• Journal of the Korean Wood Science and Technology
• /
• 제33권4호통권132호
• /
• pp.15-22
• /
• 2005

현악기용 도료가 현악기의 음향성능에 미치는 영향을 조사하기 위해 음향분석장치(FFT)와 점탄성 분석장치(DMTA, dynamic mechanic thermal analyzer)를 이용하여 목재악기용 도료의 음향적 성능을 평가하였다. 목재악기용으로 사용된 도료는 악기용 우레탄계 상도도료, 오일 스테인계 도료, 천연바니쉬, 캐슈 도료 및 자외선 경화형 에폭시 도료를 사용하였다. 형성된 도막의 음향적인 특성은 FFT 분석기에서 측정된 공명주파수와 댐핑값(damping factor)과 DMTA에서 측정된 tan ${\delta}$를 통하여 유추하였다. FFT에서 측정된 공명주파수와 댐핑값으로부터 도막이 가지는 음향특성에 대해 분석하였다. 측정된 도막의 점탄성적인 특성과 음향적 특성을 검토한 결과 악기용으로서의 적정도료를 결정하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제34권1호
• /
• pp.32-39
• /
• 2006

본 연구는 현악기에 사용되는 현악기용 도료가 현악기의 음향성능에 미치는 영향을 조사하였다. 음향분석장치(FFT)를 이용하여 목재악기용 도료의 도막두께에 따른 음향적 성능을 평가하였다. 목재악기용으로 사용된 도료는 악기용 우레탄계 상도도료, 오일 스테인계 도료, 자외선 경화형 에폭시 도료이다. 형성된 도막의 음향적인 특성은 FFT 분석기에서 측정된 공명주파수와 댐핑값(damping factor)으로부터 동적탄성계수와 전단탄성계수를 계산하여 얻고, 밀도와의 관계와 탄성계수간의 관계를 통하여 도막의 두께에 따른 음향적인 특성을 측정하고 비교분석하여 상관관계를 조사하였다.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.44-53
• /
• 2014

This research were aimed at developing starches which have high preservability and high bonding strength from corn starch, modified cationic and oxidized corn starches, as compared to the fermented wheat starch. On the lining that attaching the base paper on the back of the work with paste, the coating weight was determined by the solid contents of the paste rather than the viscosity of paste. Adhesive strength and stiffness were also determined by the solid contents of the paste. Corn starch had lower solid contents, higher viscosity, and higher adhesive strength than other starches. In the iodine stain to the surface of peeled base paper off, paste deeply penetrated into the traditional Hanji than modern Hanji. And oxidized starch paste deeply penetrated into the paper layer than the cationic starch.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.659-662
• /
• 2009

본 연구는 건축자재로 널리 사용되는 PVC 바닥상재 표면의 오염성 및 정전기로부터 보호하기 위하여 기존에 사용하는 광경화형 우레탄-아크릴 수지에 내오염/대전성을 향상시킨 광경화형 내오염 코팅액 개발에 관한 것이다. PVC 바닥상재용으로 사용되는 내오염성이 없는 우레탄-아크릴 수지에 4가 암모늄을 사용한 수용성 대전방지제와 아크릴용 대전방지제, 폴리우리탄용 대전방지제를 수지의 양 대비 함량(wt%) 5~20%로 변화하여 첨가한 후 1000rpm에서 30분간 고속 배합하여 수지의 내오염/대전성을 향상시킨 내오염 코팅액을 제조하였다. 제조한 내오염 코팅액은 코팅 층의 두께조절이 가능한 코팅(Bar-coating)을 사용하여 PVC 바닥상재에 코팅 한 후 내오염성, 대전성, 부착력, 코팅두께 등의 코팅 층 표면물성을 평가하였다. 연구결과, 수지에 수용성대전방지제 15%를 혼합하여 제조한 코팅액을 Bar-coater No.12로 코팅한 코팅표면이 전기저항($3.24{\times}10^9{\Omega}/cm^2$), 내오염도(매직 Test, 먼지부착 Test) 및 부착력(100%) 모두 가장 좋은 물성을 보였으며, 전반적으로 함량이 많을수록 전기저항과 오염도에서 우수한 것으로 나타났다. 그러나 대전방지제가 과량으로 들어간 경우 migration 현상이 보이는 것을 알 수 있었다.

