• 센서학회지
• /
• 제9권1호
• /
• pp.51-60
• /
• 2000

본 논문에서는 정상류형 혈액 펌프의 일종인 축류형 혈액 펌프를 이용하여 혈액 펌프 시스템을 설계하였다. 이 시스템은 혈액 펌프, 신호 획득부, 인터페이스부, 신호 처리부로 구성되어 있고, 혈압과 심박수를 이용하여 혈압과 혈류량을 적절히 제어함으로써 좌심실의 기능을 보조할 목적으로 연구되었다. 전동 펌프가 회전할 때 생체내의 순환조건에 알맞도록 혈액 펌프의 회전수, 혈액 펌프에 걸리는 부하와 압력 정보를 적용하여 실험식을 만들어 제어에 이용하였으며 설계 제작된 모의 순환장치로써 실험한 결과 모의 혈관 내에서 적절한 혈압과 혈류의 제어가 가능하였고, 혈구의 변화량 실험 결과는 임시의 목적으로 사용가능 함을 알 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.12-18
• /
• 2013

Domestic solar hot water system can be divided into a passive type and an active type. In a passive type the storage tank is horizontally mounted immediately above the solar collectors. No pumping is required as the hot water naturally rises into the storage tank from the collectors through thermo-siphon flow. While, in an active type the storage tank is ground- or floor-mounted and is below the level of the collectors; a circulating pump moves water or heat transfer fluid between the storage tank and the collectors. We installed two types solar hot water systems consisting of the same storage tank and collectors at the same place, and were measured and compared typical operating characteristics under the same external conditions. In particular, the daily system performance was presented through the stirring test after the sunset. The results show that the amount of solar radiation obtained for an active type were less than a passive type on a cloudy day, because the operation of the circulation pump stops frequently took place on that day. However, on a sunny day, depending on the stable operation of the circulation pump, the amount of solar radiation obtained for an active type were increased than a passive type.

• 설비공학논문집
• /
• 제29권1호
• /
• pp.38-42
• /
• 2017

This study proposes an idea for energy saving in apartment machine rooms. A conventional district heating system is equipped with constant-flow pumps and bypass valves to regulate pump differential pressure. Each family unit is equipped with a constant-flow on/off valve. This leads to excessive hot water circulation and a high return temperature. To reduce energy loss, this study assumes that each family unit is renovated with a heating valve which regulates the return temperature at $35^{\circ}C$. The hot water supply pump is also replaced with a pump with an inverter to vary flow rate. Expected energy savings is then estimated from field test data. According to the results, pump electricity consumption was reduced by 6,100 kWh for a family unit building over about half a year. The supply temperature can also be lowered by $5^{\circ}C$, which can contribute to a production of electricity of 10.3 kWh/ton of hot water.

• 신재생에너지
• /
• 제5권4호
• /
• pp.60-65
• /
• 2009

The present study was conducted for a comparative evaluation of wet and dry floor heating systems using geothermal heat pump. We circulated hot water from geothermal heat pump which is $10{\sim}15^{\circ}C$ lower than that from boiler. In order to access indoor temperature ($25^{\circ}C$) it took 74 minutes for dry type and 247 minutes for wet type. Average floor temperature was $23.9^{\circ}C$ for wet type and $32.7^{\circ}C$ for dry type. Energy saving rate gradually increased by 66% after 138 minutes. As a result, in case of floor heating system using low temperature circulation water, dry type was more practicable for stable floor heating than wet type in terms of floor temperature and access time to indoor set temperature.

