• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.403-410
• /
• 2017

In this paper, the fire extinguisher maintenance system using smart NFC communication and the real-time pressure measurement is proposed. The proposed system consists of three steps in the flow of information. The first step is to identify the fire extinguisher through NFC tagging in the fire extinguisher module using the smart device. The fire extinguisher appearance check and the real-time pressure measurement is performed in the second step, and the last step sends the check status information to the management server. In particular, the actual pressure value is calculated based on the angle of the green area and the indicating needle. Some experiments are conducted so as to verify the proposed system, and as a result, the proposed system shows that the administrator can effectively control the status information of fire safety check.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.1
• /
• pp.38-46
• /
• 2004

Image segmentation is the task which partitions the image into meaningful regions and considered to be one of the most important steps in computer vision and image processing. Image segmentation is also widely used in object-based video compression such as MPEG-4 to extract out the object regions from the given frame. Watershed algorithm is frequently used to obtain the more accurate region boundaries. But, it is well known that the watershed algorithm is extremely sensitive to gradient noise and usually results in oversegmentation. To solve such a problem, we propose an image segmentation method which is robust to noise by using stabilized inverse diffusion equation (SIDE) and is more efficient in segmentation by employing multiresolution approach. In this paper, we apply both the region projection method using labels of adjacent regions and the region merging method based on region adjacency graph (RAG). Experimental results on noisy image show that the oversegmenation is reduced and segmentation efficiency is increased.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.2 s.314
• /
• pp.1-10
• /
• 2007

Branch prediction accuracy is critical for the overall system performance. Branch miss-prediction penalty is the one of the significant performance limiters for improving processor performance, as the pipeline deepens and the instruction issued per cycle increases. In this paper, we propose "Dynamic Per-Branch History Length Fitting Method" by tracking the data dependencies among the register writing instructions. The proposed solution first identifies the key branches, and then it selectively uses the histories of the key branches. To support this mechanism, we provide a history length adjustment algorithm and a required hardware module. As the result of simulation, the proposed mechanism outperforms the previous fixed static method, up to 5.96% in prediction accuracy. Furthermore, our method introduces the performance improvement, compared to the profiled results which are generally considered as the optimal ones.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.5
• /
• pp.1223-1234
• /
• 2016

The Industrial control system is adopted by various industry field and national infrastructure, therefore if it received cyber attack, the serious security problems can be occured in the public sector. For this reason, security requirements of the industrial control system have been proposed, in accordance with the security guidelines of the electronic control system, and it is operated by separate from the external and the internal network. Nevertheless, cyber attack by malware (such as Stuxnet) targeting to control system have been occurred continuously, and also the real-time detection of untrusted traffic is very difficult because there are some difficulty of keeping up with quickly evolving the advent of new-variant malicious codes. In this paper, we propose the traffic analysis architecture for providing secure industrial control system based on the analyzed the security threats, the security requirements, and our proposed architecture.

• Journal of Information Management
• /
• v.40 no.1
• /
• pp.217-234
• /
• 2009

In computer-based virtual lab, a bioscience researcher who wants to obtain bio information first uses a biodiversity-related database to retrieve information on species, ecology and distribution of an organism. The researcher also needs to access gene/protein databases such as GenBank or PDB to find information on the organism's genetic sequence and protein structure. Furthermore, the researcher should search for academic papers containing the information on the organism so that his research is based on comprehensive and accurate information. This series of activities often undermines research efficiency as it takes a lot of time and causes inconvenience on the part of researchers. To solve such inconvenience, we analyzed various methods for integrated search and chosen schema integration. In addition, we analyzed each databases and extracted metadata for designing schema integration. This paper introduces a biological information retrieval system(BIRS) using schema integration and it's interface that will increase research efficiency for bioscience.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2032-2033
• /
• 2007

There has been increasing interests of condition monitoring and diagnosis for electric equipment, which lead to the development of this system domestic and abroad. In the past, operators' interest was how to quickly repair and restore the electric equipments after failure. But, due to the North American Blackout in 2003 and the aging of equipments, users have paid attention to the condition based monitoring of electric equipment to prevent a fault like outrage. GIS-PDS("GIS Preventive and Diagnosis System") requiresa large amount of measurement data with timeliness for monitoring and analysis of real-time state of GIS(Gas Insulated Switchgear). We developed the timeliness-guaranteed communication device for GIS-PDS.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.592-602
• /
• 2021

