• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.494-501
• /
• 2013

The convolution code(CC) of code rate 1/2 as a forward error correction (FEC) in Quadrature Phase Shift Keying (QPSK) is applied to decrease bit error rate (BER) by background noise and multipath in shallow water acoustic channel. Ratio of transmitting signal bandwidth to channel coherence bandwidth is defined as frequency selectivity index. BER and bit energy-to-noise ratio gain of transmitted signal according to frequency selectivity index are evaluated. In the results of indoor water tank experiment, BER is well matched theoretical results at frequency selectivity index less than about 1.0. And bit energy-to-noise ratio gain is also matched theoretical value of 5 dB. BER is effectively decreased at frequency selective multipath channel with frequency selectivity index higher than 1.0. But bit energy-to-noise ratio greater than a certain size in terms of CC weaving is effective in reducing bit errors. In the results, the defined frequency selectivity index in this study could be applied to evaluate a performance of CC in multipath channel. Also it could effectively reduced BER in a low speed underwater acoustic communication system without an equalizer.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.1
• /
• pp.37-47
• /
• 2008

Exploitation of address generation units which are typically provided in DSPs plays an important role in DSP code generation since that perform fast address computation in parallel to the central data path. Offset assignment is optimization of memory layout for program variables by taking advantage of the capabilities of address generation units, consists of memory layout generation and address pointer assignment steps. In this paper, we propose an effective address pointer assignment method to minimize the number of address calculation instructions in DSP code generation. The proposed approach reduces the time complexity of a conventional address pointer assignment algorithm with fixed memory layouts by using minimum cost-nodes breaking. In order to contract memory size and processing time, we employ a powerful pruning technique. Moreover our proposed approach improves the initial solution iteratively by changing the memory layout for each iteration because the memory layout affects the result of the address pointer assignment algorithm. We applied the proposed approach to about 3,000 sequences of the OffsetStone benchmarks to demonstrate the effectiveness of the our approach. Experimental results with benchmarks show an average improvement of 25.9% in the address codes over previous works.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1290-1298
• /
• 2000

Turbo Code decoder is an iterate decoding technology, which extracts extrinsic information from the bit to be decoded by calculating both forward and backward metrics, and uses the information to the next decoding step Turbo Code shows excellent performance, approaching Shannon Limit at the view of BER, when the size of Interleaver is big and iterate decoding is run enough. But it has the problems which are increased complexity and delay and difficulty of real-time processing due to Interleaver and iterate decoding. In this paper, it is analyzed that MAP(maximum a posteriori) algorithm which is used as one of Turbo Code decoding, and the factor which determines its performance. MAP algorithm proceeds iterate decoding by determining soft decision value through the environment and transition probability between all adjacent bits and received symbols. Therefore, to improve the performance of MAP algorithm, the trust between adjacent received symbols must be ensured. However, MAP algorithm itself, can not do any action for ensuring so the conclusion is that it is needed more algorithm, so to decrease iterate decoding. Consequently, MAP algorithm and Turbo Code performance are analyzed in the nongaussian channel applying Robust equalization technique in order to input more trusted information into MAP algorithm for the received symbols.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.185-192
• /
• 2019

The introduction of smart technology provides accuracy, safety, and efficiency to both physicians and patients. Although interest in a clear aligner is increasing among users worldwide, the current clear aligner requires a visit to the hospital every one or two weeks for replacement, which is a very cumbersome process. There is also confusion among dentists and patients because about 40 to 80 devices are made, and calibration is done based on the order and duration of the clear aligner. Therefore, this study designed and developed a clear aligner management system so that communication between the patient and dentist can be smoothly performed by inserting the QR code into the transparent correction device. As a result, the size of the QR code was recognized as $6{\ast}6mm^2$ which can be used in the oral and the recognition distance was 100% within 12 cm. Since the dentist can remotely manage the patient with the proposed system and improve the correction effect, it is possible to manage patients abroad, as well as domestically.

• Journal of Radiation Protection and Research
• /
• v.39 no.1
• /
• pp.46-53
• /
• 2014

For the case of radiation emergency, it is required to assess internal contamination of the public, including children as well as adults. The objective of the present study was to assess counting efficiency of a whole body counter by human body size and standing position of the measurement person. In this study, the FASTSCAN whole body counter used at National Radiation Emergency Medical Center of Korean Institute of Radiological and Medical Science was simulated by a radiation transport computer code. The simulation results of the counting efficiencies agreed well with measurements within the 2% of discrepancy for 4-year child and 5% for adults. The standing positions of the people were adjusted by body size to find the consistent trend of the counting efficiencies by human body size. Body size scaling factors of the whole body counter were derived to consider human body size and improve the measurement accuracy. The counting efficiency assessment methodology in this study can be successively used to improve the measurement accuracy when using a whole body counter for the case of radiation emergency.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2087-2089
• /
• 2003