• 한국염색가공학회지
• /
• 제35권1호
• /
• pp.42-65
• /
• 2023

Leather is widely used in human lives and many industries, and the market size continues to grow. In terms of quality and durability, natural leather is still being used as the most luxurious product. And synthetic leather, made of polyvinyl chloride (PVC) and polyurethane (PU), were developed and being widely have been used as alternative materials for natural leather. Processes, properties and issues of these leather were reviewed. Then silicone leather was reviewed why they can be good candidates for leather. Properties of general silicone polymers and silicone rubber coating agents were reviewed such as eco-friendliness, human-friendliness, stain resistances, resistance to uv light and ozone, heat stability and so on. Papers and patents related to silicone leather were studied to understand current status of development and commercialization of silicone leather. Finally direction of development was described how to improve deficient performances of current silicone leather, such as formulation of silicone, combination with organic materials and manufacturing processes.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.239-246
• /
• 2010

When galvanized steel strip is produced through a continuous hot-dip galvanizing process, the thickness of the adhered zinc film is controlled by impinging a thin plane nitrogen gas jet. The thickness of the zinc film is generally affected by impinging pressure distribution, its gradient and shearing stress at the steel strip. These factors are influenced by static pressure of gas spraying at air knife nozzle, a nozzle-to-strip distance and strip and a geometric shape of the air knife, as well. At industries, galvanized steel strip is produced by changing static pressure of gas and a distance between the air knife nozzle and strip based on experimental values but remaining a geometric shape of nozzle. Splashing and check-mark strain can generally occur when a distance between the air knife nozzle and strip is too short, while ability of zinc removal can lower due to pressure loss of impinging jet when a distance between the air knife nozzle and strip is too long. In present study, buckling of the jet and change of static pressure are observed by analyzing flow characteristics of the impinging jet. The distance from the nozzle exit to the strip varies from 6 mm to 16 mm by an increment of 2 mm. Moreover, final coating thickness with change of a distance between the air knife nozzle and strip is compared with each case. An ability of zinc removal with the various distances is predicted by numerically calculating the final coating thickness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.582-585
• /
• 2004

Pb0.5Sr0.5TiO3 (PST) thin films were fabricated by the alkoxide-based sol-gel process using spin-coating method on Pt/Ti/SiO2/Si substrate. The PST films annealed from 500C to 650C for 1h show a perovskite phase and dense microstructure with a smooth surface. The grain size and dielectric constant of PST films increases with the increase in annealing temperature, which reduces the SiO2 equivalent thickness of the PST film. The crystallinity or internal strain in the PST thin films analyzed from the diffraction-peak widths correlate well with the decrease in the dielectric losses. The dielectric constants and dielectric loss (%) of the PST films annealed at 650c (teq : 0.89 nm) were 549 and 0.21%, respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.63-70
• /
• 1999

Some deep drawing characteristics to the elevated temperatures were investigated for the SCP1 steel sheets by using the Cr-coated die. For this investigations six steps of temperature ranges from room temperature to 25$0^{\circ}C$ and six kinds of drawing ratio from 2.4 to 2.9 were adopted. As a result the limiting drawing ration maximum drawing force and the maximum drawing depth were sensitively affected by the elevated temperatures and the more stable thickness strain distribution was observed to the elevated temperatures, Some experimental results were compared with analytical results using the DYNA-3D code.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 2부
• /
• pp.953-956
• /
• 2010

본 연구에서는 건축자재로 널리 사용되는 PVC바닥상재 표면에 내오염성과 항균성을 증가시키기 위한 광경화형 코팅액 개발에 관한 것이다. PVC 바닥상재용으로 사용되는 우레탄-아크릴 수지에 수용성 대전방지제와 항균제를 배합하여 오염 및 정전기로부터 보호하고 미생물에 의한 전염성질환을 예방할 수 있는 광경화형 내오염/항균 코팅액에 관한 실험을 수행하였다. 연구결과, 수지에 수용성대전방지제 15%와 항균제 1%를 혼합하여 제조한 코팅액을 Bar-coater No.12로 코팅한 표면이 전기저항($10^9\Omega/cm^2$), 내오염도(매직 Test, 먼지부착 Test) 및 부착력(100%) 양호, 항균성(99.99%)로 가장 좋은 물성을 보였다.

• 한국표면공학회지
• /
• 제22권1호
• /
• pp.17-25
• /
• 1989

The structural Charactesties and adhesion of chemically vapor deposited TiN film on stain less steels have been investated as functions of deposition temperature, surface roughness of sub state, and types of substrates. The grain zine and the lattice parameter of TiN film decreased with decreasing roughness of substates. The(200) preferred orientation was developed dominatly and the lattlice parameter decreased as temperature intereased reardless of the surdless roughnessand type of the substrates used. The surface morphology of TiN film changed from bushed crystal to a plate and then to pyamidal dense crystals with an increase in the deposition temperature. The adhesion of TiN films increased with coating thinkness and decreased with surface roughness in general. The calculations using a Bejamin & Weaver's model have been compard. Maximum valuse of adhesion energy calculated using Laguier's model were W304=331Jm-2,w410=113Jm-2,andW430=107jm-2