• 제목/요약/키워드: Code distribution

검색결과 1,268건 처리시간 0.026초

Three Dimensional Numerical Code for the Expanding Flat Universe

  • Min, Kyoung-W.
    • Journal of Astronomy and Space Sciences
    • /
    • 제4권2호
    • /
    • pp.101-106
    • /
    • 1987
  • The current distribution of galaxies may contain clues to the condition of the universe when the galaxies condensed and to nature of the subsequent expansion of the universe. The development of this large scale structure can be studied by employing N-body computer simulations. The present paper describes the code developed for this purpose. The computer code calculates the motion of collisionless matter acting under the force of gravity in an expanding flat universe. The test run of the code shows the error less than 0.5% in 100 iterations.

  • PDF

Vertical distributions of lateral forces on base isolated structures considering higher mode effects

  • Tsai, C.S.;Chen, Wen-Shin;Chen, Bo-Jen;Pong, Wen-Shen
    • Structural Engineering and Mechanics
    • /
    • 제23권5호
    • /
    • pp.543-562
    • /
    • 2006
  • Base isolation technology has been accepted as a feasible and attractive way in improving seismic resistance of structures. The seismic design of new seismically isolated structures is mainly governed by the Uniform Building Code (UBC-97) published by the International Conference of Building Officials. In the UBC code, the distribution formula of the inertial (or lateral) forces leads to an inverted triangular shape in the vertical direction. It has been found to be too conservative for most isolated structures through experimental, computational and real earthquake examinations. In this paper, four simple and reasonable design formulae, based on the first mode of the base-isolated structures, for the lateral force distribution on isolated structures have been validated by a multiple-bay three-story base-isolated steel structure tested on the shaking table. Moreover, to obtain more accurate results for base-isolated structures in which higher mode contributions are more likely expected during earthquakes, another four inertial force distribution formulae are also proposed to include higher mode effects. Besides the experimental verification through shaking table tests, the vertical distributions of peak accelerations computed by the proposed design formulae are in good agreement with the recorded floor accelerations of the USC University Hospital during the Northridge earthquake.

악성코드 유포 사이트 특성 분석 및 대응방안 연구 (A Study on Characteristic Analysis and Countermeasure of Malicious Web Site)

  • 김홍석;김인석
    • 정보보호학회논문지
    • /
    • 제29권1호
    • /
    • pp.93-103
    • /
    • 2019
  • 최근 드라이브 바이 다운로드 공격 기반의 웹사이트를 통한 랜섬웨어 악성코드 유포로 인해 웹사이트 서비스 마비, 일반 이용자 PC 파일 손상 등의 피해가 발생하고 있다. 따라서 악성코드 경유지 및 유포지 사이트의 현황과 추이 파악을 통해 악성코드 유포의 공격 대상 웹사이트 업종, 유포 시간, 악용되는 어플리케이션 종류, 유포되는 악성 코드 유형에 대한 특성을 분석하는 것은 공격자의 공격활동을 예측하고 대응이 가능하다는 점에서 의미가 크다. 본 논문에서는 국내 343만개의 웹사이트를 대상으로 악성코드 유포여부를 점검하여 탐지된 악성코드 경유지 사이트, 익스플로잇 사이트, 악성코드 유포지 사이트별로 어떠한 특징들이 나타나는지를 도출하고, 이에 대한 대응방안을 고찰하고자 한다.

A CODE FOR CALCULATING STATIC MODEL STELLAR ATMOSPHERES

  • Nouh, M.I.
    • 천문학회지
    • /
    • 제42권3호
    • /
    • pp.47-54
    • /
    • 2009
  • In this paper we present an independent FORTRAN code for calculating LTE-plane-parallel model atmospheres. The transfer equation has been solved using Avrett and Loeser method. It is shown that, using an approximate non-gray temperature distribution together with the iteration factors method (Simonneau and Crivellari) for correcting the temperature distribution reduce the number of iteration required to achieve the condition of radiative equilibrium. Preliminary results for pure helium model atmospheres are presented.

