• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.231-238
• /
• 2022

Purpose. This study aimed to investigate the effect of different veneering methods on the tensile bond strength between polyetherketoneketone (PEKK) and denture base resins. Materials and methods. A total of 80 PEKK T-shaped specimens were fabricated and the primer (Visio.link) was applied after airborne-particle abrasion with 110 ㎛ alumina oxide powder. According to the veneering method, the specimens were divided into four groups (n = 20) to be veneered with the gingival colored packable photopolymerized composite resin (SR Adoro); flowable photopolymerized composite resin, (Crea.lign); heat-polymerized resin (Vertex); and self-polymerized resin (ProBase Cold). Each group was divided into two subgroups (n = 10) according to the artificial thermal aging. After the tensile bond strength measurement via universal testing machine, the fracture sections of all specimens were observed. Two-way ANOVA and Tukey's HSD post hoc test were used for the statistical analysis (α = .05). Results. The results of the two-way ANOVA showed statistically significant differences in the tensile bond strength according to the veneering method and artificial thermal aging of denture base resins (P<.001). The highest tensile bond strength showed in the packable photopolymerized resin group before and after the artificial thermal aging. The lowest tensile bond strength showed in the heat-polymerized resin group. The mixed and adhesive fracture showed in all groups. Conclusion. The veneering method and artificial thermal aging can influence in the tensile bond strength between the resin and PEKK. The artificial thermal aging can reduce the tensile bond strength.

• The Journal of Korean Medicine
• /
• v.26 no.2 s.62
• /
• pp.95-104
• /
• 2005

Objectives: This was a double blinded, randomized, placebo-controlled clinical study for evaluation of safety and effective dose finding of Cardiotonic Pills$^{(R)}$ in patients with chest pain and discomfort. Cardiotonic Pills$^{(R)}$ are composed of Salviae Miltiorrhizae Radix (丹蔘), Notoginseng Radix (三七根) and Borneolum (龍腦). Major effects of Salviae Miltiorrhizae Radix and Notoginseng Radix are vasodilatation, sedation and analgesic action. Borneolum has an antibacterial effect, and can stimulate the central nervous system. All of these substances are oriental herbs that have been used for a long time in east Asia. Cardiotonic Pills fi received Investigational New Drug (IND) approval from the Food and Drug Administration (FDA) in the USA and 40 million people in the world take this pill. We performed a phase IV clinical study to confirm its efficacy and safety in patients who have probable cardiogenic or psychogenic chest pain or chest stifling. Methods: This study was planned for a multi-center clinical trial including four university hospitals of oriental medicine in Korea. This was the first time to evaluate the 'planning treatment according to diagnosis (辨證施治)' of chest pain or chest discomfort according to oriental medical guidelines. The patients who were included in this trial were adult volunteers from 20 to 70 years old who had chest pain or chest discomfort more than twice during a recent month, and we received written consent to participate in this study from all of them. After administration of Cardiotonic Pills$^{(R)}$ for 8 weeks, number of occurrences, duration, appearance and degree of chest pain or chest discomfort was observed and degree of symptoms (severity of illness, global improvement) were measured using a patient's global assessment composite scale. Results: In the patient's global assessment scale, the severity of illness of the Cardiotonic Pills$^{(R)}$ group (n=25) was 14/25=0.56 but of the placebo group (n=25) was 7/25=0.28 (p-value=0.0449). This result indicates Cardiotonic Pills$^{(R)}$have a positive effect on the symptoms of chest pain and discomfort. However, the global improvement of the Cardiotonic Pills$^{(R)}$group was 23/25=0.92, and of the placebo group was 22/25=0.88 (p-value=0.6374). The total symptom score of the Cardiotonic Pills$^{(R)}$ group was $1.68\pm20.06$, and of the placebo group was $16.76\pm72.l4$(p-value=0.2285). The number of symptom events of the Cardiotonic Pills$^{(R)}$ group was $72\pm29.78$, and of the placebo group (n=25) was $10.80\pm38.42$ (p­value=0.3660). We could not find any effects on the other factors examined besides the severity of illness, beyond the difference of standard deviations. Conclusions: Cardiotonic Pills$^{(R)}$ significantly reduced chest pain and chest discomfort in patients. Therefore, we expect that Cardiotonic Pills$^{(R)}$ will be helpful for patients with chest pain and chest discomfort not only caused by heart disease but also by other diseases.