• Journal of Chest Surgery
• /
• 제38권1호
• /
• pp.13-22
• /
• 2005

배경 : 심장수술과 같은 체외순환(Extracorporeal circulation)이 요구되는 상황에서 조직관류에 우월할 것으로 보이는 박동성 혈류장치를 이용하려는 시도가 계속되어 왔다. 본 연구에서는 체외순환 조건에서 박동 혈류가 비박동 혈류보다 조직관류에 우월하다는 가설을 직접 증명하기 위해 치근 개발된 조직관류측정기($QFlow^{TM}-500$ Perfusion Measurement System, Thermal Technologies Inc.,Cambridge, MA, USA)의 열확산 탐침(Thermal Diffusion Probe)으로 조직 관류량을 실시간 및 연속적으로 직접 측정함으로써, 체외순환에서 박동 혈류와 비박동 혈류가 신장에 미치는 영향을 직접 관찰하고자 하였다. 대상 및 방법: 몸무게가 25 kg에서 40 kg 사이의 돼지를 암수 구별 없이 총 12마리를 각각 6마리씩 두개 군으로 나누어 실험을 진행하였다. 동물의 심장을 노출시킨 후, 좌측 측하복부를 절개하여 좌신장을 노출하여 관류측정기의 열확산 탐침을 신장의 피질내에 $2\~3$ cm 깊이로 거치하였다. 9볼트의 배터리로 심정지를 유도하면서 대동맥 차단을 하여 총심폐우회술을 시행한 후, 1군(n=6)은 Biopump에, 2군(n=6)은 박동식 혈류를 제공하는 T-PLS (Twin-Pulse Life Support System)에 연결하였다. 실험 동안 pump flow는 2 L/min로 유지하였다. 체외순환 전과 시작 후 10분마다 심박수, 혈압, 및 신장 관류치를 측정하여 60분까지 측정하고, 동맥혈가스분석, 전혈구 계산, 혈액 뇨질산, 크레아티닌 및 혈장 용혈헤모글로빈을 체외순환 시작 전과 60분 후에 측정하였다. 결과: 두 군 사이에 기초치는 유사하였다. 평균 혈압은 체외순환 전에는 두 군 간에 차이가 없었으나, 체외순환 20분 이후부터는 2군에서 높은 경향이 있었고(1군 $39.84\~45.5$ mmHg, 2군 $48.7\~52$ mmHg), 특히 60분에서의 평균혈압은 통계적으로 유의한 차이를 보였다(1군$\;41.2{\pm}4.3\;mmHg,\;48.7{\pm}5.4\;mmHg,\;p=0.023$). 체외순환 전 측정한 신장 관류치는 두 군간에 차이가 없었으나, 체외순환을 시작한 이후부터는 2군에서 지속적으로 더 높은 경향이 있었으며(1군 $48.5\~64$ mL/min100 g, 2군 $65.8\~88.3$ mL/min/100 g), 특히 30분에서의 측정값은 통계적으로 유의한 차이를 보였다(1군$47.5{\pm}18.3\;mL/min100\;g,$ 2군$83.4{\pm}28.5\;mL/min100\;g,\;p=0.026$). 혈액 뇨질산, 크레아티닌, 그리고 혈장 용혈헤모글로빈의 변화는 두 군간에 차이가 없었다. 결론: 일정한 펌프 혈류 조건에서 박동성 혈류의 평균 혈압이 더 높다는 것은, 비박동성 혈류보다 조직관류압(Tissue Perfusion Pressure) 측면에서 우수하여 말초장기의 조직관류 효과에 유리한 요인이라고 볼 수 있다. 본 연구를 토대로 장시간의 체외순환에서는 신장기능을 대표하는 수치들에도 영향을 미칠 수 있으리라 예상되며, 신장 이외에 다른 주요 장기에 미치는 영향에 대한 연구를 더 진행할 필요가 있을 것으로 생각한다.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.83-92
• /
• 2019

A pump is considered to be submersible when a motor and a pump are integrated and operate while submerged in water. Submersible pumps mainly function as rejection pumps to prevent foods in densely populated areas, as cold water circulation pumps in large power plants, as pumps to supply irrigation water, as drainage pumps to prevent flooding of agricultural lands, as water supply intake pumps, and as inflow pumps for sewage treatment. The flow in such turbomachines (submersible pumps) inevitably involves various eddy currents. Since it is almost impossible to accurately grasp the complex three-dimensional flow structure and characteristics of a rotating turbomachine through actual testing, three-dimensional numerical analysis using computational fluid dynamics techniques measuring the flow field, velocity, and the pressure can be accurately predicted. In this study, the shape of the impeller was developed to reduce vibration and noise. This was done by increasing the efficiency of the existing submersible pump and reducing turbulence. In order to evaluate the pump's efficiency and turbulence reduction, we tried to analyze the flow using ANSYS Fluent V15.0, a commercial finite element analysis program. The results show that the efficiency of the pump was improved by 4.24% and the Reynolds number was reduced by 15.6%. The performance of a developed pump with reduced turbulence, vibration, and noise was confirmed.

