• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.555-556
• /
• 2018

• Fire Science and Engineering
• /
• v.34 no.2
• /
• pp.147-155
• /
• 2020

This paper presents a study on the development of a fire extinguishing agent and extinguishing system for an energy storage system (ESS) fire. The fire extinguishing agent designed to extinguish an ESS fire is a highly permeable fire extinguisher that reduces the surface tension and viscosity while bringing about cooling action. This is the main extinguishing effect of this type of wetting agent, which displays the characteristics of fire extinguishing agents used for penetrating the battery cells inside the ESS module. For the fire extinguishing system, a local application system was designed to suppress fire on a rack-by-rack basis. A 360° rotating nozzle was inserted into the rear hall of the ESS module, and general nozzles were installed in the rack to maximize the fire extinguishing effect. The fire extinguishing agent was strongly discharged by virtue of the gas release pressure. Experiments on fire suppression performance with ESS module 1 unit and module 3 units showed that all visible flames were extinguished in 8 s and 9 s, respectively, by the fire extinguishing agent. In addition, based on confirming reignition for 600 s after the fire extinguishing agent was exhausted, it was confirmed that the ESS fire was completely extinguished without reignition in all fire suppression performance experiments.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.243.1-243.1
• /
• 2003

The pharmacokinetics of eupatilin (an active components of Stillen, a new antigastritic agent) were investigated using UV-HPLC method. The quantitation limit of eupatilin was 10 ng/ml in plasma. After intravenous administration of eupatiln, 30 mg/kg to rats, the plasma concentrations of unchanged eupatilin declined rapidly with the mean terminal half-life of 0.101 hr. Total body clearance was 121 ml/min/kg, and fractions of dose excreted in urine and feces for 24 hr were only 2.5% and 0.919%, respectively. (omitted)

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.456-460
• /
• 2008

This study was on basic step to develop a good clean extinguishing agent. In order to get a satisfactory result, we tested fire extinguishing ability using Novec which is inert gas. In study used to Cup Burner Test its made by international standard ISO-14520 regulations of gaseous extinguishing agent ability test. The finding is that a new clean agent, Novec has a very efficient extinguishing ability in a state of gas.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.93-96
• /
• 2005

High temperature furnace such as Steam power plant and incinerator contribute considerable part of NOx generation and face urgent demand of De-NOx system. Reducing agents are necessary to use De-NOx system. In this study mixing caused by direct injection of reducing agent solution spray into flue gas duct was measured. Carbonated water was used as tracer and simulated agent because ammonia as a reducing agent is not proper to experiment. Mixing and evaporation must occur simultaneously and quickly enough to achieve desirable efficiency. To achieve that, the angle of attack of static mixer and the location is simulated and $CO_2$ concentration is measured.

• Journal of ILASS-Korea
• /
• v.11 no.1
• /
• pp.30-38
• /
• 2006

High temperature furnaces such as power plant and incinerator contribute considerable part of NOx generation and face urgent demand of De-NOx system. Reducing agent is injected into the flue gas flow to activate do-NOx system. Almost SCR system adopt vaporized ammonia injection system. Vaporizer, dilution system and additional space are needed to gasify and inject ammonia. Liquid spray injection system can simplify and economize post-treatment system of flue gas. In this study, mixing caused by gas or liquid injection of reducing agent into flue gas duct was investigated experimentally. Carbonated water was used as tracer and simulated agent and mixing of liquid spray in a duct flow was studied. To achieve that, the angle of attack of static mixer is simulated and $CO_2$ concentration is measured.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1165-1168
• /
• 2005

현재 이동성을 지원하는 Mobile IPv4 와 Mobile IPv6 프로토콜은 서로 다른 버전의 네트워크에서는 호환이 불가능하게 설계되어있다. Mobile IPv6 프로토콜에서 확장되어 네트워크 이동성까지 지원되는 Network Mobility(NEMO) 프로토콜 역시 IPv6 네트워크 내에서만 이동성이 보장된다. 그러나 앞으로의 인터넷은 IPv4 와 IPv6 네트워크가 상당기간 공존할 것으로 예상되기 때문에 두 버전의 네트워크 사이에 이동성이 자연스럽게 지원되는 방안이 필요하다. 따라서 본 논문에서는 다른 버전의 네트워크 사이에 NEMO 프로토콜에 대해 이동성을 지원하기 위한 방법을 제안한다. 우리는 Mobile Router(MR)가 IPv4 네트워크로 이동을 한 경우에도 Tunnel Agent(TA)를 통해 NEMO 터널을 유지함으로써 이동성을 관리할 수 있는 새로운 메커니즘을 제시한다.

• Journal of Biomedical Engineering Research
• /
• v.9 no.1
• /
• pp.67-72
• /
• 1988

Poly (HPMA/NVP) hydrogel was synthesized according to the composition and the con- centration of the crosslinking agent. The swelling degree of the P(HPMA/NVP) hydrogel decreased with increasing of P(HPMA) composition and crosslinking agent. The glass transi- tion and softening temperatures of the P(HPMA/NVP) increased with increasing of P(HPMA) composition. The composition of P(HPMA/NVP) : 70/30 and the concentration of the crosslin- king agent of 0.5 wt % gave the optimum condition in the application to the contact lens. There were also adequate in the mechanical, refractive properties and in vivo test in the P(HPMA/ NVP): 70/30 system.

• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.61-67
• /
• 1999

Silicone oil has organic and inorganic properties, and its skeleton is polysiloxane bonding that silicon is bonded hydrogen or organic group. Silicone compounds are very smooth and lubricant properties by low surface tension, low temperature dependence, and nonadhesive properties. Because of these properties, silicone compounds are used as many parts of chemicals, softener, smooth and libricant agents, water-repellent agent, and defoaming agent, etc. Emulsion was prepared with the inversion emulsification method which adopted the agent-in-oil method dissolving the polyoxyethylene(7) tridecyl ether(HLB 12.2) into methoxy terminated poly(dimethyl-co-methyl amino) siloxane and hydroxy terminated poly(dimethyl-co-methyl amino) siloxane in water. At this time, processed emulsion was almost microemulsion. When ratio of emulsifier increases, emulsion is stable bacuause microemulsion is solubilized by emulsion drop size and zeta-potential are decreased. But, when amount of electrolyte is increase, emulsion became unstable because emulsion drop size is increased.

• Journal of dental hygiene science
• /
• v.9 no.2
• /
• pp.153-160
• /
• 2009

The purposed of this study was to investigate the effect of Gold bonding agent as intermediate layer between metal substrate and ceramic coating. Gold bonding agent used to seal off any surface porosity, to mask the greyish color of the metal, and to provide an underlying bright golden hue to the ceramic coverage. The adhesion between metal substrate and ceramic is related to diffusion of oxygen during ceramic firing. The oxide layer produced on non-precious alloy anti titanium was considered to have a potentially adverse effect on metal-ceramic bonding. The oxidation characteristics of titanium and non-precious alloys are the main problem. Every group were divided into test and control groups. Control groups are carried out process of degassing for product oxide layer. Au coating was applied on each Ni-Cr, Co-Cr alloys and cp-Ti specimens with difference surface condition or degassing. Specimens surfaces and cutting plane was characterized by SEM/EDS. Results suggested that Au coating is effective barriers to protect metal oxidation during ceramic firing.