• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.466-471
• /
• 2017

SOTM is a device for the satellite communication on the move. Many studies are conducted on microstrip, waveguide and array antenna for the low profile of the SOTM's antenna. But those antennas have a problem that is difficult to adjust the polarization, and for that reason we have studied the parabolic antenna structure. The general form of parabolic reflector structure is circular, but we used cut-off shape reflector by cutting the upper and lower reflector for low profile antenna. Accordingly, this results in the decrease of reflector area which causes reduced gain and G/T ratio. In order to solve this problem, we have transformed and designed the sub reflector for improving the efficiency and gain of the cut- off shape parabolic antenna.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.620-628
• /
• 2014

This paper describes the analysis results of channel characteristics in the operating area of satellite OTM (On-The-Move) terminal. The communication channel between the Koreasat-5 and OTM terminal on a test car was measured and recorded in downtown of Daejeon, using the received beacon signal of around 20 GHz. And the measurement data were statistically analyzed and then compared with highway and national road environments. The statistical evaluation of satellite channel was conducted by using probability density function and Markov model and then presented average connection duration(ACD), average fade duration(AFD), and level crossing rate(LCR) of downtown environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.607-617
• /
• 2014

This paper proposed the M&S(Modeling & Simulation) method of channel characterization of satellite communication in the operating area of satellite OTM(On-The-Move) terminal. In M&S, received signal profile was acquired by HTZ warfare software which uses 3 dimensional map including building, road information and geographical features, and then was analyzed statistically. And a received signal profile and its statistics from M&S data were compared with those from measured data. The research showed that the simulated received signal profile matched the measured one about 74.8 percent and simulated statistics matched well as roadside trees were excluded.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.635-642
• /
• 2012

The Packet radio C2OTM(Command and Control On The Move) for Command, Control and situational awareness in communication environment of current Combat Net Radio Network is required in a relay transmission techniques. This is to assure the reliability of information transfer, and extend Wireless Coverage and overcome Communication obstacles of mountainous terrain. For the reliability of information transmission in tactical environment, Ad hoc Networking is necessary considering communication environment and an appropriate application of error correction. In this study, We propose a on-demand SDR algorithm that is currently being applied the FEC, Golay, Repetition Code. This enhanced relay transfer uses Ack Reply in tactical operating environment of MIL-STD-188-220 Protocol.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.147-155
• /
• 2015

In this paper, we consider a mobile sensor network for monitoring a polluted area where human beings cannot access. Due to the limited sensing range of individual unmanned vehicles, they need to cooperate to achieve an effective sensing coverage and move to a more polluted region. In order to address the limitations of sensing and communication ranges, we propose a hazardous substance monitoring network based on virtual force algorithms, and develop a testbed. In the considered monitoring network, each unmanned vehicle achieves an optimal coverage and move to the highest interest area based on neighboring nodes sensing values and locations. By using experiments based on the developed testbed, we show that the proposed monitoring network can autonomously move toward a more polluted area and obtain a high weighted coverage.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.142-148
• /
• 2023

In Modern days, Self-driving for modern people is an absolute necessity for transportation and many other reasons. Additionally, after the outbreak of COVID-19, driving by oneself is preferred over other means of transportation for the prevention of infection. However, due to the constant exposure to stressful situations and chronic fatigue one experiences from the work or the traffic to and from it, modern drivers often drive under drowsiness which can lead to serious accidents and fatality. To address this problem, we propose a drowsy driving prevention learning model which detects a driver's state of drowsiness. Furthermore, a method to sound a warning message after drowsiness detection is also presented. This is to use MoveNet to quickly and accurately extract the keypoints of the body of the driver and Dense Neural Network(DNN) to train on real-time driving behaviors, which then immediately warns if an abnormal drowsy posture is detected. With this method, we expect reduction in traffic accident and enhancement in overall traffic safety.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.14-23
• /
• 2021

The Army is making efforts to increase combat power by incorporating technologies related to the Fourth Industrial Revolution into the field of defense. In order to utilize these technologies, it is necessary to develop a military tactical communication system that enables transmission and reception of data between command and control system and weapon systems. Therefore, in this paper, we analyze the tactical communication systems of the other countries, derive the limitations of the tactical communication system currently operating in the military. And, a multi-layered integrated operation structure centered on satellites and plans to provide communication on the move to small units are reviewed. Then, we present the necessity of a large-capacity transmission speed by predicting the amount of data that will be generated from weapon systems of the future, and a plan to efficiently manage the network using intelligent network technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2298-2306
• /
• 2014

In this paper, we propose an open loop power control algorithm to control transmission power of the On-The-Move(OTM) Satcom terminal in GEO satellite communication environment. The proposed algorithm identifies the current channel state restricted by an obstacle or an antenna depointing loss based on the received beacon signal strength. On the basis of the determined signal attenuation causes, the OTM Satcom terminal turns off the RF output when an antenna tracking is failed. If the OTM Satcom terminal experiences a channel blockage by an obstacle, the terminal spreads the transmit data to increase data reception probability. To evaluate the performance of the proposed algorithm, we compare an adjacent satellite interference level and an outage probability. The results show the performance of the proposed algorithm is better than that of the conventional algorithm.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.93-101
• /
• 2020

Shipyards are potential environments for using IoT services, sensor networks, and delay tolerant networks. Simulations of those services and networks strongly rely on human mobility models. Results obtained with an unrealistic model may not reflect the true performance of applications, protocols, and algorithms in a shipyard. A lot of synthetic models for human movements have been studied but most of them are generic and focus on the daily movements of humans on city scales. Nevertheless, workers in shipyards have unique movement characteristics such as movement speed, pause time, and attractions places. For instance, workers usually move to some places, where they work, and rarely move to other places in the factory. Movement characteristics of workers not only depend on workers but also on tasks, which they do. For instance, workers, who paint ships, have similar movement speed and pause time. Hence, in this paper, human movements in shipyards are studied. We propose a new human mobility model called the human mobility mode in shipyards (MIS). In MIS, workers are classified into multiple types. Movement characteristics of a worker are similar to other workers in the same type. Based on the visiting probability, workers have some places, where they frequently visits, and some places, where they rarely visit. We analyze real mobility traces and studie to achieve human movement characteristics from real traces. The results show that MIS provides a well-match to the movement characteristic from real traces.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.5
• /
• pp.163-172
• /
• 2014

The Scale Invariant Feature Transform (SIFT) has been widely used in a lot of applications for image feature matching. Such a transform allows us to strong matching ability, stability in rotation, and scaling with the variety of different scales. Recently, it has been made one of the most successful algorithms in the research areas of copy-move forgery detections. Though this transform is capable of identifying copy-move forgery, it does not widely address the possibility that counter-forensics operations may be designed and used to hide the evidence of image tampering. In this paper, we propose a targeted counter-forensics method for impeding SIFT-based copy-move forgery detection by applying a semantically admissible distortion in the processing tool. The proposed method allows the attacker to delude a similarity matching process and conceal the traces left by a modification of SIFT keypoints, while maintaining a high fidelity between the processed images and original ones under the semantic constraints. The efficiency of the proposed method is supported by several experiments on the test images with various parameter settings.