• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.488-491
• /
• 2003

A motion compression method by min s-norm composite fuzzy relational equations (dual-MCF) is proposed, where a motion sequence is divided into intra-pictures (I-pictures) and predictive-pictures (P-pictures). The I-pictures and the P-pictures are compressed by using uniform coders and non-uniform coders, respectively. A design method of non-uniform coders is proposed to perform an efficient compression and reconstruction of the P-pictures, based on the dual overlap level of fuzzy sets and a fuzzy equalization. An experiment using 10 P-pictures confirms that the root means square errors of the proposed method is decreased to 82.9％ of that of the uniform coders, under the condition that the compression rate is 0.0055. An experiment of motion compression and reconstruction is also presented to confirm the effectiveness of the dual-MCF based on the non-uniform coders.

• Journal of Korean Neurosurgical Society
• /
• 제40권2호
• /
• pp.95-98
• /
• 2006

Objective : The aim of this study is to evaluate the feasibility, safety and effectiveness of radiofrequency neurotomy[RFN] for remnant pain after vertebroplasty for the treatment of severe compression fracture. Methods : 25 patients with remnant pain after vertebroplasty for one level severe compression fracture were treated by RFN. The severe compression fractures were defined to the vertebrae which less than 50% of their original heights have collapsed. Pain relief was evaluated at 2 weeks, 6 weeks and 3 months after the procedure using a visual analog scale[VAS]. Results : Successful outcome was determined if pain reduction exceeded 50% on the VAS at 6 weeks. Six of the 25 patients did not respond favorably to RFN [pain reduction less than 50%], and nineteen patients showed successful responses. Mean VAS score was decreased from 5.48 to 2.96 at 6 weeks. Conclusion : The radiofrequency neurotomy may be both feasible and useful treatment for the remnant pain after vertebroplasty. However long-term follow up is needed to confirm the effectiveness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.218-224
• /
• 1999

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage devices with high storage density using short wavelength laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates with high is regarded as the most suitable process to manufacture optical disk substrates with high dimensional accuracy low residual stresses and superb optical properties In the present study polycarbonate optical disk substrates were fabricated by injection compression molding and the birefringence regarded as one of the most important optical properties for optical disk is measured. The effects of various processing conditions upon the development of birefringence distribution were examined experimentally. It was found that the value of the birefringence distribution were very sensitive to the mold wall temperature history and the variance of the birefringence distribution in the radial direction was affected by the level of the packing and the compression pressure.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.810-814
• /
• 2002

According to the image level definition for KOMPSAT-2 in KOMPSAT-2 Ground Station Specification, the level 0 is frame formatted, unprocessed data at full resolution; any and all communications artifacts (e.g., synchronization frames, communications headers) removed. The level 0 is used for two purposes: 1) exchange of imagery between image receiving & processing element (IRPE), and 2) image transfer from the Receiving & Archiving Subsystem to Search & Processing Subsystem. On-board processing of imagery data of KOMPSAT-2 includes JPEG-like compression and encryption besides conventional CCSDS packetization. The encryption is used to secure imagery data from any intervention during downlink and compression allows real-time downlink of image data reducing data rate produced from the camera. While developing ground receiving system for KOMPSAT-2, it was necessarily to define level 0 products. In this paper, we will suggest level 0 product definition for KOMPSAT-2 and explain reasons of the decisions made. The key factor used while defining the level 0 products is the efficiency of whole ground receiving system. The latter half of the paper will explain the implementation of software that generates level 0 products. The necessary steps to produce level 0 products will be explained, and the performance achieved will be presented.

• 한국음향학회지
• /
• 제31권5호
• /
• pp.273-279
• /
• 2012

본 논문에서는 64채널 디지털 보청기의 주파수 채널 별 비선형 압축을 위한 휘팅 기법을 연구하였다. 청력 검사 결과로부터 수행되는 기존의 휘팅 포뮬라 기법과 달리, 귓속형 보청기를 사용자가 외이도에 착용한 상태에서 고막에서의 청력 역치를 측정하여 이를 휘팅에 적용하였다. 또한 외부 음성 음압의 주파수 별 분포도를 활용하여 입력 음압 대비 출력 음압 압축 곡선을 구현하였다. FFT-iFFT 방식의 이론적 압축 연구 결과를 실험적으로도 검증하였으며, 입력음압 레벨이 각각 50 dB, 70 dB, 90 dB일 때의 증폭 이득 곡선을 보여주었다.

