• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.170-176
• /
• 2007

In this paper, we improve performance for system when the carrier recovery signal is not perfect in the multipath mobile wireless communication fast fading channel based on DS-CDMA system. In the case, we use the phase estimation, diversity and adaptive FEC code technique in order to overcome this carrier phase error and mobile wireless fading. As a results in DS-CDMA system, we know that the appropriate use of diversity and adaptive FEC code technique reduced considerably performance degradation due to phase error.

• Journal of Information Display
• /
• v.2 no.2
• /
• pp.32-38
• /
• 2001

PDP(plasma display panel) represents the gray levels by the pulse number modulation technique that results in undesirable dynamic false contours on moving images. This paper proposes a LUT(Look-up table) based error diffusion algorithm for reduction of the dynamic false contours. A quantitative measure of the dynamic false contours is defined first. The measure of the dynamic false contours is calculated through simulation of every gray level combination of two consecutive frames. Based on the calculated measures, a modified gray level for a pair of gray levels of two consecutive frames is chosen to reduce the dynamic false contours. The chosen gray levels serve as contents of a gray level conversion LUT. Given a pair of gray levels of two consecutive frames, the gray level of current frame is modified based on the gray level conversion LUT. The new gray level is displayed on PDP. An error diffusion algorithm is, then, applied to compensate for the differences in the gray levels.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.237-241
• /
• 2012

In wireless sensor networks, the importance of transporting data correctly with reliability is increasing gradually along with the need to support communications between the nodes and sink. Data flow from the sink to the nodes requires reliability for control or management that is very sensitive and intolerant of error; however, data flow from the nodes to the sink is relatively tolerant. In this paper, with emphasis on the data flow from the sink to the nodes, we propose a mechanism that considers accurate transport with reliability hop-by-hop. During the process of sending the data, if errors occur or data is missing, the proposed mechanism supports error recovery using a fixed window with selective acknowledgment. In addition, this mechanism supports congestion control depending on the buffer condition. Through the simulation, we show that this mechanism is accurate, reliable, and proper for transport in wireless sensor networks.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.76-83
• /
• 2019

In this paper, we propose the beamforming algorithm for the performance improvement of MIMO MC-CDMA system. The proposed multibeamforming of MIMO MC-CDMA structure having the same number of beamformer as the number of transmit antenna is derived by calculating the error signals between the coded pilot symbols and the corresponding received signals from the multiple transmitters of the desired user in the frequency domain, transforming the frequency-domain error signals into time-domain error signals, and updating the weights of the multibeamformer in the time-domain in the direction minimizing the mean squared error (MSE). The proposed approach can track each direction of arrival (DOA) of the signals from multi-antennas of a desired user. The performance improvement is investigated through computer simulation by applying the proposed approach to MIMO MC-CDMA system in a multipath fading channel with multiusers.

• Journal of information and communication convergence engineering
• /
• v.4 no.4
• /
• pp.131-135
• /
• 2006

In this paper, we discusses that the theoretical analysis is made for the performance of FS MC-CDMA by the aid of the Nakagami fading channels and the block error probabilities of the FS MC-CDMA in Nakagami fading channel are presented. The channel fading speed, slow or fast, is considered in evaluating block error probabilities. The effectiveness of diversity combining in improving block error performance is examined.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.39-42
• /
• 2001

This paper proposes the design technique of memory sparing to overcome memory hard error Memory Sparing is used to increase the reliability and availability of commercial, military and space computer such as a Data Server, Communication Server, Flight Computer in airplane and On-Board Computer in spacecraft. But the documents about this technique are rare and hard to find. This paper has some useful information about memory error correction and memory error management.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.69-74
• /
• 2017

Due to the advantage of communication coverage extension and removement of shadowing area, relay can be applied in various wireless communication systems. In this paper, we analyze performance of downlink with dual-hop communication systems which use a relay in railway environments. We adopted asymmetric communication system which use coherent modulation scheme in base station-relay link and differential modulation scheme in relay-destination link. The performance of communication system is analyzed using symbol error rate, and performance comparison with the systems which adopts fully coherent scheme is studied. We also investigate the performance of system depending on relay distance and energy allocation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1688-1695
• /
• 2016

Underwater communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. The excessive multipath encountered in underwater communication channel creates inter symbol interference, which is a limiting factor to achieve a high data rate and bit error rate performance. Therefore, to increase throughput efficiency and improve performance, this paper consider FTN (Faster-than-Nyquist) signalling based on turbo equalization. FTN signalling is a technique of transmitting information at a rate higher than the allowed Nyquist limit. This paper presented efficient decoder structure of FTN transmission in the environment of multipath underwater channel and we compare the performance between FTN method and conventional punctured method in lake experimentation. As a results of lake experiment, we confirmed FTN method based on turbo equalization is applicable and efficiency in underwater communication.

• The Journal of Information Technology
• /
• v.7 no.3
• /
• pp.37-45
• /
• 2004

The representative communication method which is applied in the low-speed power line communication modem with 60bps is single carrier method. It has been used mainly for the control. The single carrier method is very sensitive to a power line communication channel environment. Specially, the severe attenuation of the transmission signal according to the notch characteristics of channel becomes the main cause of communication error. Domestic power line channel environment has this notable feature. In this paper, we implemented the low-speed power line communication system which used the chirp signal method to be strong in notch and noise characteristics. In this research, we proposed the method which transmits 1- '1 Unit symbol Chirp signal' with a 100${\mu}s$ time within 1ms for 1 bit. Also it applied for the Convolution code for an error correction and the Manchester code for a collision perception and an error detection. It used the method which uses the bit correlator for signal detection in the receiver parts. We confirmed that the communication method of the chirp method has a excellent performance compared to single carrier methods with a result of experiment of the low-speed power line communication system with the 60bps.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.371-378
• /
• 2012

This paper presents a timing recovery method using Gardner TED (Timing Error Detector) with a Peak Detector using Parabola Peak Interpolation in underwater acoustic communication. This method will have an eye to improve phase converge speed of timing recovery and reduced amount of Tx data. The OQPSK(Offset Quadrature Phase Shift Keying) modulation technique was considered. The proposed algorithm has faster recovery speed and more accurate than Gardner TED because the sampling values in the proposed algorithm are moved persistingly to maximum or minimum point using parabolic peak interpolation. when simulation performed using Preposed method, it improved BER (Bit Error Rate) performance about 23% And to evaluate the performances of the proposed algorithm the sea trial was performed in the Korean East Sea. And distance of a transmitter-receiver is 3 km each other. As a result, the proposed algorithm outperforms better BER performance about 20% of timing recovery than the Gardner method. Also Proposed method improved converge speed of timing recovery about 1.4 times better than Gardner method.