• 한국주거학회논문집
• /
• 제21권1호
• /
• pp.103-112
• /
• 2010

This Study is about the check-List composition for 'Low carbon green growth' of Long-life housing. That utilization for required the check-list composition at Sustainable building strategies and Design methods. That for long life housing, sustainable building strategies part of building construction and interior, the proper foundation for legislative system, maintenance methods with in building life cycle, sustainable and green architecture capability realization prepare for connection plan with 'Low carbon-green growth'. Extracting from elements of Architectural planing answer to basic concept of Low carbon-green growth and aimed at Low carbon scheme for energy saving, green growth scheme for environmental conservation as to each application purpose reconstitute by classify Check-list category about elements of Architectural planing. Through this architectural research deduce elements of architectural planing that can be research utilization with in Check-list composition.

• 정보처리학회논문지D
• /
• 제18D권1호
• /
• pp.23-34
• /
• 2011

최근의 소프트웨어 개발에서는 리팩토링이 활발하게 이용되고 있다. 리팩토링에 대한 관심이 높아지면서 요소 리팩토링을 정의해서 이들의 조립을 통해 더 큰 종류의 복합 리팩토링을 처리하려는 연구들이 많이 진행되고 있다. 복합 리팩토링은 조합된 요소 리팩토링의 순서대로 처리되기 때문에 프로그램에 실제 적용하기에 앞서 적용 가능성을 판단하는 것이 중요하다. 기존 연구들에서는 요소 리팩토링들의 선 후행조건들로부터 복합 리팩토링에 대한 선행조건을 계산하여 적용 가능성을 판단하고 있다. 이것은 선행조건이 정의되어 있는 복합 리팩토링만 판별할 수 있으며 선행조건이 정의되어 있지 않은 복합 리팩토링에 대해서는 적용 가능성을 판단할 수 없는 문제점이 있다. 본 연구에서는 복합 리팩토링의 명세를 추가로 정의 하지 않고 요소 리팩토링만으로 조립 가능 여부를 판단하고자 한다. 이를 위해 요소 리 팩토링을 명세하는 방법과 조립성 검사 방법을 제안한다. 이를 기반으로 프로토타입 도구를 개발해 보고, 적용사례를 통해 선행조건이 명세되어 있지 않은 복합 리팩토링들의 조립성 검사를 확인해봄으로써 본 연구의 효용성을 검토해본다.

• 대한기계학회논문집B
• /
• 제31권6호
• /
• pp.522-530
• /
• 2007

The practical studies on the method of particle contamination control for yield enhancement in the cleanroom were carried out. The method of the contamination control was proposed, which are composed of data collection, data analysis, improvement action, verification, and implement control. The partition check method and the composition analysis for data collection and data analysis were respectively used in the main board and the cellular phone module production lines. And these methods were evaluated by the variation of yield loss between before and after improvement action. In case that the partition check method was applied, the critical process step was selected and yield loss reduction through improvement actions was observed. While in case that the composition analysis was applied, the critical sources were selected and yield loss reduction through improvement actions was also investigated. From these results, it is concluded that the partition check and the composition analysis are effective solutions for particle contamination control in the cleanroom production lines.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권4호
• /
• pp.37-53
• /
• 2017

Purpose: As the structure of the disease has been changed and the infectious disease has been increased, the demand for diagnostic examination has been increasing. So, the department of laboratory medicine in hospital has playing the important role accounting for about nineteen percent of total medical expenses in korea. This study is to investigate the laboratory function and spatial composition of the department and figure out the space area and space organization. Methods: Explore the literature review to identify the laboratory function. Limit to five cases of tertiary level general hospital having about a thousand bed and analyze the space layout and floor area to confirm the spatial composition. Classify the exam function and check the spatial composition and spatial organization. Results: This study allows 5 conclusions to be summarized. Laboratory medicine divided into nine part in regulation, but in space allocated into core lab, emergency lab and six part lab. Total laboratory area is $2,036m^2$ in average, and is composited with 60% for lab, 17% for office and 20% for public. Lab area per a bed presents $1.88m^2$. Microbiolgy and molecular lab area are getting large. Laboratory space organized into the four zone, like an entrance zone, core zone, rear zone and peripheral zone. Emergency and transfusion lab are allocated in entrance zone, hematology chemistry and immunology in core lab, microbiology and molecular lab in rear, support offices in peripheral zone. The most important point was to check the spatial composition of the Laboratory Medicine according to the inspection function. Implications: This study can be used as a useful data in planning and designing a Laboratory Medicine Department.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (B)
• /
• pp.10-12
• /
• 2003