Thorium compounds have attracted immense scientific and technological attention with regard to both fundamental and practical implications, owing to unique chemical and physical properties like high melting point, high density and thermal conductivity. Hereby, we investigate the mechanical and thermodynamic stability and report on the structural, electronic and magnetic properties of new silicon-doped cubic ternary thorium phosphides ThSi_xP_1-x (x = 0, 0.25, 0.5, 0.75 and 1). The first-principles density functional theory procedure was adopted within full-potential linearized augmented plane wave (FP-LAPW) method. The exchange and correlation potential terms were treated within Generalized-Gradient-Approximation functional modified by Perdew-Burke-Ernzerrhof parameterizations. The proposed compounds showed mechanical and thermodynamic stable structure and hence can be synthesized experimentally. The calculated lattice parameters, bulk modulus, total energy, density of states, electronic band structure and spin magnetic moments of the compounds revealed considerable correlation to the Si substitution for P and the relative Si/P doping concentration. The electronic and magnetic properties of the doped compounds rendered them non-magnetic but metallic in nature. The main orbital contribution to the Fermi level arises from the hybridization of Th(6d+5f) and (Si+P)3p states. Reported results may have potential implications with regard to both fundamental point of view and technological prospects such as fuel materials for clean nuclear energy.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.54-59
• /
• 2019

CNC(Computer Numerical Control) machine tools are being used in various industrial fields such as aircraft and automobiles. The machining conditions used in the mold industry are used, and the simulation and the experiment are compared. The tool used in the experiment was carried out to increase the reliability of the simulation of the cutting machining. The program used in the 3D-FEM (finite element method) was the AdvantEdge and predicted by down-milling. The tool model is used 3D-FEM simulation by using the cutting force, temperature prediction. In this study, we carried out the verification of cutting force by using a 3-axis tool dynamometer (Kistler 9257B) system when machining the plastic mold Steel machining of NAK-80. The cutting force experiment data using on the charge amplifier (5070A) is amplified, and the 3-axis cutting force data are saved as a TDMS file using the Lab-View based program using on NI-PXIe-1062Q. The machining condition 7 was the most similar to the simulation and the experimental results. The material properties of the NAK-80 material and the simulation trends reflected in the reverse design of the tool were derived similarly to the experimental results.

• Journal of Information Science Theory and Practice
• /
• v.8 no.4
• /
• pp.55-66
• /
• 2020

The purpose of this study is to examine the relationship between collaborative information seeking and users' learning style preferences and their experience of information systems. The study investigates the role of four different factors including learning style, task complexity, and user experience in collaborative information seeking in digital environments. Sixty participants (30 pairs) were randomly chosen from volunteer graduate students of Kharazmi University (Iran). Participants completed Kolb's learning style questionnaire and a user experience questionnaire and then performed two information seeking tasks (one simple and one difficult) in a lab setting. They could exchange information with their partners or a librarian using Skype. The sessions were recorded using Camtasia. The results showed that with an increase in task difficulty, collaborative information seeking activities increased and more interactions with partners and the librarian occurred. The number of executive help-seeking requests was higher than the number of instrumental help-seeking requests. This research confirms that learning style is related to the way users interact with the digital library and help seeking. The research showed that in difficult tasks, the differences among users with different learning styles become more evident, and that generally interactions increase in more difficult tasks. Among the learning styles, the accommodating style had the highest number of relationships with collaborative information seeking variables. Most of the statistically significant relationships between users' prior computer experience and collaborative information seeking variables were related to the time variable.

• Imaging Science in Dentistry
• /
• v.51 no.4
• /
• pp.399-406
• /
• 2021

Purpose: This in vitro study measured and compared 3 intraoral scanners' accuracy (trueness and precision) with different span lengths. Materials and Methods: Three master casts were prepared to simulate 3 different span lengths (fixed partial dentures with 3, 4, and 5 units). Each master cast was scanned once with an E3 lab scanner and 10 times with each of the 3 intraoral scanners (Trios 3, Planmeca Emerald, and Primescan AC). Data were stored as Standard Tessellation Language (STL) files. The differences between measurements were compared 3-dimensionally using metrology software. Data were analyzed using 1-way analysis of variance with post hoc analysis by the Tukey honest significant difference test for trueness and precision. Statistical significance was set at P<0.05. Results: A statistically significant difference was found between the 3 intraoral scanners in trueness and precision (P<0.05). Primescan AC showed the lowest trueness and precision values(36.8 ㎛ and 42.0 ㎛;(39.4 ㎛ and 51.2 ㎛; and 54.9 ㎛ and 52.7 ㎛) followed by Trios 3 (38.9 ㎛ and 53.5 ㎛; 49.9 ㎛ and 59.1 ㎛; and 58.1 ㎛ and 64.5 ㎛) and Planmeca Emerald (60.4 ㎛ and 63.6 ㎛; 61.3 ㎛ and 69.0 ㎛; and 70.8 ㎛ and 74.3 ㎛) for the 3-unit, 4-unit, and 5-unit fixed partial dentures, respectively. Conclusion: Primescan AC had the best trueness and precision, followed by Trios 3 and Planmeca Emerald. Increasing span length reduced the trueness and precession of the 3 scanners; however, their values were within the accepted successful ranges.