• 한국태양에너지학회 논문집
• /
• 제35권4호
• /
• pp.1-7
• /
• 2015

The operation of the natural circulation type solar heating systems with facade integrated collector was analyzed by experiment. Two different types of flat plate solar collectors were used for these experiments. One was for the normal flat plate solar collector with the size of 1m*2m and the other was for the large size solar collector with $4m^2$(1m*4m). The experiments were carried out to investigate the effect of the series or parallel connection method on the performance of the collectors. As a result, the solar thermal system which is installed on the wall or facade would be applicable for the natural circulation type if the system design reflects various parameters, including collector connecting method(series or parallel), to provide enough vertical height between collector and storage tank, and to reduce pressure loss due to collector and piping network, etc. The natural circulation type of solar thermal system as proposed in this study can increase the system reliability by removing or minimizing the use of the components such as pump, controller, sensors which may cause serious troubles of the system for a long-time operation

• 한국태양에너지학회 논문집
• /
• 제27권1호
• /
• pp.47-54
• /
• 2007

Interests on renewable energy are increased due to oil price and environmental problems aroused from the fossil energy usage. In this study, performances of a solar assisted hybrid heat pump system are analyzed by experimental method. The developed system could runs at two types of operating mode. When the storage temperature is higher than the set temperature, the stored hot water in storage tank is supplied to the load directly. On the other hand, when the storage temperature lower than the set temperature, the water inside of the storage tank is used as heat source of the heat pump. In this study, the system control temperature for the alternation of the operating mode is set to $40^{\circ}C$ of the storage tank outlet. As results, it is founded that the COP of the developed heat pump system shows between 3.0 and 3.5. It is resonable performance for the heating system with a renewable energy as secondary heat source. The solar collect used in this study could supplies heat to the storage tank at over 400 W/m2 solar intensity. If the irradiation is lower than the 400 W/m2, the circulation pump stored and it could not supply heat to the storage tank. It is found that the difference temperature between the outlet of the storage tank and collector is $3^{\circ}C$. Even though, the extended study should be conducted to get a optimum performance of the developed system with various operating condition and control strategies.

• 한국해양학회지:바다
• /
• 제8권3호
• /
• pp.295-306
• /
• 2003

산업혁명 이후 인류가 과량으로 방출한 이산화탄소가 지구환경에 어떤 영향을 미치는지, 그리고 해양이 흡수하는 탄소량의 크기가 얼마인지에 대한 연구들이 진행되고 있다. 대양과 비슷한 순환 특징을 가지고 있는 동해가 이산화탄소 증가와 지구온난화에 대해 어떻게 반응하는지를 알아보기 위한 연구계획의 일환으로 탄소순환에 중요하게 기여하는 생물펌프의 크기를 간단한 상자모형을 적용시켜 추정하였다. 매개변수로는 인산염을 사용하였는데, 동해에서 일어나고 있는 수층 구조의 변화를 고려해서 해수 수지와 용존산소 수지를 맞춘 다음에, 인산염의 과거 자료를 바탕으로 인의 순환 플럭스를 모사하였다. 1952년부터 2040년까지 모사해 본 결과, 동해에서 생물펌프는 점차 강화되고 있고, 현재 0.0156 Pg C yr$^{-1}$ 정도를 해양 내부로 내보내고 있는 것으로 추정된다. 한편 동해의 해수순환은 저층수를 만드는 것이 줄어드는 반면 중앙층으로 유입이 증가하는 추세이다. 산소가 풍부한 표층수가 중앙층으로 유입되면서 유광층에서 하강한 생물입자들의 분해가 이 층에서 활발해져서 영양염을 표층으로 되돌리는 것이 강화될 것으로 보인다. 이렇게 되면 생물에 의한 탄소제거가 늘어나게 될 깃이다. 지난 50년간의 생물펌프 변화로 블 때 산업혁명 이후 생물에 의한 동해의 인류기원 이산화탄소 흡수량은 0.025 Pg C 정도로 추정된다.

• 대한기계학회논문집B
• /
• 제22권8호
• /
• pp.1083-1090
• /
• 1998

A kind of three-way check valve, so called hydraulic calve was proposed for the substitute of the density lock of passive reactor such as SPWR (System-Integrated Pressurized Water Reactor). The function of the valve are the separation of the borated water from main coolant loop for normal operation and the insurge of the water into the loop for shutdown and the removal of the decay power when the main coolant flow rate is not enough. To verify the operability and the characteristics of the valve, experimental works were executed with 1/3 scale model calve. Also a diffuser model was proposed for the theoretical analysis of the valve.