Since building large-scale software is usually bi9 burden to most developers, it has been an important issue for many researchers. In this paper, we suggest a mechanism that can be used to support such large-scale development. Through composition rules via subtyping within Statecharts, incremental construction of software can be achieved. Among the composition rules (i.e. delegation rule and mixin rule), we mainly focus on the delegation rule in our work. Not only we can check the subtype property. but also can verify the behavior compatibility of composite results that are available by composition rules. This new mechanism is helpful for analysts as well as designers, and it can be used as a guideline for incremental and compatible construction of component based software.

• 보존과학회지
• /
• 제26권1호
• /
• pp.33-41
• /
• 2010

행정박물이란 공공업무의 활동을 반영하는 유형적 증거물로서 행정적 역사적 상징적 문화적 예술적 가치를 지니는 형상기록물이며 세계 여러 나라에서 제작되어 재질과 제작기법이 다양하지만, 재질조사 및 보존관리 시스템이 확립되지 않아 효율적인 보존관리의 어려움이 많다. 그러므로 본 연구에서는 금속류 행정박물에 대한 재질조사와 상태점검을 통하여 효율적인 보존관리를 위한 기초자료를 제시하고자 한다. 금속류 행정박물 중 상태점검 및 재질 분류는 공직자 선물 가운데 변색, 산화, 결손 및 균열이 기록된 12점을 선별하여 조사하였다. 행정박물의 전반적인 상태를 점검하기 위해 국내 박물관, 미술관 및 일본민족학박물관에서 사용하는 상태점검카드를 수집 정리하여 새로운 점검카드를 작성 후 금속류 행정박물을 점검하였다. X-ray를 통해 행정박물의 제작기법과 소재간의 결합방법, 구조상 취약부분에 대하여 조사하였으며 P-XRF를 사용하여 행정박물의 재질 분석을 시도하여 각 재질별 분류를 실시하였다. 점검결과 행정박물의 외형적 특성과 손상부분에 대한 점검이 가능하고 구조적으로 취약한 부분을 관찰 할 수 있었다. 또한 P-XRF 측정을 통하여 재질이 미상으로 기록된 행정박물의 재질을 밝혀내었고 기록카드에 기재된 재질과 다른 재질을 찾아낼 수 있었다. 행정박물의 상태점검 및 손상정도, 재질별 분류 방법은 향후 보존관리를 위한 자료로써 활용이 가능하며 재질에 따른 훼손 방지 및 관리를 위한 보존관리지침 수립 등 장기보존을 위한 기초자료로서도 활용이 가능한 것으로 보인다.

• 대한의생명과학회지
• /
• 제16권3호
• /
• pp.169-177
• /
• 2010

Osteoporosis is a disease that increases the fracture rates and a major cause of increased mortality and morbidity in the elderly people. This study is to determine which components of body composition and metabolic syndrome risk factors are important to bone health, we analysed the relationship among bone mineral density (BMD), body composition and metabolic syndrome risk factors in females. Totally 630 females participated in a medical check-up program (mean age 47 years) were selected for this study. Body composition analysis was performed by segmental bioelectrical impedance method, muscle mass, and percent body fat were measured. We also measured metabolic syndrome risk factors including abdominal obesity, HDL-cholesterol, triglyceride, blood pressure and fasting glucose level. Metabolic syndrome was defined by NCEP-ATP III criteria. The lumbar spine and femoral neck BMD were measured using the dual energy X-ray absorptiometry. Osteopenia and osteoporosis were observed in 180 and 51 persons, respectively. Muscle mass and HDL-cholesterol decreased in osteopenia and osteoporosis groups compared to the control group, and the grade was shown progressively by the symptoms. Significant positive correlation between BMD and muscle mass was observed. Multi variable regression analyses showed that % body fat and muscle mass were independent predictors of BMD after adjustment of age, height and weight. In conclusion, the BMD showed negative correlation with the metabolic and body composition was associated with BMD.