• Composites Research
• /
• v.12 no.4
• /
• pp.71-78
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with diaminodiphenyl methane (DDM), diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work, the effect of aromatic amine curing agents. In contrast, the results show that the DGEBA/DDS cure system having the sulfone structure between the benzene rings had higher values in the conversion of epoxide, density, shrinkage (%), glass transition temperature, tensile modulus and strength, flexural modulus and strength than the DGEBA/DDM cure system having methylene structure between the benzene rings, whereas the DGEBA/DDM cure system presented higher values in the maximum exothermic temperature, thermal expansion coefficient, and thermal stability. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property and stem from the effect of the conversion ratio of epoxide group. The result of fractography shows that the each grain size of the DDM/DGEBA system with feather-like structure is larger than that of the DDS/DGEBA system.

• Restorative Dentistry and Endodontics
• /
• v.33 no.2
• /
• pp.148-161
• /
• 2008

The purpose of this study was to evaluate the effect of chlorhexidine (CHX) on microtensile bond strength (${\mu}TBS$) of dentin bonding systems. Dentin collagenolytic and gelatinolytic activities can be suppressed by protease inhibitors, indicating that MMPs (Matrix metalloproteinases) inhibition could be beneficial in the preservation of hybrid layers. Chlorhexidine (CHX) is known as an inhibitor of MMPs activity in vitro. The experiment was proceeded as follows: At first, flat occlusal surfaces were prepared on mid-coronal dentin of extracted third molars. GI (Glass Ionomer) group was treated with dentin conditioner, and then, applied with 2 % CHX. Both SM (Scotchbond Multipurpose) and SB (Single Bond) group were applied with CHX after acid-etched with 37% phosphoric acid. TS (Clearfil Tri-S) group was applied with CHX, and then, with adhesives. Hybrid composite Z-250 and resin-modified glass ionomer Fuji-II LC was built up on experimental dentin surfaces. Half of them were subjected to 10,000 thermocycle, while the others were tested immediately. With the resulting data, statistically two-way ANOVA was performed to assess the ${\mu}TBS$ before and after thermo cycling and the effect of CHX. All statistical tests were carried out at the 95 % level of confidence. The failure mode of the testing samples was observed under a scanning electron microscopy (SEM). Within limited results, the results of this study were as follows; 1. In all experimental groups applied with 2 % chlorhexidine, the microtensile bond strength increased, and thermo cycling decreased the micro tensile bond strength (P > 0.05). 2. Compared to the thermocycling groups without chlorhexidine, those with both thermocycling and chlorhexidine showed higher microtensile bond strength, and there was significant difference especially in GI and TS groups. 3. SEM analysis of failure mode distribution revealed the adhesive failure at hybrid layer in most of the specimen. and the shift of the failure site from bottom to top of the hybrid layer with chlorhexidine groups. 2 % chlorhexidine application after acid-etching proved to preserve the durability of the hybrid layer and microtensile bond strength of dentin bonding systems.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.653-660
• /
• 2006

