• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.109-114
• /
• 2008

The solenoid valve of ABS hydraulic modulator is a two directional on-off valve and is controlled by around 100Hz on-off control. When the on-off valve is switched from open state to closed state, there are braking force deterioration, noise and vibration due to surge pressure in the wheel cylinder. In this study, identifies surge pressure in the braking process of ABS, and investigates the way to reduce the phenomenon. To reduce the surge pressure, PWM(Pulse Width Modulation) control with high frequency of 20kHz was attempted. In conclusion, by using the results of this study for the pressure surge prediction, we could expect enhancement of braking performance in ABS.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.70-79
• /
• 2012

A design guide to type-3 PLLs for FMCW radars is provided. To do that, the cross-over frequencies of the open-loop transfer functions were normalized to 1 Hz and closed-loop properties were compared through simulations using Pspice. As a result, several guides to design type-3 PLLs were provided: 1) secure 45 degrees of phase margin, 2) locate two zeroes at an identical frequency, and 3) poles may be added to raise order of the PLL at higher frequencies than the cross-over frequency of the open-loop transfer function about ten times.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.2
• /
• pp.38-50
• /
• 1982

A new type of digital phase-locked loop (DPLL) called the modified digital Costas loop is proposed and analyzed. The main feature of the proposed loop is that the phase error detector of the loop has linear characteristic. This results from the use of the tan-1 (.) function in the loop. Accordingly, the DPLL can be characterized by a modulo-2$\pi$ linear difference equation. This paper is diveide into two parts. In Part I we describe the proposed system, and analyze the performance of the first-and second-order loops in the absence of noise by the Phase Plane technique. The locking ranges for the DPLL's to achieve exact locking independently of initial conditions have been obtained in closed forms. Also, the false lock and oscillation phenomena occurring under some initial conditions have been considered. These results have been verified by computer simulation. In Part ll we analyze the proposed system in the presence of noise. The steady state probability density function, mean and variance of the phase error have been obtained by solving the Chapman-Kolmogorov equation. These results will be presented in Part ll.

• Structural Engineering and Mechanics
• /
• v.69 no.6
• /
• pp.615-626
• /
• 2019

The 3-noded metric Timoshenko beam element with an offset of the internal node from the element centre is used here to demonstrate the best-fit paradigm using function space formulation under locking and mesh distortion. The best-fit paradigm follows from the projection theorem describing finite element analysis which shows that the stresses computed by the displacement finite element procedure are the best approximation of the true stresses at an element level as well as global level. In this paper, closed form best-fit solutions are arrived for the 3-noded Timoshenko beam element through function space formulation by combining field consistency requirements and distortion effects for the element modelled in metric Cartesian coordinates. It is demonstrated through projection theorems how lock-free best-fit solutions are arrived even under mesh distortion by using a consistent definition for the shear strain field. It is shown how the field consistency enforced finite element solution differ from the best-fit solution by an extraneous response resulting from an additional spurious force vector. However, it can be observed that when the extraneous forces vanish fortuitously, the field consistent solution coincides with the best-fit strain solution.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.255-262
• /
• 2018

In order to determine the three-dimensional position in photogrammetry, a spatial resection is a pre-requisite step to determine exterior orientation parameters. The existing spatial resection method is a non-linear equation that requires initial values of exterior orientation parameters and has a problem that a gimbal lock phenomenon may occur. On the other hand, the spatial resection using quaternion is a closed form solution that does not require initial values of EOP (Exterior Orientation Parameters) and is a method that can eliminate the problem of gimbal lock. In this study, to analyze the stability of the quaternion-based spatial resection, the exterior orientation parameters were determined according to the different layout of control points and were compared with the determined values using existing non-linear equation. As a result, it can be seen that the quaternionbased spatial resection is affected by the layout of the control points. Therefore, if the initial value of exterior orientation parameters could not be obtained, it would be more effective to estimate the initial exterior orientation values using the quaternion-based spatial resection and apply it to the collinearity equation-based spatial resection method.

• The korean journal of orthodontics
• /
• v.22 no.2 s.37
• /
• pp.345-372
• /
• 1992

The purpose of this experiment was to study the effects of changes of mandibular position on temporomandibular joint in internal derangement patients Twenty-four female New Zealand White Rabbits, weighing over 3.5kg, were utilized in this study . Bilateral temporomandibular joint surgery was performed in twenty-one of the rabbits to displace disc anteriorly through incising the retrodiscal tissue 1-2mm posterior to the disc, thus inducing internal derangement. They were divided into three groups nine were left untreated after surgery, six were fitted with functional protrusive appliances 4 weeks after surgery, and six wore collar appliances to apply 4 ounces of mandibular refractive force per side 4 weeks after surgery. The remaining three served as the control group. Histologic examinations were performed after sacrificing them by threes at 4-week intervals. The results were as follows. 1. Histologic findings similar to internal derangement were observed in the rabbits whose retrodiscal tissues had been incised. 2. In the rabbits untreated after surgery, articular surface on condylar process and articular eminence showed severe erosion and deformation, and displaced disc manifested changes in both shape and internal architecture. 3. Functional protrusion after surgery resulted in progressive remodeling on postero-superior portion of condyle and glenoid fossa, while it also brought about erosion on articular eminence and anterior portion of condyle. 4. Mandibular retraction after surgery resulted in compression of retrodiscal tissue and regressive remodeling of posterior portion of condyle.

