.

• Design & Manufacturing
• /
• 제16권3호
• /
• pp.22-27
• /
• 2022

The demand for new processing technology that can improve productivity is increasing in industries that require large-scale and various products. In response to this demand, a robot machining system with flexibility is required. Because of the low rigidity of the robot, the robot machining system has a large error during machining and is vulnerable to vibration generated during machining. Vibration generated during machining deteriorates machining quality and reduces the durability of the machine. To solve this problem, a stage for fixing the spindle during machining is required. In order to compensate for the robot's low rigidity, a system combining a piezoelectric actuator for generating a large force and a guide mechanism to actuate with a desired direction is required. Since the rigidity of flexible hinges varies depending on the structure, it is important to optimal design the flexible hinge and high-rigidity system. The purpose of this research is to make analytic model and optimize a flexible hinge and to design a high rigidity stage. In this research, to design a flexible hinge stage, a concept design of system for high rigidity and flexure hinge modeling is carried out. Based on analytic modeling, the optimal design for the purpose of high rigidity is finished and the optimal design results is used to check the error between the modeling and actual simulation results.

• 한국간호교육학회지
• /
• 제19권1호
• /
• pp.87-96
• /
• 2013

Purpose: Competency-based curriculum has attracted many nursing institutions' attention, pursuing the enhancement of competency and the quality of education. The goal of this study was to not merely scrutinize the nomenclature of competency and competency model as a concept of pedagogy as well as nursing science, but also form a well understanding of development process for nursing competency-based curriculum and nursing competency modeling. Methods: A comprehensive review on related literatures was conducted in each section of 1) competency-based curriculum, 2) competency and competency model, and 3) contents of competency. Results: The nomenclature of competency including nursing competencies, competency modeling and competency-based curriculum were clarified and summarized. Through analyzing and reviewing former studies related to competency, desirable nursing competency modeling and nursing competency-based curriculum were proposed and described. Conclusion: Learner-centered curriculum should be established based on nursing education that emphasizes intellectual skills acquisition and the enhancement of future-oriented professionalism. Competency modeling should reflect the fact that teaching-learning strategies should focus on the integration of nursing theories and clinical practices. Nursing competency modeling is essential in order to develop a genuine competency-based curriculum while in-depth practical research should be followed so that nursing theories and clinical practices work together in a coordinated fashion.

• 한국CDE학회논문집
• /
• 제11권1호
• /
• pp.49-56
• /
• 2006

In this study, the modeling support system was developed which can make easy and fast FE-modeling and verify the results of static and durability analysis for the lower arm, one of the important parts in automobile suspension module. It took into account of the whole complicated design processes verifying the durability coefficients evaluated by fatigue analysis, which should be used to satisfy a design criteria. To guide the FE-modeling the drive page was constructed by using HTML and XML, which was based on expert's know-hows. It is able to integrate the processes to design the lower arm in practice, so that the standardization of its FE-Modeling is achieved, consequently. The 3 dimensional CAD's geometrical data were changed automatically into pre-defined shell elements under the concept of mesh-offset technique, and then welding elements were treated to connect between target and basic surfaces constructed by the shell elements. This system has also a user interface to control boundary and load ing conditions applied in performing of the static and durability analysis, in which many load cases can be applied simply with the MPCs driven by just few mouse clicks. These were implemented on the platform of MSC.Patran and utilized ANSYS, MSC.Nastran and MSC.Fatigue as the solver of the analysis performed. The developed system brings not only significant decreasing of man-hours required in FE-modeling process, but also obtaining of satisfied qualities in analyzed results. It will be integrated in a part of virtual prototyping module of the developing e-engineering framework.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.89-101
• /
• 2005

Research on highly abstracted system modeling and simulation has received a great deal of attention as of the concept of platform based design is becoming ubiquitous. From a practical design point of view, such modeling and simulation must consider the following: (i) fast simulation speed and cycle accuracy, (ii) early availability for early stage software development, (iii) inter-operability with external tools for software development, and (iv) reusability of the models. Unfortunately, however, all of the previous works only partially addresses the requirements, due to the inherent conflicts among the requirements. The objective of this study is to develop a new system design methodology to effectively address the requirements mentioned above. We propose a new transaction-level system modeling methodology, called ViP (Virtual Platform). We propose a two-step approach in the ViP method. In phase 1, we create a ViP for early stage software development (before RTL freeze). The ViP created in this step provides high speed simulation, lower cycle accuracy with only minor modeling effort.(satisfying (ii)). In phase 2, we refine the ViP to increase the cycle accuracy for system performance analysis and software optimization (satisfying (i)). We also propose a systematic ViP modeling flow and unified interface scheme based on utilities developed for maximizing reusability and productivity (satisfying (ii) and (iv)) and finally, we demonstrate VChannel, a generic scheme to provide a connection between the ViP and the host-resident application software (satisfying (iii)). ViP had been applied to several System-on-a-chip (SoC) designs including mobile applications, enabling engineers to improve performance while reducing the software development time by 30% compared to traditional methods.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제62권3호
• /
• pp.363-380
• /
• 2023

본 연구의 목적은 초등학교 교사가 수학 교과서 과제를 수학적 모델링 과제로 변형하는 과정에서 경험하는 어려움과 수학적 모델링 과제 개발을 위한 지식 변화의 사례를 분석하는 것이다. 이를 위해 10년 경력의 초등교사가 교사연구공동체의 반복적인 논의에 참여하면서 초등학교 5학년 수학의 자료와 규칙성 영역 중 평균 지도를 위한 과제를 수학적 모델링 과제로 변형하였다. 연구결과, 첫째, 교사는 과제 변형 과정에서 현실성의 반영, 수학적 모델링 과제의 적절한 인지적 수준 설정, 수학적 모델링 과정에 따른 세부 과제의 제시에 어려움을 겪었다. 둘째, 반복된 과제 변형을 통해, 교사는 학습 내용과 학생의 인지적 수준을 고려한 현실성 있는 과제의 개발, 과제의 복잡성 및 개방성 조정을 통한 과제의 인지적 수준 조정, 학생의 과제 해결 과정에 대한 사고실험을 통한 수학적 모델링 과정에 따른 세부 과제의 제시를 수행할 수 있었으며, 이는 수학적 모델링의 개념과 과제의 특징 등 수학적 모델링 과제 개발을 위해 요구되는 교사 지식이 향상되었음 보여준다. 본 연구결과는 향후 수학적 모델링 교사교육과 관련하여, 교과서 과제 변형을 통한 수학적 모델링 과제 개발 역량 향상의 기회를 제공하는 교사교육, 수학적 모델링의 이론 및 실제를 결합한 교사교육, 교사연구공동체에의 참여를 통한 교사교육이 필요함을 보여준다.