Fuji VII is a glass-ionomer cement specially targeted for early protection in erupting first and second molars. Properties of Fuji VII such as very high level of fluoride release, low viscosity and no need to preliminarily etch the substrate would be useful to erupting molars with primary pit and fissure caries or hypoplastic area for preventive goal or remineralization. The purpose of this study were to evaluate remineralization of Fuji VII glass ionomer cement and to compare with one of other restorative materials such as conventional glass ionomer cement, resin-modified glass ionomer cement, compomer and composite resin. Forty-two extracted human molars were used for this study. All teeth were immersed in demineralizing solution for 48 hours after Class V cavity preparation was made on sound proximal surface. The teeth were randomly divided into six groups and restored with Fuji VII, Fuji II, Fuji II LC improved, F2000, $Filtek^{TM}$ Z250 and control group was unrestored. The middle area with $130{\pm}20{\mu}m$ thickness was separated from specimen using microtome and demineralized area was photographed under polarized microscope. Separated area was relocated to specimen and stored in artificial saliva, After four weeks, changes of demineralized area were observed and compared to them restorated immediately. The results from the this study can be summarized as follows ; 1. Fuji VII, Fuji II, Fuji II LC improved have more prominent remineralization effect than F2000, $Filtek^{TM}$ Z250, control group. 2. No significant differences in remineralization effect are seen between Fuji VII and Fuji II, Fuji II LC improved.

• Journal of Bio-Environment Control
• /
• v.7 no.1
• /
• pp.63-70
• /
• 1998

This study was carried out to investigate the interaction of selenate and sulfate ion in nutrient solution supplyed with selenate ion. At early growth stage, the growth of Mongolian wormwood was best at 3mM sulfate ion and 2mg/$\ell$Na$_2$SeO$_4$ treatment. As they were grown and matured, at the later growth stage, the effect of antagonism between selenate and sulfate ion on the growth of each plant decreased. At supplying with selenate ion in nutrient solution, the uptake of selenate by plant had negative correlation with sulfate ion concentration in nutrient solution. The higher sulfate ion concentration, the less selenium uptake. However, the effect of antagonistic interaction of selenate and sulfate ion on the selenium uptake increased with plant age. Whereas, the uptake of sulfate ion had positive correlation with sulfate ion concentration in nutrient solution at supplying with selenate ion in nutrient solution. The uptake of sulfate ion increased with increase of sulfate ion concentration in nutrient solution. The effect of this interaction with selenate and sulfate ion increased with growth and maturity of plant. However, at 3mM sulfate ion concentration in nutrient solution, sulfate ion concentration in plant tissue decreased markedly.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.325-329
• /
• 2015

Purpose: The aim of this study was to compare the film thicknesses of several resin cements as a function of time after mixing and to examine the effect of working time on the film thicknesses. Materials and methods: The film thickness (${\mu}m$) of 4 resin cements (n=10), 1 composite resin (Panavia F 2.0), 3 self-adhesive resin (Clearfil SA luting, Zirconite, RelyX U200) cements was measured at 20-second intervals after mixing of the cements up to 200 seconds under a load of 50 N. Linear regression was fitted to verify the effect of working time on the film thickness of each cement. Data were compared to the working time recommended by manufacturers using Wilcoxon test ($\alpha$=.05). Results: All of the materials showed a positive linear correlation between the film thickness and working time. There was no statistically significant difference between the working time based on our results and the values recommended by the manufacturers even though there was a discrepancy between those two values. Conclusion: The film thickness of resin cements could increase with the increase of working time. Working time to meet the ISO standard of $50-{\mu}m$ maximum film thickness could be different from the manufacturer's recommended value.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.699-720
• /
• 1995