STARS: A 3D GRID-BASED MONTE CARLO CODE FOR RADIATIVE TRANSFER THROUGH RAMAN AND RAYLEIGH SCATTERING WITH ATOMIC HYDROGEN

  • Chang, Seok-Jun;Lee, Hee-Won
    • 천문학회지
    • /
    • 제53권6호
    • /
    • pp.169-179
    • /
    • 2020
  • Emission features formed through Raman scattering with atomic hydrogen provide unique and crucial information to probe the distribution and kinematics of a thick neutral region illuminated by a strong far-ultraviolet radiation source. We introduce a new 3-dimensional Monte-Carlo code in order to describe the radiative transfer of line photons that are subject to Raman and Rayleigh scattering with atomic hydrogen. In our Sejong Radiative Transfer through Raman and Rayleigh Scattering (STaRS) code, the position, direction, wavelength, and polarization of each photon is traced until escape. The thick neutral scattering region is divided into multiple cells with each cell being characterized by its velocity and density, which ensures flexibility of the code in analyzing Raman-scattered features formed in a neutral region with complicated kinematics and density distribution. To test the code, we revisit the formation of Balmer wings through Raman scattering of the far-UV continuum near Lyβ and Lyγ in a static neutral region. An additional check is made to investigate Raman scattering of O vi in an expanding neutral medium. We find a good agreement of our results with previous works, demonstrating the capability of dealing with radiative transfer modeling that can be applied to spectropolarimetric imaging observations of various objects including symbiotic stars, young planetary nebulae, and active galactic nuclei.

가우시안 이진 대칭 채널에서 쇄상부호의 최적 내.외 부호율에 관한 연구 (Optimum Inner and Outer Code Rates for Concatenated Codes in Gaussian Binary Symmetric Channels)

  • 이예훈
    • 한국위성정보통신학회논문지
    • /
    • 제9권2호
    • /
    • pp.110-113
    • /
    • 2014
  • 본 논문에서는 가우시안 이진 대칭 채널에서 쇄상부호를 사용할 때의 최적 내 외 부호율에 관하여 연구한다. 쇄상부호의 전체 부호율이 고정되어 있을 때, 내 부호율이 감소할수록 내 부호의 오류 검출 능력은 향상되지만, 반대로 외 부호의 오류 정정 능력은 감소하게 된다. 이러한 trade-off 관계를 이용하여 본 논문에서는 쇄상부호의 최대 성능 이득을 얻기 위한 내 부호와 외 부호에의 최적의 중복(redundancy) 분포에 관하여 연구한다. 분석한 결과, 가우시안 이진 대칭 채널에서는 외 부호화율을 최소화하고 내 부호화율을 최대화함으로써 전체 쇄상부호 시스템의 성능을 극대화 시킬 수 있음을 알 수 있었다.

물류창고 시설의 인명안전기준 개선 방안에 관한 연구 (A Study on the Improvement of Life Safety Code for Logistics Warehouse Facilities)

  • 김윤성;진승현;이병흔;권영진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 봄 학술논문 발표대회
    • /
    • pp.98-99
    • /
    • 2021
  • The number of fires in the Korean distribution warehouse increased by about 350 from 1,070 in 2014 to 1,416 in 2020. In addition, the fire load increases with the scale of the distribution warehouse, and even if the automatic sprinkler operates, there is a limit to the direct intrusion of the water source into the ignition source, and the detector is often installed on a high ceiling. The sensing time is often delayed. In order to improve the fire safety of such distribution warehouses, the US NFPA stipulates in detail the contents related to the facility, such as sprinkler water discharge standards, rack-type warehouse installation height restrictions, and regulations on collection and equipment. However, in Japan, the goods loaded inside the distribution warehouse are not classified in detail, and it is considered that the fire safety for the distribution warehouse is low due to the relaxation regulations of the fire prevention section. Therefore, in this study, common problems are classified into material, spatial, and safety management characteristics through the cases of distribution warehouse fires that occurred in Korea and abroad, and the problems related to distribution warehouses in Korea and abroad are compared and analyzed. And present basic materials for improving the life safety standards of future distribution warehouse facilities.