• 대한토목학회논문집
• /
• 제5권1호
• /
• pp.141-148
• /
• 1985

본(本) 연구(硏究)는 현존(現存)하는 백제시대(百濟時代)의 두 석탑(石塔)인 미륵사지(彌勒寺址) 석탑(石塔)과 정림사지(定林寺址) 오층석탑(五層石塔)의 조형(造形)에 관한 기하학적(幾何學的) 해석(解析)이다. 두 석탑(石塔)을 지상측정용(地上測定用) Camera P31과 정밀입체도화(情密立體圖化)에 A-10을 이용하여 현존(現存) 복발(覆鉢)부분까지 남아있는 정림사지(定林寺址) 오층석탑(五層石塔)과 손상부분이 많은 미륵사지(彌勒寺址) 석탑(石塔)을 비교고찰(比較考察)한 결과 같은 조형원리(造形原理) 즉, 기준면(基準面)(module)으로부터 정삼각형을 작도하고 그 정삼각형의 정점(頂點) 윗부분에 있는 옥개석폭(屋蓋石幅)의 비(比)가 9 : 8 : 7 : 6 : (5)로 체감(遞減)되어 나가는 것을 알 수 있었고, 손상되기전의 복발(覆鉢)부분까지의 높이를 추정(推定)할 수 있었다.

• 한국콘텐츠학회논문지
• /
• 제8권5호
• /
• pp.237-245
• /
• 2008

도서관상호의 네트워트화, 자료의 복합이용화, 이용자의 장기 체재화 등의 일본 공공도서관의 최근 변화 특징은, 이에 대응한 서비스 및 컨텐츠의 변화를 요구하고 있다. 국내에서도 학교도서관의 사서교사 배치 및 도서관인 양성교육의 개혁 등 정책적으로 도서관의 컨텐츠 측면의 관심이 높아져 있는 상황이며, 정부나 지방자치단체 주도하에 BTL방식으로 국 공 시립 도서관 및 기존 학교의 도서관 증개축 작은도서관 등 문화소외지역을 우선으로 다양한 도서관들이 전국적으로 증가하고 있다. 본 연구는 일본 치바지역 공공도서관 중 치바시 중앙도서관, 토미사토시, 이치가와시 시립도서관을 선정 조사하여 도서관 공간구성 및 자동화 출납서가시스템, 상호간 네트워크화를 고찰하고, 우리 공공도서관 시스템에 적용 가능한 콘텐츠와 자동화 출납서가시스템의 도입 방안을 모색한다.

• 산업경영시스템학회지
• /
• 제31권2호
• /
• pp.112-121
• /
• 2008

Nowaday the supply chain competitiveness is emphasized more and more than a company's own competitiveness. One of the most important processes in import and export is a publication over the Bill of Loading. In the publication of those bills S/R(shipping request) and check B/L for reviewing are circulated among consignors, forwarders, shipping companies and airlines by fax and e-mail. Or there should be expensive a One to One system, like an EDI. Each party has to re-input S/R data to their own systems and check it several times. The S/R data are converted digital to analog type and analog to digital repeatedly to check in the process. As the process goes by there can be not only input data errors but also waste of time and cost. ECR(electronic character recognition) is a technology can solve the Problem. Considering the data structure of documents in many systems used ECR samples SIR data from documents written in the digital type. But it is not enough with it only. To make N to N composition in reality more efficient we make a documents hub on the web reengineering the existing process to One to One relation. The ECR documents hub system has given us beneficial effects over a year throughout a field test.