The presence of narrowband interference (NBI) in Direct-sequence code division multiple access (DS/CDMA) systems is an inevitable problem when the interference is strong enough. The improvement in the system performance employs by adaptive narrowband interference suppression techniques. Basically there have been two types of method for narrowband interference suppression estimator/subtracter approaches and transform domain approaches. In this paper the focus is on the type of estimator/subtracter approaches. However, the binary direct sequence (DS) signal, that acts as noise in the prediction process is highly non-Gaussian. The case of a Gaussian interferer with known in an autoregressive (AR) signal or a digital signal and also in a sinusoidal signal (Tone) that included in is paper. The proposed NBI suppression is presence in an adaptive IIR notch filter for lattice structure and more powerful by using a variable step-size algorithm. The simulation results show that the proposed algorithm can significantly increase the convergence rate and improved system performance when compare with adaptive least mean square algorithm (LMS).

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.233-238
• /
• 2005

In general CELP(Code Excited Linear Prediction) type vocoders provide good speech qualify around 4.8kbps. Among them, G.723.1 developed for Internet Phone and video-conferencing includes two vocoders, 5.3kbps ACELP(Algebraic-CELP) and 6.3kbps MP-MLQ(Multi-Pulse Maximum Likelihood Quantization) In order to improve the speech qualify in CELP vocoder, in this paper. we proposed a new spectrum analysis algorithm with variable window In CELP vocoder, the spectrum of the synthesised speech signal is distorted because the fixed size windows is used for spectrum analysis. So we have measured the spectral leakage and in order to minimize the spectral leakage have adjusted the window size. Applying this method G.723.1 ACELP, we can got SD(Spectral Distortion) reduction 0.084(dB), residual energy reduction 6.3$\%$ and MOS(Mean Opinion Score) improvement 0.1.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.238-248
• /
• 2008

This study investigated mercury emission at various combustion conditions and analyzed mercury species in flue gas from coal combustion at a laboratory scale furnace in coal. The results of this study can be used to predict and to assess mercury emission at coal boilers and power plants. The coal used in the plants generally contains about $0.02{\sim}0.28\;mg$ of mercury per kg. Bituminous and anthracite coal used for the experiment contained 0.049 and 0.297 mg/kg of mercury, respectively. Mercury emissions during coal combustion at temperatures range of $600^{\circ}C$ to $1,400^{\circ}C$ was measured and analysed using Ontario Hydro method; the speciation changes were also observed in mercury emissions. The results showed higher fraction of elemental mercury than that of oxidised mercury at most temperatures tested in this experiment. The fraction of elemental mercury was lower in combustion of anthracite coal than in bituminous combustion. As expected, equilibrium calculations and real power plants data showed good similarity. The distribution of particle size in flue gas had the higher peak in size above $2.5\;{\mu}m$. However the peak of mercury enrichment in dust was at $0.3\;{\mu}m$, which could be easily emitted into atmosphere without filtration in combustion system. When the CEA(Chemical equilibrium and Application) code was used for combustion equilibrium calculation, Cl was found to be the important component effecting mercury oxidation, especially at the lower temperatures under $900^{\circ}C$.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.145-151
• /
• 2004

For wide-band spread spectrum communication systems such as IMT-2000, a digital matched filter is a key device for rapid spreading code synchronization. Although a digital matched filter can be implemented easily, large power consumption at the higher chip rate and large summation delay of longer chip length are the bottleneck of practical use. In this paper, we propose a optimized partial correlation digital matched filter structure which can be constructed of the so-called generalized hierarchical Golay sequence. a partial correlation structure can reduce the number of correlators, but enlarge the size of flip-flops. In this paper, The proposed approach focuses on efficient circuit size, power dissipation, maintaining the operating throughput. A proposed digital matched filter reduce the size of flip-flops by rounding method. and it reduces about 45 percentages of power dissipation and chip area as compared with digital matched filter which is not rounded. rounding. The proposed architecture was verified by using Xilinx FPGA.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.107-112
• /
• 2008

This paper investigates the variation of post-buckling behaviours of 2-dimensional shallow arch type truss after sizing optimization. The mathematical programming technique is used to produce the optimum member size of 2D arch truss against a central point load. Total weight of structure is considered as the objective function to be minimized and the displacement occurred at loading point and member stresses of truss are used as the constraint functions. The finite difference method is used to calculate the design sensitivity of objective function with respect to design variables. The postbuckling analysis carried out by using the geometrically nonlinear finite element analysis code ISADO-GN. It is found to be that there is a huge change of post-buckling behaviour between the initial structure and optimum structure. Numerical results can be used as useful information for future research of large spatial structures.