This study was conducted to evaluate the effect of benzalkonium chloride solution as a wetting agent instead of water on dentin bonding with NTG-GMA/BPDM system (All-bond 2, Bisco.) and DSDM system (Aelitebond, Bisco.). Benzalkonium chloride solution is a chemical disinfectant widely used in medical and dental clinics for preoperative preparation of skin and mucosa due to its strong effect of cationic surface active detergent. Eighty freshly extracted bovine lower incisor were grinded labially to expose flat dentin surface, and then were acid-etched with 10 % phosphoric acid for 15 second, water-rinsed, and dried for 10 second with air syringe. The specimens were randomly divided into 8 groups of 10 teeth. The specimens of control group were remoistured with water and the specimens of experimental groups were remoistured with 0.1 %, 0.5 %, and 1.0 % benzalkonium chloride solution respectively. And then, the Aelitefil composite resin was bonded to the pretreated surface of the specimens by use of All-bond 2 dentin bonding system or Aelitebond dentin bonding system in equal number of the specimens. The bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured, the mode of failure was observed, the fractured dentin surface were examined under scanning electron microscopy, and FT-IR spectroscopy was taken for the purpose of investigating the changes of the dentin surface pretreated with benzal konium chloride solution followed by each primer of the dentin bonding systems. The results were as follows : In the group of bonding with NTG-GMA/BPDM dentin bonding agent(All-bond 2), higher tensile bond strength was only seen in the experimental group remoistured with 0.1 % benzal konium chloride solution than that in water-remoistured control group(p<0.05). In the group of bonding with DSDM dentin bonding agent (Aelitebond), no significant differences were seen between the control and each one of the experimental group(p<0.05). Higher tensile bond strength were seen in NTG-GMAIBPDM dentin bonding agent group than in DSDM dentin bonding agent group regardless of remoistur ization with benzal konium chloride solution. On the examination of failure mode, cohesive and mixed failure were predominantly seen in the group of bonding with NTG-GMAIBPDM dentin bonding agent, while adhesive failure was predominantly seen in the group of bonding with DSDM dentin bonding agent. On SEM examination of fractured surfaces, no differences of findings of primed dentin surface between the groups with and without remoisturization with benzal konium chloride solution. FT-IR spectroscopy taken from the control and the experimental group reve::.led that some higher absorbance derived from the primers binding to dentin surface was seen at the group pretreated with 0.1 % benzal konium chloride solution than at the control group of remoisturizing with water.

• Korean Journal of Soil Science and Fertilizer
• /
• v.12 no.2
• /
• pp.83-89
• /
• 1979

To improve the physico-chemical properties of sandy alluvial soils for paddy rice, several soil amendments such as wollastonite, dolomite adding red earth and compost were applied compositely. The results are summarized as follows. 1. The application of soil amendments caused an increase of calcium, magnesium and silica contents in the soils, and it was also possible to maintain a high pH during the cropping season. 2. Among the mineral elements in the plant, calcium and silica content were increased by the treatment of adding red earth, dolomite and wollastonite. 3. By the application of wallastonite and dolomite, the phosphorous content in the plant decreased in comparison with no-amendment treatment, and the potash in the plant also decreased after the ear formation stage of the rice. 4. The most desirable treatment (adding red earth+dolomite+extra N) resulted in 19% increase of rice yield, while the composite of wollastonite and compost brought 10% yield increase. The high ripeding ratio was the factor which influenced the yield favorably.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.664-669
• /
• 2011

Wet noodles with different percentages of amaranth powder were prepared and their cooking characteristics were evaluated. The cooking quality, mechanical textural properties, and a sensory evaluation was conducted with the prepared noodles. Cooked noodle properties, weight, and volume decreased as amaranth content of the wheat flour increased, whereas turbidity and water absorption of the soup increased, except for cooked noodles with 30% amaranth. The L-value of the raw and cooked noodles decreased significantly with increasing amaranth powder content. The a- and b-values increased with increasing amounts of added amaranth powder. The L-value of the raw and cooked noodles with amaranth was significantly lower than that of the control, and the a-value was lower than that of the control, whereas the b-value was higher than that of the control for both raw and cooked noodles. A texture profile analysis of the raw noodles showed significantly higher levels of hardness, cohesiveness, gumminess, chewiness, and springiness in the amaranth noodles compared to those in the control; the values for adhesiveness were not significantly different. The hardness, gumminess, springiness, and chewiness of the cooked noodles decreased in proportion to the quantity of added amaranth. The springiness, adhesiveness, and cohesiveness of cooked noodles with amaranth decreased slightly. Overall, the results of a sensory evaluation revealed that the cooked noodles with amaranth had higher values than those of the control, except for overall acceptability. Amaranth added at a concentration of up to 30% increased brown color and the peculiar amaranth odor. In a sensory evaluation, cooked noodles with 20% amaranth powder were preferred more than the other noodles for overall acceptability.