  • PDF

격납건물종합누설률시험 주기연장을 위한 웹기반 소외결말분석 프로그램 개발 및 적용 (Development of Web-based Off-site Consequence Analysis Program and its Application for ILRT Extension)

  • 나장환;황석원;오지용
    • 한국안전학회지
    • /
    • 제27권5호
    • /
    • pp.219-223
    • /
    • 2012
  • For an off-site consequence analysis at nuclear power plant, MELCOR Accident Consequence Code System(MACCS) II code is widely used as a software tool. In this study, the algorithm of web-based off-site consequence analysis program(OSCAP) using the MACCS II code was developed for an Integrated Leak Rate Test (ILRT) interval extension and Level 3 probabilistic safety assessment(PSA), and verification and validation(V&V) of the program was performed. The main input data for the MACCS II code are meteorological, population distribution and source term information. However, it requires lots of time and efforts to generate the main input data for an off-site consequence analysis using the MACCS II code. For example, the meteorological data are collected from each nuclear power site in real time, but the formats of the raw data collected are different from each site. To reduce the efforts and time for risk assessments, the web-based OSCAP has an automatic processing module which converts the format of the raw data collected from each site to the input data format of the MACCS II code. The program also provides an automatic function of converting the latest population data from Statistics Korea, the National Statistical Office, to the population distribution input data format of the MACCS II code. For the source term data, the program includes the release fraction of each source term category resulting from modular accident analysis program(MAAP) code analysis and the core inventory data from ORIGEN. These analysis results of each plant in Korea are stored in a database module of the web-based OSCAP, so the user can select the defaulted source term data of each plant without handling source term input data.

콘크리트 압축 응력분포에 관한 실험적 연구 (An Experimental Study on Concrete Stress Distribution in Compression Zone)

  • 이재훈;임강섭;최진호;최영호;황도규;유현재
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
    • /
    • pp.79-80
    • /
    • 2009
  • Compression stress distribution used to concrete structure design substitutes equivalent rectangle, trapezoid and parabola-rectangle stress block for actual concrete stress distribution. Presently, rectangular stress block of Korea Concrete Design Code is equal to it of ACI code that doesn't reflect the material feature of the high strength concrete. The study does an experiment on concrete compression stress distribution to know the material feature of the concrete used in korea.

  • PDF

코드 분포의 선형 회귀를 이용한 프로그램 유사성 분석 (Similarity Analysis of Programs through Linear Regression of Code Distribution)

  • 임현일
    • 디지털콘텐츠학회 논문지
    • /
    • 제19권7호
    • /
    • pp.1357-1363
    • /
    • 2018
  • 정보 기술의 발전과 더불어 인공 지능 및 기계 학습 분야는 다양한 응용 분야에서 성능을 인정받고 있으며, 다양한 응용 분야로 확대되고 있다. 본 논문에서는 기계 학습 방법을 응용한 소프트웨어 분석 방법을 제안한다. 소프트웨어의 특성을 표현하기 위해 소프트웨어의 코드 분포를 분석하고 이 정보를 기계 학습 방법인 선형 회귀를 통해 분석함으로써 유사 소프트웨어를 분석할 수 있는 방법을 제안한다. 소프트웨어의 특성은 프로그램 내에 포함된 명령어에 의해 표현될 수 있으며, 명령어의 분포 정보를 학습 데이터로 활용하였다. 또한, 학습 데이터를 통한 학습 과정은 소프트웨어 유사성 분석을 위한 선형 회귀 모델을 구성한다. 본 논문에서 제안한 방법은 구현 및 실험을 통해 정확성을 검증한다. 본 논문에서 제안한 방법은 소프트웨어의 유사성을 판단할 수 있는 기본 기술로 활용될 수 있을 것으로 기대된다. 또한 기계 학습 방법을 통한 소프트웨어 분석 기술에 응용될 수 있을 것으로 기대된다.