• Journal of Oral Medicine and Pain
• /
• v.20 no.1
• /
• pp.159-169
• /
• 1995

The purpose of this study was investigating the effects of pivot splint on width of the temporomandibular joint space in order to get the basic data for clinical applications. Pivot splint could be used for treating the patients with temporomandibular disorders, especially for chronic closed lock which would not be reduced by joint manipulation or with other methods. So it is necessary to have a lot of underlying data for using pivot splint, but there is few available reports related to mechanical principle or clinical results of the splint. Healthy twenty dental students wee collected for this study and pivot splint with 2.5mm high right-side pivot was used. Next, transcanial projection was taken and width of joint space at there mandibular positions were measured : habitual occlusion position, clenching position with splint, and clenching position with splint and mandibular force. The data were processed with SAS statistical program. The obtained results were as follows : 1. Ipsilateral posterior joint space width was increased on clenching the pivot splint, but joint space widths of contralateral side were not significantly changed. 2. Superior and posterior joint space width were increased on clenching the pivot splint with mandibualr force on both ipsilateral and contralateral side. 3. Ipsilateral joint space widths were not significantly changed from habitual occlusion position to clenching the pivot splint with active mandibular force, but in case of with passive mandibular force, posterior joint space width was significantly increased. 4. Correlationships between mandibular positions were more significant at anterior joint space than at superior or posterior joint space. But the correlation between clenching and clenching with mandibular force was significant at all the three joint space.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.4
• /
• pp.270-274
• /
• 2010

Introduction: Limited mouth opening is a representative clinical symptom of temporomandibular disorders (TMD) with anterior disc displacement without reduction (ADDWOR). Various treatment methods have been proposed for patients with ADDWOR. This study examined the clinical effectiveness of template therapy for patients with mouth opening difficulty due to the ADDWOR. Material and Methods: A total of 14 patients (female 12, male 2, average age: $29.1{\pm}14.4$), who had been treated in the template clinic, Sooncheonhyang University Bucheon Hospital, from January of 2006 to December of 2008, were enrolled in this study. The subjects were selected according to the following criteria: more than 2 weeks after the onset of locking, mouth opening range <35 mm, and confirmed ADDWOR without a synovial pathology by magnetic resonance imaging (MRI). All patients were treated with the template appliance, instructed to wear it while sleeping and exercise for at least 10 hours per day. The maximum mouth opening (MMO) range and pain recognition scores before and after template therapy were recorded and compared. A paired t-test and Wilcoxon's signed rank test were used for statistical analysis. Results: After the periodical follow up, significant improvement in the opening range was observed in the template treatment group. The average MMO range before treatment was $30.2{\pm}3.5mm$ and the average MMO after treatment and follow up was $47.1{\pm}4.7mm$. The mean amount of mouth opening increment was $16.9{\pm}5.4mm$ (P<0.01) and the pain recognition scores before and after treatment was also improved.(P=0.001) Conclusion: The template appliance proved to be efficient for the treatment of TMD with a closed lock and painful joint due to ADDWOR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.80-87
• /
• 2006

SONY corporation preoccupies $80\%$ of a market of the CCD used in a CCTV system. The CCD of SONY have high duality which can not follow the progress of capability. But there are some problems which differ the clock frequency used in CCD from the frequency used in common video encoder. To get the result by using common video encoder, the system needs a scaler that could adjust image size and PLL that synchronizes CCD's with encoder's clock So, this paper proposes the video encoder that is activated at equal clock used in CCD without scaler and PLL. The encoder converts ITU-R BT.601 4:2:2 or ITU-R BT.656 inputs from various video sources into NTSC or PAL signals in CVBS. Due to variable clock, property of filters used in the encoder is automatically changed by clock and filters adopt multiplier-free structures to reduce hardware complexity. The hardware bit width of programmable digital filters for luminance and chrominance signals, along with other operating blocks, are carefully determined to produce hish-quality digital video signals of ${\pm}1$ LSB error or less. The proposed encoder is experimentally demonstrated by using the Altera Stratix EP1S80B953C6ES device.

• Journal of Oral Medicine and Pain
• /
• v.20 no.1
• /
• pp.141-158
• /
• 1995

This study was performed to invetigate the relationship between clinical manifestations related to temporomandibular joint sounds and temporomandibular joint vibrations that occurred synchronously with sounds. There have been reported in many articles that joint sounds indicate internal joint pathology. Therefore, it is necessary to evaluate type and patterns of joint sounds, and radiographic changes of temporomandibular joint(TMJ) in order to diagnose and deal with the Temporomandibular Disorders(TMD). For this study 142 patients with TMDs were collected and they were examined by routine diagnostic procedure for TMDs. The author classified TMJ sounds clinically into 3 types : click, popping, and crepitus. Transcranial and panoramic radiographs were taken for observein bony changes of TMJ, and for observing vibrations of TMJ Sonopak of Biopak system was used. The obtained results were as follows : 1. Female subjects with crepitus were older than those with click or popping and their mean ages were about 45 years old. But in male subjects, there was no age difference. 2. For all subjects, mean value of maximal mouth opening were above 40mm, which are lower limit of normal vertical opening. But in subjects with L-type opening deviation, mouth opening capacity were about 36mm of range. 3. Symptom duration stated when patient presented first were slightly longer in subjects with crepitus but there were no statistical differences. And there were also no radiographic differences among 3 types of joint sounds in regard to symptom duration. 4. In subjects wih click, it might have been interpreted that 12% had closed lock, 12% had degenerative joint disease, and about 17% of he subjects had normal joints by Sonopak. 5. There were no significant relationships between subjective loudness of joint sounds and magnitude of joint vibrations. 6. The highest value of Integral and peak amplitude were observed in popping sounds and though it was not significant, value of peak frequency was highest in crepitus. 7. Amount of mandibular positional change were differed between click and crepitus on frontal plane, between click, crepitus and popping on horizontal plane in rotational movement, respectively. However, there no difference among them in translational movements.