• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.235-241
• /
• 2002

The process of energy separation in a low pressure vortex tube with air as a working medium is studied In detail. Experimental data of the temperature of the cold and hot air leaving the vortex tube are presented. The variation of the maximum wall temperature along the inner surface of the vortex tube and the temperature distribution in the vortex tube provides useful information about the location of the stagnation point of the flow field at the axis of the vortex tube. In this study Outer tube is used for the application of Diesel engine exhaust. The hot gas flow is fumed 180° and passes the outside of the vortex tube a second time heating it. From this geometric setup of a vortex tube the effects of energy separation and the prediction of the ignition of Diesel Soot is presented by experimental data.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.825-828
• /
• 2010

항공용 가스터빈 엔진은 운용 범위가 넓으며 고고도에서 운용되므로 극한 환경조건에서의 운용을 요구하며 높은 신뢰성을 요구한다. 따라서 본 연구에서는 혹독한 환경에서 높은 수준의 신뢰성 있는 연소기 개발을 위한 연소기 리그시험 및 엔진 단위의 운용 안정성 평가를 수행, 최적화하였으며, 엔진개발 단계에서 수립된 시동로직을 반영하여 고고도 운전영영에서의 시동 및 운용 안정성을 검증하였다. 리그 및 엔진시험 결과, air swirler가 장착된 인젝터를 적용할 경우, 20kft Hot day 및 $-40^{\circ}C$에서 정상적인 운용 및 시동이 이루어졌다.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1735-1742
• /
• 1996

An entrained flow gasifier simulating the cold mode was tested to estimate its performance for coal gasification and flow characteristics with a developed high speed impinging jet nozzle. The burner was designed for high temperature and high pressure(HTHP) conditions, especially for IGCC(Integrated Coal Gasification Combined Cycle). In order to get proper size of droplets for high viscous liquid such as coal slurry, atomization was achieved by impacting slurry with high speed (over 150m/sec) secondary gas (oxygen/or air)/ Formed water droplets were ranged between 100.mu.m to 20.mu.m in their sizes. The flow characteristics in the gasifier was well understood in mixing between fuel and oxidizer. Both external and internal recirculation zones were closely investigated through experimentation with visualization and numerical solutions from FLUENT CODE.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.818-826
• /
• 2004

The spray-induced mixing characteristics and thermal decomposition of aqueous urea solution into ammonia have been studied to design optimum sizes and geometries of the mixing chamber in SCR(Selective Catalytic Reduction) system. The cold flow tests about the urea-injection nozzle were performed to clarify the parameters of spray mixing characteristics such as mean diameter and velocity of drops and spray width determined from the interactions between incoming air and injected drops. Discrete particle model in Fluent code was adopted to simulate spray-induced mixing process and the experimental results on the spray characteristics were used as input data of numerical calculations. The simulation results on the spray-induced mixing were verified by comparing the spray width extracted from the digital images with the simulated Particle tracks of injected drops. The single kinetic model was adopted to predict thermal decomposition of urea solution into ammonia and solved simultaneously along with the verified spray model. The hot air generator was designed to match the flow rate and temperature of the exhaust gas of the real engines The measured ammonia productions in the hot air generator were compared with the numerical predictions and the comparison results showed good agreements. Finally, we concluded that the design capabilities for sizing optimum mixing chamber were established.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.9-16
• /
• 2001

When large size nozzle with low jet velocity is used, the buoyancy effect arises from the density difference among propane, air, and burnt gas. Flame characteristics in such buoyant jets have been investigated numerically to elucidate the effect of buoyancy on lifted flames. It has been demonstrated that the cold jet has circular cone shape since upwardly injected propane jet decelerates and forms stagnation region. In contrast to the cold flow, the reacting flow with a lifted flame has no stagnation region by the buoyancy force induced from the burnt gas. To further illustrate the buoyancy effect on lifted flames, the reacting flow with buoyancy is compared with non-buoyant reacting flow. Non-buoyant flame is stabilized at much lower height than the buoyant flame. At a certain range of fuel jet velocities and fuel dilutions. an oscillating flame is demonstrated numerically showing that the height of flame base and tip vary during one cycle of oscillation. Under the same condition. non-buoyant flame exhibits only steady lifted flames. This confirms the buoyancy effect on the mechanism of lifted flame oscillation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.225-227
• /
• 2011

핀/슬롯 그레인 및 내삽노즐을 가진 고체로켓모터 내부와 동일한 기하학적 형상을 가진 축소형 표면 분사 시험모델을 사용하여 연소유동장을 모사하였다. 내삽노즐 인접부에서의 복잡한 유동패턴에 대한 유동가시화가 수행되었으며, 내부유동들 간의 상호작용으로 추정되는 슬롯 출구에서의 대칭 와류구조 및 원주방향 유동이 나타났다.