• Journal of Korean Neurosurgical Society
• /
• 제49권1호
• /
• pp.58-60
• /
• 2011

Ligamentum flavum hematoma (LFH) is a very rare condition of dural compression; most are observed in the mobile cervical and lumbar spine regions. A 67-year-old man who had a long level interbody fusion at L3-S1 four years ago presented with symptoms suggestive of dural compression. Magnetic resonance imaging showed a posterior semicircular mass located at the adjacent L2-L3 level. After decompression of the spinal canal and removal of the mass lesion, pathological examination of the surgical specimen revealed a hematoma within the ligamentum. The patient fully recovered to normal status after surgery. Here, we report our experience with a LFH in the adjacent segment after a long level fusion procedure and discuss the possible associated mechanisms.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.249-252
• /
• 2006

When concrete is subjected to uniaxial compression, the failure process is normally initialed from a localized zone. The localization of failure governs structural behaviors of concrete. In this paper, the compressive strength and failure behavior of recycled coarse aggregate concrete with different replacement level of recycled coarse aggregates are investigated using acoustic emission(AE). AE characteristics of concrete were investigated during the entire loading period. For these purpose, four recycled coarse aggregate replacement level (i.e 0%, 30%, 60% and 100%) were considered in this paper. Result from this study show AE signal, AE method can apply to investigate a compressive failure mode according to recycled coarse replacement level.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.42-49
• /
• 2006

In this research. the diesel cycle was thermodynamically interpreted to evaluate the possibility of high efficiency by converting diesel engines to the high expansion diesel cycle, and general cycle features were analyzed after comparing these two cycles. Based on these analyses. an experimental single cylinder a long stroke with high expansion-diesel engine. of which S/B ratio was more than 3, was manufactured. After evaluating the base engine through basic experiments, a diesel engine was converted into the high expansion diesel engine by establish VCR device and VVT system Accordingly, the high expansion diesel cycle can be implemented when the quantity of intake air is compensated by supercharge and the effective compression ratio is maintained at its initial level through the reduction of the clearance volume. In this case, heat efficiency increased by $5.0\%$ at the same expansion-compression ratio when the apparent compression ratio was 20 and the fuel cut off ratio was 2. As explained above, when the atkinson cycle was used for diesel cycle, heat efficiency was improved. In order to realize high expansion through retarding the intake value closing time, the engine needs to be equipped with variable valve timing equipment, variable compression ratio equipment and supercharged pressure equipment. Then a high expansion diesel cycle engine is realized.

• 한국포장학회지
• /
• 제16권1호
• /
• pp.1-4
• /
• 2010

The compression strength of corrugated fiberboard containers for packaging the agricultural products rapidly decreases because of various environmental conditions during distribution of unitized products. Among various environmental conditions, the main factors affecting the compression strength of corrugated fiberboard are absorption of moisture, long-term accumulative load, and fatigue caused by shock and vibration. An estimated rate of damage for fruit during distribution is about 30~40% owing to the shock and vibration. This study was carried out to characterize the durability of corrugated fiberboard containers for packaging the fruits and vegetables under simulated transportation environment. After the packaging freight was vibrated at various experimental conditions, the compression test for the packaging was performed. The compression strength of corrugated fiberboard containers decreased with loading weight and vibration time. The multiple nonlinear regression equation ($R^2$ = 0.9198) for predicting the decreasing rate of compression strength of corrugated fiberboard containers were developed using four independent variables such as input acceleration level, input frequency, loading weight and vibration time.

• 한국농공학회지
• /
• 제38권3호
• /
• pp.70-81
• /
• 1996

Solutions of geotechnical engineering problems require predictions of deformation and stresses during various stages of loading. Powerful numerical methods are available to make such predictions even for complicated problems. To get accurate results, realistic stress-strain relationships of soils are dependent on a number of factors such as soil type, density, stress level and stress path. Attempts are continuously being made to develope analytical models for soils incorporating all such factors. Isotropic compression-expansion test and a series of drained conventional triaxial tests with several stress path for Baekma river sand were performed to investigate stress-strain and volume change characteristics of Lade's single work hardening model dependant on the stress path. In order to predicted of stress-strain and volumetric strain behavior were determined the values of parameters for the mode by the computer program based on the regression analysis. Predicted stress-strain behavior of triaxial compression tests and optional stress path tests for increasing confining pressure with parameters obtained conventional triaxial compression tests agreed with several test results but the prediction results for decreasing confining pressure reduced triaxial compression tests make a little difference with test results.