• 한국연소학회지
• /
• 제21권3호
• /
• pp.1-6
• /
• 2016

The effect of applied electric fields on jet flow instability was investigated experimentally by varying the direct current (DC) voltage and the alternating current (AC) frequency and voltage applied to a jet nozzle. We aimed to elucidate the origin of the occurrence of twin-lifted jet flames in laminar jet flow configuration, which occur when AC electric fields are applied. The results indicate that a twin-lifted jet flames originates from cold jet instability, caused by interactions between negative ions in the jet flow via electron attachment as $O_2+e{\rightarrow}O_2{^-}$ when AC electric fields are applied. This was confirmed by experiments in which a variety of gaseous jets were ejected from a nozzle to which DC voltages and AC frequencies and voltages were applied, with ambient air between two deflection plates connected to a DC power source. Experiments in which jet flows of several gases were ejected from a nozzle and AC electric fields were applied in coflow-nitrogen provided further evidence. The flow instability occurred only for oxygen and air jets. Additionally, jet instability occurred when the applied frequency was less than 80 Hz, corresponding to the characteristic collision response time. The effect of AC electric fields on the overall structure of the jet flows is also reported. Based on these results, we propose a mechanism to reduce jet flow instability when AC electric fields are applied to the nozzle.

• 항공우주기술
• /
• 제5권2호
• /
• pp.37-46
• /
• 2006

항공기 운항 시 나타날 수 있는 외부환경 조건은 상당히 가혹하다. 특히 차가운 대기조 건에서 항공기 운항 시에는 미세한 얼음 알갱이들에 의해 항공기의 성능에 큰 영향을 줄 수 있다. 기체의 날개 앞전에 얼음이 부착되면 날개의 형상을 변화시켜 비행특성을 저하시 키며, 엔진의 흡입구 앞전에 부착하게 되면 압축기 블레이드의 손상뿐 아니라 성능 및 항 공기의 안전에도 영향을 미치게 된다. 얼음 알갱이들로 인한 여러 가지 상황 중 엔진 입구 로 유입되거나 엔진 압축기 블레이드에 생성되는 얼음 알갱이들로 인한 엔진 성능 변화 추이를 분석하기 위하여 결빙모사장치의 제작을 수행하였다. 결빙모사장치는 FAA에서 정 의한 결빙조건을 만족할 수 있도록 제작하였으며, 결빙모사장치와 기존 액체공기시스템을 이용하여 결빙이 생성됨을 시험을 통하여 확인하였다.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.94-100
• /
• 2019

This study was conducted on a high-temperature/high-pressure washer in which low-pressure cold water in a boiler is heated to a temperature range of $70{\sim}80^{\circ}C$ by supplying diesel combustion heat. The high-temperature water is sent to a compressor to increase its pressure to 200 bar, thereby making high-temperature/high-pressure water, which is sprayed through a spray nozzle. In the results of this study, the spray temperature of the high-pressure washing was shown to be the highest when the ratio between the actual amount of combustible air and the theoretical amount of air was 1:1 and the energy consumption rate of the low-pressure boiler type high-pressure washer was shown to be much lower than that of the high-pressure boiler type high-pressure washer.

• 한국항해항만학회지
• /
• 제37권2호
• /
• pp.129-135
• /
• 2013

동결농축폐수처리의 기술은 열역학적 효율이 높고 에너지 소비량이 작아 중소규모로 적합하며, 용수 재활용과 융해열의 냉열 재이용이 가능한 장점을 가지고 있다. 본 연구에서는 폐수 처리효율이 높은 동결농축폐수처리장치의 개발을 위해 수직원관 형태의 제빙관을 대상으로 염화나트륨수용액을 이용한 기초 실험을 통해 냉각면 온도, 기포 분사 방법에 따른 분리 성능을 확인 후 대표적 중금속인 Pb, Cr 수용액을 대상으로 냉각면 온도, 기포 직접 분사, 과냉각을 방지하기 위한 용질을 포함하지 않은 초기 빙층 두께의 영향에 따른 중금속 분리 성능을 실험 통해 확인하였다. 실험결과 두 수용액에서 모두 냉각면의 온도가 낮을수록 동결층의 성장속도가 빨라지고 용질의 분리효율이 저하되었다. 기포를 분사하는 방법 중에는 환모양의 노즐을 통해 동결계면에 직접 분사하는 방법이 원통벽면을 통해 간접 분사하는 것 보다 분리효율이 높게 나타났으며, 초기 빙층의 두께에 따른 실험에서는 1mm 보다는 5mm의 두께에서 분리효율이 더 우수한 것으로 나타났다.